oscam set up from scratch

witch box u have , and image ??

[MENTION=3]master G[/MENTION]
can use oscam on a C-line?
if so how can I configure it then?
Thank you

thank you for the quick response, will try it out straight away..

Hi Master G,
I have got an n line and I would like to use it to learn and share with my friends.
I used the configuration you attached here (only port, user, pass changed) but unfortunately it is not working.
I have installed oscam 11272 with Ubuntu-1604-xenial-64-minimal in a vps.
The reader (in the webif) status is connected.
Then I created n line and put into my zgemma box, restarted the mgcamd and the stb.
But the user status in oscam webif (in vps) shows offline, no image in the tv screen.
If possible, could anyone please help me out.

Following are my config files.
Oscam.config : same as you attached.
oscam.server

[reader]
label = reader_1
enable = 0
protocol = newcamd
device = 192.168.0.2,2345
key = 0102030405060708091011121314
user = user2
password = password2
fallback = 1
group = 1

[reader]
label = reader_bs1
description = coming from bs
protocol = newcamd
device = ******.com,****
key = 0102030405060708091011121314
user = *****
password = ******
reconnecttimeout = 5
connectoninit = 1
caid = 0963
ident = 0963:000000
group = 2

oscam.user (total 6/7 users like below)
[account]
disabled = 1
user = cccam
pwd = cccam
au = 1
group = 1,2

[account]
user = linuxsatsupport
group = 2

[account]
user = mkhzsat5
pwd = ******
description = To create an N line for mk, sat.
au = 1
group = 2

Live log is given below –
• 2017/02/16 04:29:57 00000000 s (main) System name = Linux
• 2017/02/16 04:29:57 00000000 s (main) Host name = Ubuntu-1604-xenial-64-minimal
• 2017/02/16 04:29:57 00000000 s (main) Release = 4.4.0-47-generic
• 2017/02/16 04:29:57 00000000 s (main) Version = #68-Ubuntu SMP Wed Oct 26 19:39:52 UTC 2016
• 2017/02/16 04:29:57 00000000 s (main) Machine = x86_64
• 2017/02/16 04:29:57 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 15765
• 2017/02/16 04:29:57 00000000 s (config) services reloaded: 0 services freed, 25 services loaded, rejected 0
• 2017/02/16 04:29:57 00000000 s (config) userdb reloaded: 7 accounts loaded, 0 expired, 1 disabled
• 2017/02/16 04:29:57 00000000 s (main) signal handling initialized
• 2017/02/16 04:29:57 00000000 s (config) 887 service-id's loaded in 1 ms
• 2017/02/16 04:29:57 00000000 s (net) newcamd: initialized (fd=4, port=11001, prio=1)
• 2017/02/16 04:29:57 00000000 s (net) -> CAID: 0963 PROVID: 000000
• 2017/02/16 04:29:57 00000000 s (net) cccam: initialized (fd=5, port=13000, prio=1)
• 2017/02/16 04:29:57 00000000 s (reader) reader_bs1 [newcamd] creating thread for device *****.com
• 2017/02/16 04:29:57 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2017/02/16 04:29:57 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
• 2017/02/16 04:29:57 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
• 2017/02/16 04:29:57 00000000 s (anticasc) anti cascading disabled
• 2017/02/16 04:29:57 63DCE044 p (newcamd) proxy *****.com: ***** newcamd525 (fd=0)
• 2017/02/16 04:29:57 4DB8EECF c (client) plain dvbapi-client granted (linuxsatsupport, au=off)
• 2017/02/16 04:29:57 4DB8EECF c (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
• 2017/02/16 04:29:57 4DB8EECF c (dvbapi) ERROR: Could not detect DVBAPI version.
• 2017/02/16 04:29:57 5D72DB85 h (webif) webif: decompressed 174882 bytes back into 427192 bytes
• 2017/02/16 04:29:57 5D72DB85 h (webif) HTTP Server running. ip=0.0.0.0 port=*****
• 2017/02/16 04:30:02 63DCE044 p (reader) *****.com: resolved ip=xxxxxxxxxxxxx
• 2017/02/16 04:30:02 63DCE044 p (reader) reader_bs1 [newcamd] connecting to *****:*****
• 2017/02/16 04:30:02 63DCE044 p (newcamd) Newcamd Server: *****: ***** - UserID: 89
• 2017/02/16 04:30:02 63DCE044 p (newcamd) CAID: 0963 - UA: 0000000000000000 - Provider # 1
• 2017/02/16 04:30:02 63DCE044 p (newcamd) Provider ID: 000000 - SA: 00000000
• 2017/02/16 04:30:02 63DCE044 p (reader) reader_bs1 [newcamd] proxy initialized, server *****: *****

