cccam-oscam Ubuntu x32-x64 and Infinity USB Phoenix

Hi guys.

I've been using my Infinity USB Phoenix with cccam and my white card without issue util the current problems.

So I've done a fresh install of debian and cccam-oscam Ubuntu x32-x64.

http://linuxsat-support.com/sh…Oscam-CCcam-2-1-3-Install

OSCam detects the card reader and the CCCam clients connect.

The only issue, and it's a big one, nothing clears.

The card reader is a serial device.

I've read this post but the fix isn't in my webif.

http://linuxsat-support.com/sh…x-reader-on-debian-server

1. Open oscam web info and click on readers then edit reader.
2. At the bottom of the page you will see Device Out Endpoint:
change this to "0x81: Infinity USB Smart" save & restart.
I noticed while helping another with the same hardware that the card would not read without this setting.

Below are my OSCam cofigs and a screen grab of OSCam webif

-------------------
oscam.conf
-------------------

[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1

[webif]
httpport = 8888
httpuser = **********
httppwd = **********
httpallowed = 127.0.0.1,192.168.0.0-192.168.254.254,*********
httprefresh = 15

[newcamd]
port = 10000@0963:000000
key = 0102030405060708091011121314
keepalive = 1

----------------------
oscam.server
----------------------

[reader]
label = skyuk
protocol = internal
enable = 1
device = /dev/ttyS0
caid = 0963
boxid = ******xx #( not needed as oscam can read sky uk boxid )
detect = cd
mhz = 450
cardmhz = 2700
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-g = 1
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
lb_weight = 100
ecmwhitelist = 0963@000000:3E,4F,42,44,45,47,4E,53,54,56,61,67,62 ,68,69,6A,6B,6E,6D,6F,71,72,73,77,78,74,79,7A,7C,7 D,7E,80,8B,85

-------------------
oscam.user
-------------------

[account]
user = cccam
pwd = cccam
monlevel = 0
uniq = 0
group = 1,2
au = 1

cfaced0.jpg

All help is greatly appreciated.

- - - Updated - - -

Hey.

Can an OP please move my post to the OSCam Support section.

Cheers,
hombre

Hi.

Thanks for the quick reply.

I had tried that before, unfortunately it gives an ERROR under the card reader heading.

809275928.jpg

On some reading, the protocal set to mouse relates to USB card readers (I could be wrong, I usually am) mine is a serial on com1 with USB for power.

I'm curious if the nftytool driver pack is the cause.

Also do you know how I can edit the Device Out Endpoint to
change this to "0x81: Infinity USB Smart"

Thanks again,
hombre

- - - Updated - - -