Hi
I have a dreambox 800Hd and i watch Power Vu channel´s without stream relay....
I buy now a Dm900UHD and i read different things about this matter... my question is: with this box can i watch Power Vu channel´s withou stream relay?
Thanks!!
Hi
I have a dreambox 800Hd and i watch Power Vu channel´s without stream relay....
I buy now a Dm900UHD and i read different things about this matter... my question is: with this box can i watch Power Vu channel´s withou stream relay?
Thanks!!
can i watch Power Vu channel´s withou stream relay
Yes you can.
can i watch Power Vu channel´s withou stream relay
Yes you can.
Thanks for your answer...
Should i use a specific OscamEmu version or the last one for arm will work?
can i watch Power Vu channel´s withou stream relay
Yes you can.
I am using NewEnigma image with "softcam-oscam-emu-11289-armhf-NewNigma"
I add the configurations you left me on Oscam files but i can not open Power Vu...
I get this:
2017/10/17 21:29:05 60C33776 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2017/10/17 21:29:05 60C33776 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 177B ANY CHID PMTPID 1393 VPID 0582
Any help please?
This is the latest PowerVU version patched by juli13 its working well.
I am using NewEnigma image with "softcam-oscam-emu-11289-armhf-NewNigma"
Give the attached version a try.
This is the latest PowerVU version patched by juli13 its working well.
I am using NewEnigma image with "softcam-oscam-emu-11289-armhf-NewNigma"
Give the attached version a try.
Thanks for your answers...
It´s not working... i try both files...
If i replace Oscam file in bin oscam did bot start. If i overwrite it starts but Power Vu are off.
A dummy questions: every time i overwrite a new OscamEmu version should WebInfo change? Because i have always the same WebInfo
I try also this image:
DM900 : OpenATV 6.1 Kodi 17.3 & Powervu AutoRoll
And Power Vu are working fine but the "rest" off Oscam functions did not work and the image did nor recognize my Hdd...
I back do dream elite ... What is the OscamEmu version of that image?
every time i overwrite a new OscamEmu version should WebInfo change
Yes, oscam webinterface will show which version is used.
When installing a .deb file you should do it in telnet, if there is a problem it will give you an error, which will help us find a reason why it doesn`t work.
Oscam-emu doesn`t work on all images, some extra libraries might be required.
FTP .deb to /tmp folder then run this command dpkg -i /tmp/*deb
Try attached file for dream-elite.
Display Moreevery time i overwrite a new OscamEmu version should WebInfo change
Yes, oscam webinterface will show which version is used.
When installing a .deb file you should do it in telnet, if there is a problem it will give you an error, which will help us find a reason why it doesn`t work.
Oscam-emu doesn`t work on all images, some extra libraries might be required.
FTP .deb to /tmp folder then run this command dpkg -i /tmp/*deb
Try attached file for dream-elite.
I will try...
I get always same Webinterface... what is strange. I usually install "normal oscam" with dpkg -i /tmp/*deb, and works ok... the problem cames with the substitution of oscam in Bin folder
For the file you left should i install a Oscam first from a feed (Ts pannel, etc) or can i install without install anything first?
Thanks!!
or can i install without install anything first?
Install the file only, no need for anything from TSPanel.
or can i install without install anything first?
Install the file only, no need for anything from TSPanel.
I made the installation without any problem,
But i can´t start the Oscam...
What is the Telnet command to uninstall?
What images works ok with oscamEmu?
I install a clean OpenAtv image and a Oscam Emu working....
But Power Vu are off....
I get this:
This mean´s i have a oscam configuration problem?
Display MoreHi
I have a dreambox 800Hd and i watch Power Vu channel´s without stream relay....
I buy now a Dm900UHD and i read different things about this matter... my question is: with this box can i watch Power Vu channel´s withou stream relay?
Thanks!!
Hi
extended_cw_api = 1
= 1 for OE 2.2/2.5 images
= 2 is for OE 2 images
Display MoreDisplay MoreHi
I have a dreambox 800Hd and i watch Power Vu channel´s without stream relay....
