Openatv 6.0 backup

There are 8 replies in this Thread which was already clicked 4,571 times. The last Post () by Akenny01.

  • Edision os mini
    Openatv 6.0 backup image
    Just extract file to usb.
    BACKUP YOUR SERVER CONFIGS FRIST
    To flash image put usb into the box then turn on box then press ok

    Autobouquests 28.2 by Lraizer set to Ireland and set to update weekly.
    If you want to change local area.
    prees green button,then press ok on autobouquets E2.
    then press menu on remote, change local area to where u want, then green button to save.
    then run autobouquest green button.

    Timeshift is set to automatically {needs usb or hard drive}

    It's has MGcamd 1.38 pre-installed.


    N lines should be FTP'ed to /usr/keys/newcamd.list
    C lines should be FTP'ed to /usr/keys/cccamd.list


    I've added skyNEW Skin by Chabs along with Picons from oktus.
    thanks to all who made this possible.


    tsmedia 11.5,albatros 6.1, are installed and seem to be working fine.

    ftp username and password
    root/dreambox


    11a9409.jpg
    eb537f25d31f32a15f.jpg
    d6e496f3eac8a18be4348ee2.jpg
    e29f05ab3c304d45dc926.jpg
    98c323238a3e124.jpg
    2573487175.jpg
    6f50445f57.jpg
    e5ab88.jpg
    931d6b52c954fb50b.jpg
    8b4cca124d58ccd7d1.jpg
    065b169807e84a.jpg
    11f2a3089e67e.jpg
    9bc3d.jpg
    d5399e58d3f399e84fd0b79e0.jpg

  • cannot get this to install.
    the image installs to approx 50% then just goes to a blue screen and sits there forever with 'boot' showing on the mini display.
    tried 3 different usb sticks [first one i used is the 4gb stick i use for epg]
    tried rear and front usb ports.
    thought it may be a problem with the download so downloaded twice but same result.
    anyone get this to work ?

  • Ive not been able to get any atv backup from here to flash, they all fail and you get stuck at boot, they all start fine.


    the same usb with either fresh (non backup image) atv or vix os flash perfectly??

  • You could try flashing from the base image
    Install a base image (preferably the one the backup was created from).
    Ftp the backup to your hdd or a mounted usb stick attached to the receiver (you may need to extract it out first, place in media/hdd/imagebackup or something similar)
    Then (openatv) look in settings- software management and online/local flash i think.
    Browse to your backup location (using coloured buttons) and it may give you the option to flash from there.
    Been a while since i've used atv though so the procedure may have changed.

  • Was made on os single tuner.
    BACKUP LINE DETAILS FIRST
    It will work with the twin Sat model too, all you need to do is change tuner B


    After installation remember to go into Menu > Setup > Service Searching > tuner configuration tuner b.


    configuration mode = simple
    mode = single
    satellite = 28.2 astra 2e/2f/2g
    send diseqc = no
    when you have it like that, press the green button to save,then yes, then exit until back to tv.


    Autobouquests 28.2 by Lraizer set to Ireland and set to update weekly.


    If you want to change local area.
    prees green button,then press ok on autobouquets E2.
    then press menu on remote, change local area to where u want, then green button to save.
    then run autobouquest green button.


    It's has MGcamd 1.38 pre-installed.


    N lines should be FTP'ed to /usr/keys/newcamd.list
    C lines should be FTP'ed to /usr/keys/cccamd.list


    I've added chabs NewSky skin with latest mods along with oktus mirror picons.
    thanks to all who made this possible.
    info bar fixed


    tsmedia 11.6,albatros 6.4,iptvplayer, are installed and seem to be working fine.



    To install, {IF NOT ON OPENATV 5.3}

    Simply format a USB stick using FAT32
    Extract the OSMINI folder to the root of your USB drive
    Power OFF your Edision and insert the USB drive.
    Power ON your Edision and you should be prompted to PRESS OK on the remote.


    To install, {IF ON OPENATV 5.3}

    Ftp the backup to your hdd or a mounted usb stick attached to the receiver
    place in media/hdd/
    Then press blue buttonthen go to flash online/local
    then press LOCAL {BLUE BUTTON}
    then press YELLOW BUTTON {DEVICES} THEN YOUR HDD
    then go to OSMINI.then you see 2 files.go down to any one.
    THEN PRESS GREEN BUTTON TO FLASH.
    let it work away it will reboot its self.
    FTP root and dreambox
    e891251.jpg
    422c8c17102ee9cccd7b03eef.jpg

  • Hey. Thanks for the image, I installed this today but can't get my line working at all. I've installed it in the usual place, restarted mgcamd, no luck. Any ideas?

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!