Dear Mr,
Would you compile openATV driver PVu DES for Axas/Optibox E3HD ?
![](https://www.linuxsat-support.com/cms/images/avatars/14/2046-14fe930fd5d42bacc6aee5cf25a1a02139ddefbb.jpg)
Joeuser's Taapat based image with new hardware DES drivers. (powervu...)
-
- Spark 7111 Backup
- joeuser
- Thread is marked as Resolved.
-
-
HDMU_16560_E2_spark works for powervu -
HDMU_16560_E2_spark works for powervuThanks for info/testing. I will upload this new version in the 7111 section.
-
HDMU_16560_E2_spark works for powervuwould you like to send me the back up?
-
works great whit Amiko Alien mini but
1) After doing Software Update via regular menu the box won't boot anymore --tested many times so i can't keep my stb updated
2) On the fresh install need to reup feeds for plugins on the tuxbox/opkg because they are not included
3) nice works :-)
-
Quote
After doing Software Update via regular menu the box won't boot anymore --tested many times so i can't keep my stb updated
Yes, the same thing with Amiko Alien 2 on OpenATV 6.0 image. Box hangs in the middle of Software Update. I had to replace drivers again. Otherwise, everything is more or less fine.:)
-
New drivers.
See here for info and new oscam-emu: Joeuser's Taapat based image with new hardware DES drivers. (powervu...)
-
New drivers.
See here for info and new oscam-emu: Joeuser's Taapat based image with new hardware DES drivers. (powervu...)
So compatible are the drivers nich.
At canal shuttle flies tuner out then must times a manual canal search start then everything ok -
New drivers.
See here for info and new oscam-emu: Joeuser's Taapat based image with new hardware DES drivers. (powervu...)
Hi ,
I tried several times install but both files failed :
1. using VuCC_V08 with error message : opkg_prepare_file_for_install:Refusing to load file kernel-module-stmdvb_2.6.32.71-stm24-0217+20160830-r0.0_spark.ipk as it matches the installed version of kernel-module-stmdvb (2.6.32.71-st m24-0217+20160830-r0.0)
2. using the image install local extension but message : done - installed , upgraded or removed 0 packages (with 0 errors)
Any help appreciated .
-
-
Work now and i can install them , thank you very much . :thumbup:
-
New drivers.
See here for info and new oscam-emu: Joeuser's Taapat based image with new hardware DES drivers. (powervu...)
Hi Joe. Would you also patch the audio driver regarding the audio R/L only (mono). The stereo is fine, but we still can't switch to mono.
-
Quote
Hi Joe. Would you also patch the audio driver regarding the audio R/L only (mono). The stereo is fine, but we still can't switch to mono,
Sorry, I was away for a few weeks and then have been busy catching up on things, so I haven't logged in here in a long time.
I am not sure what the problem is exactly??? Do you have some channel I can test with? I can switch between stereo/left/right but I am not sure it really works.
The audio.elf file included in the image ( /boot/audio.elf) is supposed to have some fixes for ac3. Attached is another audio.elf file you can try (the only other one I have...)
-
Hello to all ..... because i have not understood it is for spark 7111 open pli
-
Hello to all ..... because i have not understood it is for spark 7111 open pli
Yes.
-
Quote
Hi Joe. Would you also patch the audio driver regarding the audio R/L only (mono). The stereo is fine, but we still can't switch to mono,
Sorry, I was away for a few weeks and then have been busy catching up on things, so I haven't logged in here in a long time.
I am not sure what the problem is exactly??? Do you have some channel I can test with? I can switch between stereo/left/right but I am not sure it really works.
The audio.elf file included in the image ( /boot/audio.elf) is supposed to have some fixes for ac3. Attached is another audio.elf file you can try (the only other one I have...)
Problem with the L/R audio just like in Cartoon Network on Asiasat7 105,5E is because the audio language on Left differs from Right. So it's mixing all the time if we choose Stereo mode. I've tried the audio.elf, but still the problem persists.
-
Quote
Hi Joe. Would you also patch the audio driver regarding the audio R/L only (mono). The stereo is fine, but we still can't switch to mono,
Sorry, I was away for a few weeks and then have been busy catching up on things, so I haven't logged in here in a long time.
I am not sure what the problem is exactly??? Do you have some channel I can test with? I can switch between stereo/left/right but I am not sure it really works.
The audio.elf file included in the image ( /boot/audio.elf) is supposed to have some fixes for ac3. Attached is another audio.elf file you can try (the only other one I have...)
Problem with the L/R audio just like in Cartoon Network on Asiasat7 105,5E is because the audio language on Left differs from Right. So it's mixing all the time if we choose Stereo mode. I've tried the audio.elf, but still the problem persists.
Which image are you using?
-
Quote
Hi Joe. Would you also patch the audio driver regarding the audio R/L only (mono). The stereo is fine, but we still can't switch to mono,
Sorry, I was away for a few weeks and then have been busy catching up on things, so I haven't logged in here in a long time.
I am not sure what the problem is exactly??? Do you have some channel I can test with? I can switch between stereo/left/right but I am not sure it really works.
The audio.elf file included in the image ( /boot/audio.elf) is supposed to have some fixes for ac3. Attached is another audio.elf file you can try (the only other one I have...)
Problem with the L/R audio just like in Cartoon Network on Asiasat7 105,5E is because the audio language on Left differs from Right. So it's mixing all the time if we choose Stereo mode. I've tried the audio.elf, but still the problem persists.
Which image are you using?
Last image of the OpenPLi5 by Joe.
-
The link?
-
The link?
on first post of this thread.
Spark STI 7111 Images
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!