Hi
I have 2 servers & use a Telnet app on my phone to connect to my 1st server using default port 23
I have tried with no success to add the 2nd server using port 24??
Cab anyone help me with this plz
Thanks
inspiral
Hi
I have 2 servers & use a Telnet app on my phone to connect to my 1st server using default port 23
I have tried with no success to add the 2nd server using port 24??
Cab anyone help me with this plz
Thanks
inspiral
Does anyone use a Telnet app on an Iphone then??
Have you changed settings on the server to allow port 24 ?
Is port 24 open in the router ? You checked at canyouseeme.org to see if its open ?
Which kind of server, linux pc or receiver ?
Have you changed settings on the server to allow port 24 ?
Is port 24 open in the router ? You checked at canyouseeme.org to see if its open ?
Which kind of server, linux pc or receiver ?
hi G m8
thats my issue i cannot assign another port eg 24- 25- 26 ?
it doesent matter what port i set in my router Canyouseeme says closed on any port number that i use??
When you configure the router to use say port 24 are you assigning the port to the servers ip address ?
When you configure the router to use say port 24 are you assigning the port to the servers ip address ?
yes m8, just the same as i do for servers etc...
Anyone any ideas?
There should be an option in the router to open up a port range.
For example port 20 - 30, then every port in between will be open.
In your case set the range to start at 23 and end at 24.
Don’t have an account yet? Register yourself now and be a part of our community!