Hi all,
I have spent too much time with my system making it work. I finaly though i got the whole thing running.
Since my Smargo was able to decode signals from TvHeadend.
The problem.
After about 1 day of working with decoding signals the reader stops working and all i see is:
2017/02/19 12:15:26 07C21C8E r (reader) CanalDigital [smargo] Buffers readed 0 bytes total time_us 75142
2017/02/19 12:15:26 07C21C8E r (reader) CanalDigital [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=369)
2017/02/19 12:15:26 07C21C8E r (reader) CanalDigital [smargo] card detected
2017/02/19 12:15:34 07C21C8E r (reader) CanalDigital [smargo] Error activating card.
2017/02/19 12:15:52 07C21C8E r (-) -- Skipped 2 duplicated log lines
2017/02/19 12:15:52 07C21C8E r (reader) CanalDigital [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2017/02/19 12:15:52 07C21C8E r (reader) CanalDigital [smargo] card initializing error
I decided to swap to a different Smargo reader (i bought two). Then it started working again like by magic.
Then after 1 more day this smargo reader stopped working aswell.
Its going to be expencive if i have to keep a stock of 30 smargo readers for a month :).
So does anyone have a suggestion why my smargo reader seems to stop working?
Cheers
- - - Updated - - -
Ok think i found the error.
Apparently i had two instances of OsCam running one old version and a new one.
I killed the old process then i was able to contact the reader propperly again.
I also found that the docoder card i have is not working anymore sooms there is an issue with EMMs and the updates.
In TVHeadend i have tuners running SAT>IP and CA module connected to OSCAM. I swapped to a new decoder card so its working for now.
Im just affraid i will not get updates. I use NEWCAMD protocall.
Also updatecard = true
and one MUX = true.
anything im missing ?