Running OpenAtv 6.0 on a Evo Enfinity Mini. Which version of oscam should I use?
Oscam OpenATV 6.0 Evo Enfinity Mini
-
- General OSCam
- dunne109
- Thread is marked as Resolved.
-
-
Give the attached version a try.
-
Thanks Master G. But still no joy unfortunately.
I have replaced with oscam.server file with the following and my server details. Any suggestions?
When I go to the softcam panel, it just says no ECM info.
reader]
label = sky
description = Newcamd
protocol = newcamd
device = server.com,portnumber
key = 0102030405060708091011121314
user = xxxx
password = xxxx
caid = 0963
ident = 0000:000000
group = 1
audisabled = 1 -
The [reader] is missing a bracket [ is that just a typo ?
Set the reader like this:
[reader]
label = sky
protocol = newcamd
device = server.com,portnumber
key = 0102030405060708091011121314
user = xxxx
password = xxxx
group = 1If that doesn`t work go to the oscam web-interface and have a look at whats wrong.
In a browser type http://ip.address.of.enfinity:8888
-
That was just a typo.
Sure I will check that out and report back. Thanks for your help.
-
Hi, I have entered the oscam.server files exactly as above via the oscam interface http://ip.address.of.enfinity:8888
The log is showing a number of errors like
2017/07/10 11:47:00 1D7AE3F1 c (-) -- Skipped 4 duplicated log lines --
2017/07/10 11:47:00 1D7AE3F1 c (dvbapi) Demuxer 0 stop descrambling program number CD3F (At The Races)
2017/07/10 11:47:00 1D7AE3F1 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0963 ECM_PID: 0504 PROVID: 000000
2017/07/10 11:47:00 1D7AE3F1 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0961 ECM_PID: 0504 PROVID: 000000
2017/07/10 11:47:00 1D7AE3F1 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0960 ECM_PID: 0504 PROVID: 000000
2017/07/10 11:47:00 1D7AE3F1 c (dvbapi) Demuxer 0 found 3 ECMpids and 6 STREAMpids in caPMT
2017/07/10 11:47:00 1D7AE3F1 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2017/07/10 11:47:00 1D7AE3F1 c (dvbapi) Demuxer 0 found 3 ECMpids and 6 STREAMpids in PMT
2017/07/10 11:47:04 1D7AE3F1 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2017/07/10 11:47:07 1D7AE3F1 c (config) 6 service-id's loaded in 0 ms
2017/07/10 11:47:08 1D7AE3F1 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2017/07/10 11:48:03 1D7AE3F1 c (-) -- Skipped 10 duplicated log lines --AND
2017/07/10 11:33:58 68313D89 p (reader) sky [newcamd] connecting to http://server:port 2017/07/10 11:33:58 68313D89 p (newcamd) server does not return 14 bytes 2017/07/10 11:33:58 68313D89 p (reader) sky [newcamd] disconnected: reason connect error 2017/07/10 11:34:01 68313D89 p (reader) sky [newcamd] connecting to http://server:port 2017/07/10 11:34:01 68313D89 p (newcamd) server does not return 14 bytes
I have also tried to test my own line (which is working on my Mutant) however this did not work either. Any further suggestions please?
Cheers
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!