Smargo Card reader READER DEVICE ERROR

**icecool_denmark** · Jan 9th 2017

Good morning who can tell what`s wrong i cant get my Smargo card reader to work whit open pli 4.0
i use it in Vy+ 4k it said READER DEVICE ERROR i send my oscam config files
oscam.conf
[global]
nice = -1
logfile = /var/log/oscam.log
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[dvbapi]
enabled = 1
user = linuxsatsupport
boxtype = dreambox
au = 1

[cccam]
port = 12000
version = 2.1.3
build = 3165
reshare = 1

[newcamd]
key = 0102030405060708091011121314
port = 34001@093E:000000;34002:0b00:000000

[webif]
httpport = 8888
httpuser =
httppwd =
httprefresh = 15
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255

[monitor]
appendchaninfo = 1

[global]
nice = -1
logfile = /var/log/oscam.log
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[dvbapi]
enabled = 1
user = linuxsatsupport
boxtype = dreambox
au = 1

[cccam]
port = 12000
version = 2.1.3
build = 3165
reshare = 1

[newcamd]
key = 0102030405060708091011121314
port = 34001@093E:000000;34002:0b00:000000

[webif]
httpport = 8888
httpuser =
httppwd =
httprefresh = 15
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255

[monitor]
appendchaninfo = 1

oscam.user
[account]
user = linuxsatsupport
keepalive = 1
au = 1
group = 1,2

oscam.server
[reader]
label = canal-digital
protocol = internal
device = /dev/sci0
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1

[reader]
label = viasat
protocol = internal
device = /dev/sci1
boxid = *********************
detect = cd
mhz = 450
cardmhz = 2700
group = 2
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-g = 1

[reader]
label = hd01
protocol = smargo
device = /dev/ttyUSB1
caid = 1830
boxkey = xxxxxxxxxxxxx
rsakey = ***************
ecmwhitelist = 1830:92
detect = cd
mhz = 534
cardmhz = 343
ident = 1830:000000,003411,008011
group = 2
emmcache = 1,3,2,0
auprovid = 003411

- - - Updated - - -

i just scan my usb and then i got all this Bus 005 Device 002: ID 148f:5372
Bus 008 Device 002: ID 0403:6001
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0003
Bus 003 Device 001: ID 1d6b:0002
Bus 004 Device 001: ID 1d6b:0002
Bus 005 Device 001: ID 1d6b:0002
Bus 006 Device 001: ID 1d6b:0002
Bus 007 Device 001: ID 1d6b:0001
Bus 008 Device 001: ID 1d6b:0001
Bus 009 Device 001: ID 1d6b:0001
Bus 010 Device 001: ID 1d6b:0001
so where did i put in now

**master G** · Jan 9th 2017

Have you tried inserting the smargo into other usb ports ? (restart oscam after changing port)

Or tried changing the device to ttyUSB0 or ttyUSB2 ?

robertjust · Jan 9th 2017

change device in red...

[reader]
label = hd01
protocol = smargo
device = 005:002
caid = 1830
boxkey = xxxxxxxxxxxxx
rsakey = ***************
ecmwhitelist = 1830:92
detect = cd
mhz = 534
cardmhz = 343
ident = 1830:000000,003411,008011
group = 2
emmcache = 1,3,2,0
auprovid = 003411

johndeere88 · Jan 9th 2017

Your viasat card and your 1830 card are both selecting group 2 ! so thats another thing you could try addressing.

Incidentally and not sure this would cause a conflict but i notice you have 2 other internal card readers activated with no caid or ident entered.

