Vu+ Uno 4k - OSCAM CCCAM freeze issue

There are 12 replies in this Thread which was already clicked 6,596 times. The last Post () by choudhary.

    I'm hoping someone with more experience than me can help me out.


    I have recently bought a Vu+ Uno 4k running OpenVix and am attempting to use a CLINE provided by a friend. I have had some success, but I am currently experiencing freezing and glitching every 4 or 5 seconds.


    Here are my config files:


    Oscam.conf
    ----------------------------------------------------------
    [global]
    logfile = /dev/tty
    clienttimeout = 4000
    clientmaxidle = 300
    netprio = 1
    nice = -1
    maxlogsize = 1000
    waitforcards = 0
    preferlocalcards = 1
    dropdups = 1


    [dvbapi]
    enabled = 1
    au = 1
    pmt_mode = 0
    request_mode = 1
    user = dvbapi
    read_sdt = 1
    write_sdt_prov = 1
    boxtype = dreambox


    [webif]
    httpport = 16001
    httpshowmeminfo = 1
    httpshowuserinfo = 1
    httpshowcacheexinfo = 1
    httpshowecminfo = 1
    httpshowloadinfo = 1
    httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255,172.16.0.0-172.16.255.255
    http_status_log = 1


    Oscam.user
    ----------------------------------------------------------
    [account]
    user = dvbapi
    au = 1
    group = 1
    caid = 0963
    cccmaxhops = 5



    Oscam.server
    ----------------------------------------------------------
    [reader]
    label = CCcam
    protocol = cccam
    device = XXXXXXXXXXXXXXX
    user = XXXXXXXXXXXXX
    password = XXXXXXXXXXXXXXX
    inactivitytimeout = 1
    group = 1
    cccversion = 2.1.2
    ccckeepalive = 1


    An extract from my log file in Oscam is:


    2017/01/04 21:07:25 79DEF16F c (ecm) dvbapi (0963@000000/FFFF/C418/71:D0B50E4A1B87A2E27E145BF7C090C7BF): not found (201 ms) by CCcam - Cartoon Netwrk
    2017/01/04 21:07:25 79DEF16F c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
    2017/01/04 21:07:25 79DEF16F c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
    2017/01/04 21:07:26 79DEF16F c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0963 PROVID 000000 ECMPID 0500 ANY CHID PMTPID 0107 VPID 0901


    The Vu+ Uno is wired on LAN to my router, and my Internet connection is 78Mb Fibre - so I cant see it being latency my side.


    The annoying this is, that I have had this up and running for about 24 hours, but its been like this ever since.


    Any advice would be much appreciated.


    Cheers

    • Official Post

    Open oscam.conf and look for webif. Should look like this:
    [webif]
    httpport = 8888


    In a browser type the ip address of the uno4k and httpport, like this:
    http://192.168.1.1:8888
    Now press enter.


    You should see a proxy reader (your server) and which cards it has available..


    Try to view some channels then copy the oscam log to here (remove any sensitive details).

    • Official Post

    Click Status tab
    In proxies you will see the reader.
    The status on the server should be connected.
    Hover over connected, a box will popup, click this.
    Here you will see which Providers the server has available.
    You are looking for 0963 or 0960.
    Go back to status and scroll to the bottom of the page.
    View some channels that aren`t working and refresh the page to see what the errors are in the log..

    2017/01/15 14:23:12 4C3A51F9 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0963 PROVID 000000 ECMPID 0501 ANY CHID PMTPID 011A VPID 0A50
    2017/01/15 14:23:12 4C3A51F9 c (ecm) linuxsatsupport (0963@000000/FFFF/D020/7B:3A1D56E54646D22C8663A9694FC2F7C3): not found (4 ms) by xxxxxx - BT Sport 2
    2017/01/15 14:23:12 4C3A51F9 c (dvbapi) Demuxer 1 trying to descramble PID 2 CAID 0960 PROVID 000000 ECMPID 0508 ANY CHID PMTPID 0110 VPID 0906
    2017/01/15 14:23:13 4C3A51F9 c (ecm) linuxsatsupport (0963@000000/FFFF/D7A5/7B:6883FE0A3BE7753283CED5FD4AE2561C): not found (5 ms) by xxxxxx - BT Sport 1
    2017/01/15 14:23:13 4C3A51F9 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0960 PROVID 000000 ECMPID 0501 ANY CHID PMTPID 011A VPID 0A50
    2017/01/15 14:23:13 4C3A51F9 c (ecm) linuxsatsupport (0960@000000/FFFF/D020/7B:3A1D56E54646D22C8663A9694FC2F7C3): rejected (4 ms) by xxxxxx - BT Sport 2
    2017/01/15 14:23:13 4C3A51F9 c (ecm) linuxsatsupport (0960@000000/FFFF/D020/7B:3A1D56E54646D22C8663A9694FC2F7C3): rejected (3 ms) by xxxxxx - BT Sport 2
    2017/01/15 14:23:13 4C3A51F9 c (ecm) linuxsatsupport (0960@000000/FFFF/D7A5/7B:6883FE0A3BE7753283CED5FD4AE2561C): rejected (5 ms) by xxxxxx - BT Sport 1
    2017/01/15 14:23:13 4C3A51F9 c (dvbapi) Demuxer 1 restarting decodingrequests after 17 ms with 2 enabled and 1 disabled ecmpids!
    2017/01/15 14:23:13 4C3A51F9 c (dvbapi) Demuxer 1 trying to descramble PID 0 CAID 0963 PROVID 000000 ECMPID 0508 ANY CHID PMTPID 0110 VPID 0906
    2017/01/15 14:23:13 4C3A51F9 c (ecm) linuxsatsupport (0960@000000/FFFF/D7A5/7B:6883FE0A3BE7753283CED5FD4AE2561C): rejected (3 ms) by xxxxxxx - BT Sport 1
    2017/01/15 14:23:13 4C3A51F9 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 2 enabled and 1 disabled ecmpids!
    2017/01/15 14:23:13 4C3A51F9 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0963 PROVID 000000 ECMPID 0501 ANY CHID PMTPID 011A VPID 0A50
    2017/01/15 14:23:13 4C3A51F9 c (ecm) linuxsatsupport (0963@000000/FFFF/D020/7B:3A1D56E54646D22C8663A9694FC2F7C3): not found (6 ms) by xxxxxxs - BT Sport 2

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login