need help with configs please

**toonshare** · Mar 13th 2012

ive found the config i need i think for bulsatcom n*** card and i have *** card configs woring already
i but i have 3 omnikey readers and a smargo for n*** card plugged in my server smargo is on 004:004

i put these configs in my server like this and nothing works at all what am i doing wrong please help had to delete them before as cccam wouldnt work

Code

SERVER LISTEN PORT : 
WEBINFO USERNAME : 
WEBINFO PASSWORD : 
TELNETINFO USERNAME : 
TELNETINFO PASSWORD : 
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME : 3
OSD USERNAME : 
OSD PASSWORD : 
OSD PORT : 80
SHOW TIMING : yes
#MINI OSD : yes
DEBUG : yes
NEWCAMD CONF : yes
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
#SOFTKEY FILE : /var/keys/SoftCam.Key
#AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
MINIMUM CLIENT VERSION : 1.7.0
MINIMUM DOWNHOPS: 1
N: 127.0.0.1 10000 ###### ###### 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

Display More

Code

[global]
logfile                       = /dev/null
cachedelay                    = 120
nice                          = -1
preferlocalcards              = 1
saveinithistory               = 1




[monitor]
hideclient_to                 = 15
appendchaninfo                = 0




[newcamd]
port                          = 10000@0963:000000
key                           = 0102030405060708091011121314




[webif]
httpport                      = 8888
httpuser                      = 
httppwd                       = 
httprefresh                   = 5
httpallowed                   = 192.168.0.0-255.255.255.255







[global]
nice = -1
WaitForCards = 1
saveinithistory = 1
cachedelay = 120




[webif]
httpport = 8888
httpuser = 
httppwd = 
httprefresh = 0
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255




[newcamd]
key = 0102030405060708091011121314
port = 10000@0604:000000,000001,000002,000003
keepalive = 1

Display More

Code

[reader]
label                         = 
protocol                      = pcsc
device                        = 0
caid                          = 0963
detect                        = cd
mhz                           = 357
cardmhz                       = 357
group                         = 1
emmcache                      = 1,3,2
blockemm-unknown              = 1
blockemm-s                    = 1
blockemm-g                    = 1







[reader]
label = bulsat-i*****2
enable = 1
protocol = internal
device = /dev/sci0
detect = cd
force_i***** = 1
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,255
lb_weight = 100
ident = 0604:000000
caid = 0604

Display More

Code

[account]
user = 
pwd = 
monlevel = 0
uniq = 0
group = 1
au = 
caid = 0963







[account]
user = 
pwd = 
disabled = 0
group = 1
caid = 0604
ident = 0604:000000,000001,000002,000003
au = bulsat-i*****2
monlevel = 4

Display More

this is the way i put them in my server did i doit right smargo couldnt be found either lol

**toonshare** · Mar 14th 2012

is there anyone that can help me please is it just the groups and cardreader issue i have here please

**master G** · Mar 14th 2012

Your configs should look like this, you will have to edit the device in oscam.server depending which port the omnikeys are using.

Code

[COLOR='#FF0000']####oscam.conf####[/COLOR]




[global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1




[webif]
httpport = 8888
httpuser = 
httppwd = 
httprefresh = 5
httphideidleclients = 0
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255




[newcamd]
key = 0102030405060708091011121314
port = 34000@0963:000000;34001@0604:000000,000001,000002,000003




[COLOR='#FF0000']####oscam.server####[/COLOR]




[reader]
label = ***UK
protocol = pcsc
device   = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963 




[reader]
label = BULSAT
protocol = pcsc
device = 1
emmcache = 1,3,2
group = 2
caid = 0604
ident = 0604:000000,000001,000002,000003
[COLOR='#FF0000']
####oscam.user####[/COLOR]




[account]
user = linuxsat
pwd = support
monlevel = 0
uniq = 0
group = 1
au = ***UK
caid = 0963




[account]
user = linuxsat1
pwd = support1
monlevel = 0
uniq = 0
group = 2
au = BULSAT
caid = 0604
ident = 0604:000000,000001,000002,000003

Display More

Add these n lines to CCcam.cfg;

Code

N: 127.0.0.1 34000 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 127.0.0.1 34001 linuxsat1 support1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

**toonshare** · Mar 14th 2012

Quote from master G

Your configs should look like this, you will have to edit the device in oscam.server depending which port the omnikeys are using.

