getting the same issue with openatv.... Do you know of anyone that got it to work on the zgemma h7?.. it's puzzling me
Zgemma H7 with oscam. Resolved
-
- Arm OSCam
- conway
- Thread is marked as Resolved.
-
-
this is what I get when I install on openatv 6.0
zgemmah7 login: root
root@zgemmah7:~# opkg install /tmp/*.ipk
Installing enigma2-plugin-softcams-oscam.emu-11391.r751 (openpli) on root.
Configuring enigma2-plugin-softcams-oscam.emu-11391.r751.
Switching default softcam to oscam
Softcam is selected as default, (re)starting oscam
cat: can't open '/tmp/oscam.pid': No such file or directory
/etc/init.d/softcam.oscam: line 5: /usr/bin/oscam: cannot execute binary file: Exec format error
Collected errors:
* parse_from_stream_nomalloc: Missing new line character at end of file!
* parse_from_stream_nomalloc: Missing new line character at end of file!Sounds like your having a nightmare mate, i have attached ncam and oscam versions i know work with the h7 and openATV
I personally prefer ncam, it just works with everything i throw at it, all you need to do is edit ncam.server just like you would oscam.server
I also compiled openpli 6.1 with latest oscam the other day and that worked fine but that is still a test image and has differant issues
Ncam-all-images-OSDreamox--ARM-Open_Source_V1.9-r0.ipk
enigma2-plugin-softcams-oscam-11352-linuxsat_openatv_armv7ahf-vfp-neon.ipk
-
Awesome thank you! Good News NCAM installed.. I have rebooted my box.. now whats next?
Welcome to openATV for zgemmah7
openatv 6.0 zgemmah7zgemmah7 login: root
root@zgemmah7:~# opkg install /tmp/*.ipk
Installing enigma2-plugin-softcams-ncam-all-images (V1.9) on root.
Configuring enigma2-plugin-softcams-ncam-all-images.
openATV image
*******************************************
* Install Finished *
* *
* Need To Restart Enigma2 *
* *
* Patched and compile By marouan + RAED *
******************************************* -
Awesome thank you! Good News NCAM installed.. I have rebooted my box.. now whats next?
Welcome to openATV for zgemmah7
openatv 6.0 zgemmah7zgemmah7 login: root
root@zgemmah7:~# opkg install /tmp/*.ipk
Installing enigma2-plugin-softcams-ncam-all-images (V1.9) on root.
Configuring enigma2-plugin-softcams-ncam-all-images.
openATV image
*******************************************
* Install Finished *
* *
* Need To Restart Enigma2 *
* *
* Patched and compile By marouan + RAED *
*******************************************Edit your ncam.server file mate, if your new to oscam (or ncam in this case) then google how to change n/c lines to oscam...
Go to the ncam webif in your browser, your boxes ip address then :8181
Like this example
192.168.0.89:8181
-
good news I got oscam installed as well..
-
ok I got the server working but how to I enter the keys to the channels that I need?
-
ok I got the server working but how to I enter the keys to the channels that I need?
Okay back to your original powerVU question, you need a softcam.key file, you can download them on the forum...
For powerVU you also need to enable stream relay and make up a channel list for that
Both of those have been covered in great detail already, have a look here:
How to watch powervu with stream relay enabled |detail tutorial|
-
awesome thank you this is where I am so far
-
nice one you getting there, loads more reading and trial and error and you will get there....
If i get a chance over the weekend i will make a quick motorised backup, hopefully your sorted before then !:thumbup:
-
I really appreciate everyones help!! I am a fast learner but there is lots to this stuff! I having fun learning it though. It's a hobby!
-
wow I am not getting anywhere. I have followed the guide and still nothing... what am I doing wrong!.... sighh
-
Guys I am having the hardest time with this.. I just can't seem to figure out how this works or what needs to go where. I have read every tutorial I can find on this site and I still am not understading it.. everything I read they do something different than before.. very confusing. I did get my channel list set up for stream relay I think I figured that one out. I just can't figure out ncam or oscam on where or what needs to be set. very frustrating.
-
my latest log using ncam..
2017/10/19 20:51:15 1EF816B3 c (ecm) anonymous (0E00@000000/0000/006C/40:94605BAA02C2655BF34D6E1616C46D14): not found (1 ms) by emulator - SONY Movie Channel
2017/10/19 20:51:16 1EF816B3 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2017/10/19 20:51:16 1EF816B3 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 17DC ANY CHID PMTPID 13F4 VPID 0F14
2017/10/19 20:51:16 1646BC0B r (emu) Key not found: P 006C 00
2017/10/19 20:51:16 1646BC0B r (emu) ECM failed: Key not found
2017/10/19 20:51:16 1EF816B3 c (ecm) anonymous (0E00@000000/0000/006C/40:D1BBC283DBE16E2FBC4C7BE147A06535): not found (1 ms) by emulator - SONY Movie ChannelTotal: 7 Active: 1 Disabled: 6 Connected: 0 -
still not figuring this out. any ideas?
-
Use the attached configs.
Setup stream relay and channel list following the guide jensen linked in post #47
Key not found
This error means you aren`t using valid keys.
-
Thanks Master G.. i'v set up stream relay and set up the channel in my channel list that I am testing. I don't see any config files in post #55. thanks for your reply
Master G it's hard for us folks on the other side of the pond to find updated keys. can Ncam pull keys on its own without a EMM or ECM key?, I have a openbox z5 that autorolls keys on some channels but they have a strange way of configuring the softcam.key.
-
EMM or ECM key
You need a valid EMM key to autoroll.
I`ve attached the configs above.
-
I am sorry I overlooked those files.. I think I am getting somewhere.. but I have my channel list set up for the channel that I am on.. it looks like emu is decoding the channel but my screen is black.. does this look correct?
-
Looks like you have a valid key for that channel.
Try changing extended_cw_api = 2 to extended_cw_api = 1 in ncam.conf [dvbapi]
If that doesn`t work the problem will be with your channel list.
-
Thank You.. that didn't change anything.. I set my channel list up just like it was in the guide using dreambox edit.. wonder what I could be missing. a7dd51cdfa38c1edec2.png
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!