Please help with correct format for BISS key in constant.cw file

There are 25 replies in this Thread which was already clicked 13,047 times. The last Post () by mcmuzzy.

    Hi there


    l was hoping someone could please help or steer me in the right direction please


    with BISS keys for constant.cw from what i understand this is the formula and please correct me if i am wrong


    caid:provid:sid: pmt:ecm :vpid: key


    now lets say for example


    on dreambox when you press menu and then information then channel you get the following info needed


    caid is 06c7 provid is 0059 sid is 006F pmt is 16F7 ecm is 1FFF and vpid is 111F


    and then you can make the BISS format line


    06C7:000000:006F:13F7:1FFF:111F::00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; Channel Name (SAT Degrees)


    could somebody please explain to me how the key is worked out because every key i find online looks like this


    Biss Key : 43 21 AB 0F C4 32 1A 10


    or like this


    CW Biss Feed: F1 71 15 77 19 29 16 F4


    what i really need to know and how to do get these keys into this :00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    and is it the same for irdeto 2 as well please


    Any advise would be appreciated


    Thanking you in advance

    latest oscam emu (11391 r751) and up, is offering you (in oscam log) complete the lines of the accepting format (it is more than one) .

    for example , in "xsport channel " in 5E, when you selecting the channel,oscam log gives you the below


    • 2017/10/19 16:05:08 0E42EB99 r (emu) Key not found: F 41315981 00
    • 2017/10/19 16:05:08 0E42EB99 r (emu) Example key: F 41315981 00 XXXXXXXXXXXXXXXX ; 4.8E t:0045 pmt:1A13 sid:1A13 added: 2017-10-19 @ 16:05
    • 2017/10/19 16:05:08 0E42EB99 r (emu) Key not found: F 1A131A13 00
    • 2017/10/19 16:05:08 0E42EB99 r (emu) Key not found: F 1A131A14 00
    • 2017/10/19 16:05:08 0E42EB99 r (emu) Key not found: F 1A131A15 00
    • 2017/10/19 16:05:08 0E42EB99 r (emu) Key not found: F 1A131FFF 00
    • 2017/10/19 16:05:08 0E42EB99 r (emu) Key not found: F A11FEED5 00




    all these formats,are acceptable from oscam-emu,and you have just to insert it in the softcam.key file (of course and the valid key).

    just be carefull in the yellow one,as it is not using something "only one" from the channel,and may conflict with another channel,using sane id...

    ok kool i was looking around the net and also found you on another site where you explained this


    example

    SID 0007 -- VPID 008D -- 00 number -- key -- 111113311111133
    becomes this
    F 0007008D 00 1111113311111133 ;RTRS (16.0°E)


    is that correct ?

    • Official Post
    Quote from mcmuzzy

    if i am using oscam as cs should i also have it as softcam or can i use cccam or mgcamd

    OSCam will work as card reader, virtual reader / card share, server, emulator. It uses cccam and newcamd protocol, so you don`t need a separate CCcam or MGCam.

    Quote from paulus

    Where will I find the oscam log? (using OpenBH and oscam-ymod)

    At the oscam-ymod web interface in a browser http://ip.of.box:8888

    8888 is the webif port, you can find this in oscam.conf

    The oscam log contains the following re. the channel I want to open with a BISS key:


    2017/10/19 15:32:21 1856 749FF4A0 c linuxsatsupport (2600&000000/0001/1FFF/0000/03:0000/00-00): not found (0 ms) - 2600:0001 unknown
    2017/10/19 15:32:21 1856 749FF4A0 c linuxsatsupport (2600&000000/0001/1FFF/0000/03:0000/00-00): not found (0 ms) - 2600:0001 unknown
    2017/10/19 15:32:21 1856 749FF4A0 c linuxsatsupport (2600&000000/0001/1FFF/0000/03:0000/00-00): not found (0 ms) - 2600:0001 unknown
    2017/10/19 15:32:50 1856 749FF4A0 c dvbapi: [ADD PID 0] CAID: 2600 ECM_PID: 1FFF PROVID: 000000


    Am I correct in assuming that I need to add the line to constant.cw which currently has very few lines, or a different format line to SoftCam.Key where most of the BISS keys appear to be? If the latter, then I assume the line is:-

    F 00011FFF 00 Key

    F 00011FFF 01 Key

    But since this is identical to many other lines in my SoftCam.Key file I'm at a loss to know how oscamymod finds the right one?


    Please excuse my ignorance - I am trying hard to learn.

    i think you read only the half...

    i wrote above,that oscam 11391 -r751...etc

    you are trying to do the same in oscam ymod,which is too old version and does not support this...

    Having installed the latest oscam (as directed), I still fail to open a specific feed. The log shows:-


    2017/10/20 12:03:42 23DDD957 r (emu) Reading key file: /etc/tuxbox/config/SoftCam.Key
    2017/10/20 12:03:44 3CA460F9 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000
    2017/10/20 12:03:44 3CA460F9 c (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in caPMT
    2017/10/20 12:03:44 3CA460F9 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 0064 VPID 0065
    2017/10/20 12:03:44 23DDD957 r (emu) Key not found: F 70C06320 00
    2017/10/20 12:03:44 23DDD957 r (emu) Example key: F 70C06320 00 XXXXXXXXXXXXXXXX ; 22.0W 11162H pmt:0064 sid:0001 added: 2017-10-20 @ 12:03
    2017/10/20 12:03:44 23DDD957 r (emu) Key not found: F E9C9329A 00
    2017/10/20 12:03:44 23DDD957 r (emu) Key not found: F 07C753B6 00
    2017/10/20 12:03:44 23DDD957 r (emu) Key not found: F 9ECE020C 00
    2017/10/20 12:03:44 23DDD957 r (emu) Key not found: F 99A3C615 00


    I Inserted two lines (00 and 01) in the softcam.keys file BISS section using the F 70C0 . . . . from the above example, along with what I am assured is the current key. I inserted nothing into constant.cw - but the channels (there are four of them) don't open.


    What am I missing?

    I have tried so many keys none of them seem to work so I do not know even if I am doing it right.


    If anybody could please at least post just one working key that I can copy and paste into my softcam.key file or constant.cw so I can clear pics for at any channel on intelsat19 then I would have a concrete working formula to follow for other channels. Because I am not clearing pics for powervu I don't even know if I am doing anything right or wrong or if the keys are just finished.

    Quote from paulus

    Inspiral /etc/tuxbox/config

    That’s ok set softcam.key & constant.cw chmod(attributes) to 644


    Do you have dvbapi added in your Oscam configs ?


    I Notice you are using Oscam-ymod is there a reason you use this version?

    As Oscam alone will open BISS keys

    Oscam_emu or Ncam is needed tho If you want to open the powerVU channels

    If my post helps hit the Thanks ;-)

Keys for Biss Encrypted Feeds

Satellite TV biss keys for Athletics, Basketball, Biking, Boxing, Cage Fighting MMA - UFC, Cricket, Dutch TV, Equestrian, Football, Formula 1, Gymnastics, Handball, Ice Hockey, Martial Arts, Motorsport, NFL Football, Ping Pong, Rowing, Rugby, Sailing, Skateboarding, Soccer, Tennis, TV shows, Winter Sport, Wrestling, Test & Unknown feeds.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login