Help setting up External Card Reader Pheonix Smart Mouse 3201 5 crystal

Hello friends i have been trying the past few days trying to set up the Pheonix Smart mouse card reader in Oscam, however every attempt i made has not worked.

I just went into oscam and select add card. Only inserted the relevant information . When i do to status card error shows up with no entitlements.

The information i added is as follows :CAID= 5904,

Device =/dev/ttyusb002,

Description = external card reader

can someone please help me

I would 1 like to set up this card reader to reade a verimatrix acesscard

the caid of the acess card is 0x5604

whenever i add it as shown above the 0x disappears leaving 5904

please help , awaiting your reply.....

thanks for the assistance , the problem i realised was that the switch on the reader was in pheonix mode.

Got oscam to see card reader however issues with card , it not detecting , pleases assist , the log is shown below

• 2017/04/02 15:37:26 7AB59C37 h (reader) External_Reader [mouse] Restarting reader
• 2017/04/02 15:37:26 7AB59C37 h (reader) External_Reader [mouse] creating thread for device dev/ttyUSB0
• 2017/04/02 15:37:26 6E03A2FF r (reader) External_Reader [mouse] Buffers readed 0 bytes total time_us 76768
• 2017/04/02 15:37:26 6E03A2FF r (reader) External_Reader [mouse] Buffers readed 0 bytes total time_us 75294
• 2017/04/02 15:37:26 6E03A2FF r (reader) External_Reader [mouse] Reader initialized (device=dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
• 2017/04/02 15:44:39 6E03A2FF r (reader) External_Reader [mouse] card detected
• 2017/04/02 15:44:39 6E03A2FF r (reader) External_Reader [mouse] Buffers readed 0 bytes total time_us 75289
• 2017/04/02 15:44:40 6E03A2FF r (reader) External_Reader [mouse] ATR: 37 2B 60 6B 3F
• 2017/04/02 15:44:40 6E03A2FF r (reader) External_Reader [mouse] ERROR: Could not read reader->convention
• 2017/04/02 15:44:40 6E03A2FF r (reader) External_Reader [mouse] Error activating card.
• 2017/04/02 15:44:41 6E03A2FF r (reader) External_Reader [mouse] Buffers readed 0 bytes total time_us 75284
• 2017/04/02 15:44:42 6E03A2FF r (reader) External_Reader [mouse] ATR: 37 2B 60 6B 3F
• 2017/04/02 15:44:42 6E03A2FF r (reader) External_Reader [mouse] ERROR: Could not read reader->convention
• 2017/04/02 15:44:42 6E03A2FF r (reader) External_Reader [mouse] Error activating card.
• 2017/04/02 15:44:43 6E03A2FF r (reader) External_Reader [mouse] Buffers readed 0 bytes total time_us 75283
• 2017/04/02 15:44:44 6E03A2FF r (reader) External_Reader [mouse] ATR: 37 2B 60 6B 3F
• 2017/04/02 15:44:44 6E03A2FF r (reader) External_Reader [mouse] ERROR: Could not read reader->convention
• 2017/04/02 15:44:44 6E03A2FF r (reader) External_Reader [mouse] Error activating card.
• 2017/04/02 15:44:44 6E03A2FF r (reader) External_Reader [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2017/04/02 15:44:44 6E03A2FF r (reader) External_Reader [mouse] card initializing error

