SifTeam 1.9.4C Oscam6574/CCcam2.1.3 Backup By Ten Below

just tried this on my eagle box and it killed it...... completely dead!!
There is no response from the remote or the power button. If i unplug the power and put it back in, the green light comes on but nothing else. It just doesn't boot at all.

NOT HAPPY

Thanks Ten, i've tried dreamup with a null modem cable but still no joy. Dreamup is not even picking up the eagle!
Here is the steps i'm doing:
1) connet laptop and eagle with null cable
2) start dreamup, select the correct port and click connect (status: connection prepared now switch on the dreambox)
3) Switch on the eagle (from the wall) the green power light comes on but no progress or log on dreamup.

Like i said before, the standby botton on the eagle and the remote nolonger works (ie no red standby light). When i turn is on, nothing come up on the tv. Not even a logo!

When i was flashing it, the eraseall part got to 100% and then it stopped...........and this is it since!

Any other help please?

Great image Ten, i flashed it over the "Gemini 4.70 Oscam & CCcam 2.13 UK Ready Backup" but the Irish variations are gone, is there any way I can get them back on?

I backed up the "Gemini 4.70 Oscam & CCcam 2.13 UK Ready Backup" image, can I extract it from that?

And Finally, Is there any waw to make the Audio Default onto plain English? On bothe these images, the movie channels always default to the Audio tracks for the blind (I think)

Cheers M8

Ten pls forgive me. I have wasted your time....
The dreamup worked. I turned out my com port was disable by windows..... all working now.

Can you advice on a good satellite listing / bouquets for a motorised system?
Also how do i install it?

Thanks again for your help.

Hi Ten

Excellant work dude, only 1 snag, im getting errors and i cant see my card entitlements and doesnt look like its reading it

how do i fix these errors below

Thanks in advance Kev

1970/01/01 01:00:16 0 s version=1.20-unstable_svn, build #6574, system=powerpc-tuxbox-linux, nice=-1
1970/01/01 01:00:16 0 s client max. idle=120 sec, debug level=0
1970/01/01 01:00:16 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
1970/01/01 01:00:16 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
1970/01/01 01:00:16 0 s The current system time is smaller than the build date (Mar 27 2012). Waiting up to 60 seconds for time to correct
2012/05/05 17:02:49 0 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2 No such file or directory)
2012/05/05 17:02:49 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/05/05 17:02:49 0 s signal handling initialized (type=sysv)
2012/05/05 17:02:49 0 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2012/05/05 17:02:49 0 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/05/05 17:02:49 0 s can't open file "/var/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/05/05 17:02:49 0 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
2012/05/05 17:02:49 0 s can't open whitelist file /var/tuxbox/config/oscam.whitelist
2012/05/05 17:02:49 0 s can't open cacheex-matcher file /var/tuxbox/config/oscam.cacheex
2012/05/05 17:02:49 0 s Starting listener 0
2012/05/05 17:02:49 0 s monitor: disabled
2012/05/05 17:02:49 0 s Starting listener 0
2012/05/05 17:02:49 0 s camd35: disabled
2012/05/05 17:02:49 0 s Starting listener 0
2012/05/05 17:02:49 0 s cs378x: disabled
2012/05/05 17:02:49 0 s Starting listener 0
2012/05/05 17:02:49 0 s newcamd: initialized (fd=5, port=10000, crypted)
2012/05/05 17:02:49 0 s -> CAID: 0963 PROVID: 000000
2012/05/05 17:02:49 0 s Starting listener 0
2012/05/05 17:02:49 0 s pandora: disabled
2012/05/05 17:02:49 0 s Starting listener 0
2012/05/05 17:02:49 0 s csp: disabled
2012/05/05 17:02:49 0 s Starting listener 0
2012/05/05 17:02:49 0 s radegast: disabled
2012/05/05 17:02:49 0 s starting thread http
2012/05/05 17:02:49 0 s http thread started
2012/05/05 17:02:49 0 s starting thread reader check
2012/05/05 17:02:49 0 s reader check thread started
2012/05/05 17:02:49 0 s starting thread check
2012/05/05 17:02:49 0 s check thread started
2012/05/05 17:02:49 0 s creating thread for device /dev/sci0
2012/05/05 17:02:49 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/05/05 17:02:49 0 s waiting for local card init
2012/05/05 17:02:49 10180A58 h HTTP Server listening on port 8888
2012/05/05 17:02:49 1017F038 r reader ***uk initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2012/05/05 17:02:51 0 s init for all local cards done
2012/05/05 17:02:51 0 s anti cascading disabled
2012/05/05 17:02:55 101855A8 c client connected to 10000 port
2012/05/05 17:02:56 101855A8 c encrypted newcamd:10000-client 127.0.0.1 granted (linuxsat, au=on (1 reader))
2012/05/05 17:02:56 101855A8 c user linuxsat authenticated successfully (CCcam)
2012/05/05 17:02:56 101855A8 c AU disabled for user linuxsat
2012/05/05 1702:56 101855A8 c linuxsat (0963&000000/0000/107D/62:7ADD): rejected user ident (0 ms) (0 of 0) (no card support 0963:000000)

Quote from bigtings

Ten pls forgive me. I have wasted your time....
The dreamup worked. I turned out my com port was disable by windows..... all working now.

Can you advice on a good satellite listing / bouquets for a motorised system?
Also how do i install it?

Thanks again for your help.

Display More

Give Catseye Motor Bouquet settings a try...

Upload them with DreamBoxEdit...

Works a treat!

Enjoy

Hi Ten Below,

Can these be use with a clone DM500S?

TQ