I buy now a Dm900UHD and i read different things about this matter... my question is: with this box can i watch Power Vu channel´s withou stream relay?
Thanks!!
Hiextended_cw_api = 1
= 1 for OE 2.2/2.5 images= 2 is for OE 2 images
Made the change... but no lucky...
This are my settings...
Please any one can take a look?
Probably i am making a basic mistake...
Oscam.conf
[global]
serverip = 192.168.1.155
logfile = stdout
disablelog = 1
fallbacktimeout = 1500
clientmaxidle = 300
failbantime = 60
failbancount = 2
nice = -10
maxlogsize = 1000
waitforcards = 0
readerrestartseconds = 180
lb_mode = 1
lb_save = 100
lb_nbest_readers = 2
lb_savepath = /usr/keys/oscam.stat
resolvegethostbyname = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = linuxsatsupport
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = dreambox
boxtype = dreambox
#[global]
#logfile = stdout
#waitforcards = 0
[cccam]
port = 8989
reshare = 1
ignorereshare = 0
forward_origin_card = 0
version = 2.2.1
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 0
[monitor]
port = 0
nocrypt =
aulow = 30
hideclient_to = 15
monlevel = 2
appendchaninfo = 1
[webif]
httpport = 16002
httptpl = /etc/tuxbox/config/tpl/
httprefresh = 30
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0
[streamrelay]
stream_relay_enabled = 0
OScam server
[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000; 0500:000000,030B00,023800,021110,007400,007800;1801:000000,0 01101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:0 00000
group = 1
emmcache = 2,2,2,0
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000011,000014,0000F E
[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000; 0500:000000,030B00,023800,021110,007400,007800;1801:000000,0 01101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:0 00000
group = 1
emmcache = 2,2,2,0
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000011,000014,0000F E1
Oscam.user
[account]
user = linuxsatsupport
group = 1
au = 1
Thanks...
Problem solved with DreamElite image with enigma2-plugin-softcam-oscam_1.20_Dream-Elite6.0_armhf
It is a pity oscam bug of not working when coming from Power Vu channel´s..
I'm coming back to the stream relay solution...
so are you using the same configs you posted mate?
also do you have any problems when switching between channels for -> PowerVU/local card/Proxy readers ?
so are you using the same configs you posted mate?
also do you have any problems when switching between channels for -> PowerVU/local card/Proxy readers ?
I have different configs... If you need i can post it...
When i came from PowerVu to any other they do not work (i need restar box).
So i am using stream relay and with that have no problem coming from PowerVu channel´s
yes thats exactly the problem i have on my Dm525
can you please post configs mate ;-)
yes thats exactly the problem i have on my Dm525
can you please post configs mate ;-)
You will need 3 things: A OscamEmu that works with your image, the correct Oscam settings and Stream relay
My configurations:
Oscom.conf
[global]
serverip = 192.168.1.155
logfile = stdout
disablelog = 1
fallbacktimeout = 1500
clientmaxidle = 300
failbantime = 60
failbancount = 2
nice = -10
maxlogsize = 1000
waitforcards = 0
readerrestartseconds = 180
lb_mode = 1
lb_save = 100
lb_nbest_readers = 2
lb_savepath = /usr/keys/oscam.stat
resolvegethostbyname = 1
[cccam]
port = 8989
reshare = 1
ignorereshare = 0
forward_origin_card = 0
version = 2.2.1
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 0
[cache]
max_time = 18
cacheexenablestats = 1
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
pmt_mode = 0
delayer = 60
user = DM900
extended_cw_api = 1
boxtype = dreambox
[webif]
httpport = 16002
httptpl = /etc/tuxbox/config/tpl/
httprefresh = 30
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0
Oscam.server
[reader]
label = lowerSlot
enable = 0
protocol = internal
device = /dev/sci0
detect = cd
cardmhz = 2700
group = 1
emmcache = 1,1,31,0
[reader]
label = upperSlot
enable = 0
protocol = internal
device = /dev/sci1
detect = cd
cardmhz = 2700
group = 1
emmcache = 1,1,31,0
[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
Oscam.user
[account]
user = DM900
pwd = 31101967
au = Oscam
group = 1
About stream relay:
(credits for @Ghouri)
Channel Config:
1. Go to the OpenWebif and click on the "Stream" button for the channel you want to add.
2. Download and save the .m3u file.
3. Open the .m3u file with a text edior and get the stream link. It looks like this:
http://stb:8001/1:0:19:0123:3EF:1:C00000:0:0:0:
4. Replace the port (8001) with the relay port (default: 17999) and the host name ("stb") with 127.0.0.1
http://127.0.0.1:17999/1:0:19:0123:3EF:1:C00000:0:0:0:
5. Add the new stream link to your channel list (for example with DreamBoxEdit)
IMPORTANT:
Do NOT use the correct Transponder ID/Network ID/Namespace for the stream link.
Use Transponder ID: "11", Network ID: "22" and Namespace: "33".
Set Service Type to "1", and enter the correct Service ID for the channel.
Note:
When using DreamBoxEdit:
A. Go to the list in the middle "Bouquet details".
B. Right click on a channel, select "IPTV and other streaming services", select "Add".
C. Select "DVB/TS".
D. Chosse a name and use the new stream link as URL.
E. Use the "Service ID" of the original channel. You can find it in the left list ("Services")
I hope I was helpful!!!
oscam config
[global]
logfile = /dev/tty
netprio = 1
nice = -1
[newcamd]
port = 10001@0000:000000
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1
[cccam]
port = 12000
nodeid = 4736728B103213F0
version = 2.3.0
stealth = 1
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
delayer = 60
ecminfo_type = 4
user = localuser
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = dreambox
[monitor]
port = 988
nocrypt = 192.168.0.0-192.168.255.255
aulow = 120
monlevel = 4
hideclient_to = 0
[webif]
httpport = 8888
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
oscam server
#[reader]
#label = first_internal_reader
enable = 0
Detect = cd
protocol = internal
device = /dev/sci0
CAID = 0649
mhz = 600
cardmhz = 600
ident = 0649:000000,000001,000002,000003,266a91,ffffff
group = 1
lb_weight = 100
deprecated = 1
EMMCache = 1,1,10
[reader]
label = first_internal_reader
enable = 0
Detect = cd
protocol = internal
device = /dev/sci0
CAID = 0100
mhz = 500
cardmhz = 450
ident = 0100:000000,000001,000002,000003,266a91,ffffff
group = 1
lb_weight = 100
deprecated = 1
EMMCache = 1,1,10
[reader]
label = emulator
protocol = emu
caid = 2600,FFFF,0E00,1010
ident = 2600:000000;FFFF:000000;0E00:000000;1010:000000
device = /etc/tuxbox/config/SoftCam.Key
fallback = 1
detect = cd
group = 2
emmcache = 2,2,2,0
saveemm-u =1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000000
[reader]
label = AFN
de--SS--ion = AFN-EMU
protocol = emu
device = Emulator
caid = 0E00
detect = cd
group = 1
emmcache = 2,2,2,0
emu_auproviders = 0604:010200;0E00:000000;4AE1:000000
auprovid = 000E00
cacheex = 0
cacheex_maxhop = 1
cacheex_allow_request = 1
services = afn
[reader]
label = name of server_cccam
enable = 1
protocol = cccam
device = ip adress,port number
user = xxxxxxx
password = xxxxxxx
inactivitytimeout = 1
reconnecttimeout = 5
lb_weight = 100
cccmaxhops = 10
fallback = 1
group = 8
cccversion = 2.3.0
ccckeepalive = 1
oscam user
[account]
user = localuser
monlevel = 4
au = 1
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64
see the above image config is wrong config is shown in image plz help me to correct config .this is autolling powervu working well for me .im using oscam 11425 .image powersat image. this error also showing (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Invalid argument. plz help me
Don’t have an account yet? Register yourself now and be a part of our community!