doe it mean that the card reader does not support verimatrix card

please help , trying almost a year to get this to work

CAID=0x5604

VCAS DVB

Verimatrix Inc

this is the card trying to read, please help masterG

Master G please help changed clock to 357mhz , the log is shown below ,

• 2017/04/02 16:48:17 7AB59C37 h (reader) External_Reader [mouse] creating thread for device dev/ttyUSB0
• 2017/04/02 16:48:17 2567A19D r (reader) External_Reader [mouse] Flush readed byte Nr 1 value 36 time_us 2019
• 2017/04/02 16:48:17 2567A19D r (reader) External_Reader [mouse] Flush readed byte Nr 2 value 00 time_us 527
• 2017/04/02 16:48:17 2567A19D r (reader) External_Reader [mouse] Flush readed byte Nr 3 value 81 time_us 627
• 2017/04/02 16:48:17 2567A19D r (reader) External_Reader [mouse] Flush readed byte Nr 4 value 31 time_us 552
• 2017/04/02 16:48:17 2567A19D r (reader) External_Reader [mouse] Flush readed byte Nr 5 value fe time_us 1895
• 2017/04/02 16:48:17 2567A19D r (reader) External_Reader [mouse] Flush readed byte Nr 6 value 5d time_us 550
• 2017/04/02 16:48:17 2567A19D r (reader) External_Reader [mouse] Flush readed byte Nr 7 value 95 time_us 610
• 2017/04/02 16:48:17 2567A19D r (reader) External_Reader [mouse] Buffers readed 7 bytes total time_us 84510
• 2017/04/02 16:48:17 2567A19D r (reader) External_Reader [mouse] Buffers readed 0 bytes total time_us 75284
• 2017/04/02 16:48:17 2567A19D r (reader) External_Reader [mouse] Reader initialized (device=dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
• 2017/04/02 16:48:18 2567A19D r (reader) External_Reader [mouse] card detected
• 2017/04/02 16:48:18 2567A19D r (reader) External_Reader [mouse] Buffers readed 0 bytes total time_us 75299
• 2017/04/02 16:48:19 2567A19D r (reader) External_Reader [mouse] ATR: 3B B0 36 00 81 31 FE 5D 95
• 2017/04/02 16:48:19 2567A19D r (reader) External_Reader [mouse] Buffers readed 0 bytes total time_us 75280
• 2017/04/02 16:48:20 2567A19D r (reader) External_Reader [mouse] Warning: D=0 is invalid, forcing D=1
• 2017/04/02 16:48:20 2567A19D r (reader) External_Reader [mouse] Init card protocol T1, FI=3, F=744, D=1, N=0
• 2017/04/02 16:48:20 2567A19D r (reader) External_Reader [mouse] Setting baudrate to 4800 bps
• 2017/04/02 16:48:20 2567A19D r (reader) External_Reader [mouse] Calculated work ETU is 208.40 us reader mhz = 357
• 2017/04/02 16:48:20 2567A19D r (reader) External_Reader [mouse] Buffers readed 0 bytes total time_us 75255
• 2017/04/02 16:48:20 2567A19D r (reader) External_Reader [mouse] ATR Fsmax is 8 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
• 2017/04/02 16:48:23 2567A19D r (reader) External_Reader [mouse] Warning: Card returned error on setting ifsd value to 251
• 2017/04/02 16:48:24 2567A19D r (reader) External_Reader [mouse] card system not supported
• 2017/04/02 16:48:24 2567A19D r (reader) External_Reader [mouse] Normal mode failed, reverting to Deprecated Mode
• 2017/04/02 16:48:24 2567A19D r (reader) External_Reader [mouse] Buffers readed 0 bytes total time_us 75287
• 2017/04/02 16:48:25 2567A19D r (reader) External_Reader [mouse] ATR: 3B B0 36 00 81 31 FE 5D 95
• 2017/04/02 16:48:25 2567A19D r (reader) External_Reader [mouse] Warning: D=0 is invalid, forcing D=1
• 2017/04/02 16:48:25 2567A19D r (reader) External_Reader [mouse] Init card protocol T1, FI=3, F=744, D=1, N=0
• 2017/04/02 16:48:25 2567A19D r (reader) External_Reader [mouse] Calculated work ETU is 104.20 us reader mhz = 357
• 2017/04/02 16:48:25 2567A19D r (reader) External_Reader [mouse] Buffers readed 0 bytes total time_us 75248
• 2017/04/02 16:48:25 2567A19D r (reader) External_Reader [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
• 2017/04/02 16:48:29 2567A19D r (reader) External_Reader [mouse] Warning: Card returned error on setting ifsd value to 251
• 2017/04/02 16:48:30 2567A19D r (reader) External_Reader [mouse] card system not supported
• 2017/04/02 16:48:30 2567A19D r (reader) External_Reader [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2017/04/02 16:48:30 2567A19D r (reader) External_Reader [mouse] card initializing error

thanks man , i heard that some people try diffrent configs if they cards are not supported in oscam and i some cases they get through.

Anyone out there wishing to assist please reply , as i said i am trying over one year now and no success, thank everyone who have assisted in anywhere , and if anyone can help please do thanks ....

3B B0 36 00 81 31 FE 5D 95
	Betacrypt 2 (Comvenient GmbH) Conditional Access Smart Card (Pay TV)
	www.comvenient.com

hey guys just google the ATR and it just found ot this , seems its a Betacrypt 2 technology or something

can anyone give futher assistance thanks

hello guys please help me setting up betacrypt 2 with oscam