Code

[COLOR='#FF0000']####oscam.conf####[/COLOR]




[global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1




[webif]
httpport = 8888
httpuser = 
httppwd = 
httprefresh = 5
httphideidleclients = 0
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255




[newcamd]
key = 0102030405060708091011121314
port = 34000@0963:000000;34001@0604:000000,000001,000002,000003




[COLOR='#FF0000']####oscam.server####[/COLOR]




[reader]
label = ***UK
protocol = pcsc
device   = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963 




[reader]
label = BULSAT
protocol = pcsc
device = 1
emmcache = 1,3,2
group = 2
caid = 0604
ident = 0604:000000,000001,000002,000003
[COLOR='#FF0000']
####oscam.user####[/COLOR]




[account]
user = linuxsat
pwd = support
monlevel = 0
uniq = 0
group = 1
au = ***UK
caid = 0963




[account]
user = linuxsat1
pwd = support1
monlevel = 0
uniq = 0
group = 2
au = BULSAT
caid = 0604
ident = 0604:000000,000001,000002,000003

Display More

Add these n lines to CCcam.cfg;

Code

N: 127.0.0.1 34000 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 127.0.0.1 34001 linuxsat1 support1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

master g my device for bulsat is a smargo set at 600 mhz mate and its in my system at 004 004 mate what do i put instead of omni key as you have done please

**master G** · Mar 14th 2012

Code

####oscam.server####




[reader]
label = ***UK
protocol = pcsc
device   = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963 




[reader]
label = BULSAT
[COLOR='#FF0000']protocol = smartreader
device = 004:004[/COLOR]
emmcache = 1,3,2
group = 2
caid = 0604
ident = 0604:000000,000001,000002,000003

Display More

**toonshare** · Mar 14th 2012

will it run at 600 mhz 600 mhz mate or do i need to imput that as well sorry to be a pain mate

**master G** · Mar 14th 2012

No need to set mhz rate in oscam, this parameter is for receivers only, the clock frequency is set within the smargo when you set it up with the smargo windows utility.

**toonshare** · Mar 14th 2012

Quote from master G

No need to set mhz rate in oscam, this parameter is for receivers only, the clock frequency is set within the smargo when you set it up with the smargo windows utility.

so could i just use the omni key reader mate and it do it for me mate as ive got five spare ones

**master G** · Mar 14th 2012

All i can say is try it out, i dont use omnikey, so have no idea how compatable they are with certain cards.

**toonshare** · Mar 14th 2012

well ive tried all things and it reads card but nee entilements what configs could i use in my vu duo to try update card mate

**master G** · Mar 14th 2012

Without seeing what errors there are in oscam webinfo or log there`s no way of us solving this.

This config will use the top slot of receiver;

Code

protocol = internal
device = /dev/sci0

**toonshare** · Mar 14th 2012

do you want to teamview it mate and get it working for me

it is one of those bluedragon cards but does have n--- sports on it

Code

r ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 34 2E 31 9D
2012/03/14 20:23:48 A15F3A0 r Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
2012/03/14 20:23:49 A15F3A0 r detect i***** card
2012/03/14 20:23:49 A15F3A0 r caid: 0604, acs: 5.05, country code: GRC
2012/03/14 20:23:49 A15F3A0 r providers: 2, ascii serial: 4012345678, hex serial: 309131, hex base: 18
2012/03/14 20:23:54 A15F3A0 r card system not supported
2012/03/14 20:23:54 A15F3A0 r Normal mode failed, reverting to Deprecated Mode
2012/03/14 20:24:00 A15F3A0 r ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 34 2E 31 9D
2012/03/14 20:24:00 A15F3A0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
2012/03/14 20:24:01 A15F3A0 r detect i***** card
2012/03/14 20:24:01 A15F3A0 r caid: 0604, acs: 5.05, country code: GRC
2012/03/14 20:24:01 A15F3A0 r providers: 2, ascii serial: 4012345678, hex serial: 309131, hex base: 18
2012/03/14 20:24:06 A15F3A0 r card system not supported
2012/03/14 20:24:06 A15F3A0 r card initializing error
2012/03/14 20:24:07 0 s init for all local cards done
2012/03/14 20:24:07 0 s anti cascading disabled
2012/03/14 20:24:07 A1635B0 c client connected to 34000 port
2012/03/14 20:24:07 A1635B0 c anonymous disconnected from 127.0.0.1
2012/03/14 20:24:07 A1635B0 c thread B638EB70 ended!

Display More

**master G** · Mar 15th 2012

Quote

it is one of those bluedragon cards but does have n--- sports on it

How do you know it has n0va sports on it ?

Have you programmed this card yourself ? If not, then nothing will clear.

Not all packages open on Blue Dragon at the same time, you need to programme it to open one package, even then there is no gaurantee if or how long it will work.

We dont support Blue Dragon cards here so cant help with programming it sorry.

Your first post said you found the configs for bulsat, i done some further digging and noticed you were also using the wrong caid and identity.

Code

[COLOR='#FF0000']BULSATCOM[/COLOR]
caid = 0604
ident = 0604:010CB1

[COLOR='#FF0000']N0va	GREECE[/COLOR]
caid = 0604
ident =  0604:14583C

need help with configs please

OSCam Support Forum

Participate now!

Share

Tags