I tried to reply before 1 minute but it did not go through. so i am sending again.

Hi Master G,
Thank you for your quick response.
I created a user mkhzsat6 (copied from mkhzsat5 and changed the number).
Then I added the following line to the zgemma (user > keys).
------
CWS = ********.ch ***** mkhzsat6 ****** 01 02 03 04 05 06 07 08 09 10 11 12 13 14
-------------
Also at the top > CWS_KEEPALIVE = 300
Then I restarted > mgcamd 1.38, stb, network (from the menu > setup > …….)
I restarted the oscam (in vps) also.
But nothing happened, same as before.
Anyway, it started but took 20 minutes (!!!) to start the tv channels.
Definitely 20 minutes as a starting time is NOT acceptable in any way.
Must be something wrong in my configs.

Could you please give me an idea of what I should do.

Last few lines of the live log is

• 2017/02/16 13:36:47 63DCE044 p (reader) reader_bs1 [newcamd] proxy initialized, server *****.com:*****
• 2017/02/16 13:51:52 6A70DDDB c (newcamd) client connected to ***** port
• 2017/02/16 13:51:52 6A70DDDB c (client) encrypted newcamd:*****-client xxxxxxxxxxxx granted (mkhzsat6, au=auto (2 reader))
• 2017/02/16 13:51:52 6A70DDDB c (newcamd) user mkhzsat6 authenticated successfully (mgcamd)
• 2017/02/16 13:51:52 6A70DDDB c (newcamd) AU enabled for user mkhzsat6 on reader reader_bs1
• 2017/02/16 13:51:52 6A70DDDB c (newcamd) SID list will not be send to mgcamd client.

Hi Master G,
Sorry for not telling you about the mg_cfg early.
And thank you for sending me the config file.
I uploaded all the files (including ccamd, though I am not using c line) in the user > keys.
In the newcamd.list, I put my n line (created from my oscam in vps) at the end and commented out the n line you wrote there.
The newcamd.list looks like this –

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000

# CWS = 127.0.0.1 10001 linuxsat1 support1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan

CWS = ****.ch **** mkhzsat6 **** 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan

And the first few lines (in comments) on top.

Then I restarted the mgcamd and stb.
This time it did not start at all ( I waited for 1 hour this time).
Last few lines of the log –
• 2017/02/16 15:07:25 6A70DDDB c (ecm) mkhzsat6 (0963@000000/FFFF/C791/71:CA797A4D1DEAE84E6DEFF7DBD9C7CFBB): found (123 ms) by reader_bs1 - Nick Junior 2 UK
• 2017/02/16 15:07:33 6A70DDDB c (ecm) mkhzsat6 (0963@000000/FFFF/C791/71:E82B58307EA0BE16497402A9C8CF1B51): found (126 ms) by reader_bs1 - Nick Junior 2 UK
• 2017/02/16 15:07:40 6A70DDDB c (client) mkhzsat6 disconnected from 82.38.121.***

Can you help me out please.

Thanks.

Hi Master G,
you have attached an ipk file in the above message.
is it for me or for southsimon ?
if not for me - could you please let me know what i should do now.
Thanks.
Murshed

Help required, Using a VuUno4k installed Oscam and added files oscam.server and oscam.conf, Followed the above but nothing seems to clear..?? nline

Hi do u want help via team vieuwer ?

- - - Updated - - -

for ALIB FIXED WAS GROUP DIFFERENTS IN READER AND USER .

Thankyou for your help and support.. GREAT FORUM