**icecool_denmark** · Jan 10th 2017

Hi now i have try all this things but still not working i send a log
2017/01/10 06:09:51 1E0A27D3 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 098C PROVID 000000 ECMPID 1AEE ANY CHID PMTPID 0062 VPID 02FF
2017/01/10 06:09:51 1E0A27D3 c (ecm) linuxsatsupport (098C@000000/07D3/EF76/9D:3A2BC7F001AA5E2166C113F6A6A3C2EA): rejected group (1 ms) (no matching reader)
2017/01/10 06:09:52 1E0A27D3 c (-) -- Skipped 1 duplicated log lines --
2017/01/10 06:09:52 1E0A27D3 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 2 enabled and 5 disabled ecmpids!
2017/01/10 06:09:52 1E0A27D3 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 09C4 PROVID 000000 ECMPID 1BEE ANY CHID PMTPID 0062 VPID 02FF
2017/01/10 06:09:52 1E0A27D3 c (ecm) linuxsatsupport (09C4@000000/07D3/EF76/B3:D79C49005810B7B748A6C6325E0CACF8): rejected group (1 ms) (no matching reader)
2017/01/10 06:09:52 1E0A27D3 c (-) -- Skipped 1 duplicated log lines --
2017/01/10 06:09:52 1E0A27D3 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 098C PROVID 000000 ECMPID 1AEE ANY CHID PMTPID 0062 VPID 02FF
2017/01/10 06:09:53 1E0A27D3 c (ecm) linuxsatsupport (098C@000000/07D3/EF76/9D:3A2BC7F001AA5E2166C113F6A6A3C2EA): rejected group (0 ms) (no matching reader)
2017/01/10 06:09:53 1E0A27D3 c (-) -- Skipped 1 duplicated log lines --
2017/01/10 06:09:53 1E0A27D3 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 2 enabled and 5 disabled ecmpids!
2017/01/10 06:09:53 1E0A27D3 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 09C4 PROVID 000000 ECMPID 1BEE ANY CHID PMTPID 0062 VPID 02FF

**hacked** · Jan 10th 2017

[MENTION=205453]icecool_denmark[/MENTION]
Is it smargo V1 or V2 ?

**master G** · Jan 10th 2017

Try with these configs:

###oscam.conf###

Code

[global]
nice = -1
logfile = /var/log/oscam.log
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 2
saveinithistory = 1
keepalive = 1




[dvbapi]
enabled = 1
user = linuxsatsupport
boxtype = dreambox
au = 1




[cccam]
port = 12000
reshare = 1




[newcamd]
key = 0102030405060708091011121314
port = 34001@093E:000000;34002@0b00:000000




[webif]
httpport = 8888
httpuser =
httppwd =
httprefresh = 15
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255




[monitor]
appendchaninfo = 1

Display More

###oscam.server###

Code

[reader]
label = canal-digital
protocol = internal
device = /dev/sci0
caid = 0b00
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1




[reader]
label = viasat
protocol = internal
device = /dev/sci1
boxid = *********************
caid = 093E
detect = cd
mhz = 450
cardmhz = 2700
group = 2
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-g = 1




[reader]
label = hd01
protocol = smargo
device = /dev/ttyUSB0
caid = 1830
boxkey = xxxxxxxxxxxxx
rsakey = ***************
ecmwhitelist = 1830:92
detect = cd
ident = 1830:000000,003411,008011
group = 3

Display More

###oscam.user###

Code

[account]
user = linuxsatsupport
keepalive = 1
au = 1
group = 1,2,3

**master G** · Jan 10th 2017

Quote from robertjust

device = 005:002

Thats the correct way for a linux pc server, for an enigma2 receiver use /dev/ttyUSB, then 0,1,2 depending on which port is used.

jakas · Feb 11th 2017

device = 005:002 WHAT DOES THIS MEAN ?

**yogipiti** · Feb 11th 2017

Hi,

I am using 3 smargo readers V1 in an usb hub on my DM900 UHD.
In my opinion, I suggest the following configuration, but first you make sure that you have installed libusb-0.1-4 and libusb-1.0-0 drivers:

[reader]
label = hd01
protocol = smartreader
device = 008:002
...

monkified · Feb 11th 2017

Quote from jakas

device = 005:002 WHAT DOES THIS MEAN ?

It's basically saying which USB port you have your smargo plugged into, so
In your reader setting for your card in your smargo you would put 005:002 in the device setting.
In oscam go to "readers" "scan USB" to get the correct address for your smargo

jakas · Feb 12th 2017

ok but I think this setting is for pc server not engima box
now where do i put the usb, this is from webif scan of usb
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0002
Bus 003 Device 001: ID 1d6b:0001
Bus 004 Device 001: ID 1d6b:0001

- - - Updated - - -

Now when I attach the smargo it gives me:
Bus 004 Device 002: ID 0403:6001
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0002
Bus 003 Device 001: ID 1d6b:0001
Bus 004 Device 001: ID 1d6b:0001

monkified · Feb 12th 2017

if on your pc use the command "lsusb" to list your devices

jakas · Feb 12th 2017

so I guess it means device = /dev/ttyUSB2

- - - Updated - - -

I am using a vu+uno box

Smargo Card reader READER DEVICE ERROR

master G Feb 5th 2022

Participate now!

Share

Tags