Need oscam configs for TV Vlaanderen Openatv Protek 991LX

jma_ · Nov 10th 2017

I own a Protek 9911LX that I am trying to get a TVV (TV Vlaanderen) card to work with. I have absolutely no idea how to do that but was hoping to find it on this forum.
And now ... I have absolutely no idea where to ask the question.

Could someone please point me in the right direction? In which part of the forum should I ask my question please?

kegnkiwi · Nov 10th 2017

Hey, a quick google search shows you box is an enigma 2 box, so if you could install the linuxsat panel then download oscam from your plugins section of your menu system, then go into the linuxst plugin you can download the oscam settings from oscam configs tab. This is shown below.

**master G** · Nov 10th 2017

Which enigma2 image are you using on the protek ?

jma_ · Nov 11th 2017

Thank you for your answers.

1. I have searched in the settings of my box but do not find where I can download and install the linuxsat panel.

2. How do I know what enigma2 image I am using now?

jma_ · Nov 11th 2017

Perhaps I should also mention that the box is now working with boris t through the internet and I just need to have the card as an extra because I actually pay the card to be able to listen to Flemish radio. But the card reader does not work on my box.

**master G** · Nov 11th 2017

Quote from jma_

How do I know what enigma2 image I am using now?

Press Menu > Information > About.

jma_ · Nov 11th 2017

press Menu > Information > About.

it says: OpenATV 6.0 - Python 2.7.12

**master G** · Nov 11th 2017

The attached oscam for openatv has configs included for TV Vlaanderen card.

[How To] Install an ipk file on any enigma2 receiver

jma_ · Nov 11th 2017

master G: Thank you very much! I will try to install and use that file.

jma_ · Nov 12th 2017

master G: I have installed the ipk file with USB stick. The protek automatically asked me if I wanted to install the file as soon as I had put the USB stick in it.

But I am not able to use it. With my Protek I can use softcams through a softcam panel. But there is no 'oscam 11392-tvvlaanderen' softcam to choose.

I do see 'oscam 11392' in the list to choose from, but when I choose to start that one, the card does not work.

I can see that caminfo (that is giving me my current channels - I know both can not work at the same time ...) stops working as soon as I start the softcam, but the card does not.

Is there something I am missing?

**jokosat** · Nov 12th 2017

try this ip box :8888 in u browser but u have to have oscam activated and check u oscam cfg in file ,server ,user

jma_ · Nov 12th 2017

jokosat : I am sorry but I really do not understand what you are trying to explain. My browser? What browser? Should I have a browser in the Protek?

**jokosat** · Nov 12th 2017

n u pc

google. ...ect

in u pc onpen google, internet ...ect

just ip is open webif

ip:8888 oscam or another emulation et u check cfg

92.168.x.x:8888

jma_ · Nov 12th 2017

when I visit that page with the URL of the Protek box 10.0.0.98:8888 it says:

403 Forbidden

Access denied.

jma_ · Nov 13th 2017

I have found 'oscam.conf' in the 'keys' folder and have added my IP address. Still the same: TVV card does not work. Page 10.0.0.98:8888 also not accessible via webbrowser (error = 403 Forbidden, access denied).

I then have found 'oscam_atv, oscam_atv_menu, oscam_atv_ymod and oscam_Dmod folders. In those folders there are also .conf files. I have added my IP address in all these files.

On the linux box it says: can not find 'oscam.conf' file when I try to activate 'oscam 11392'.

I feel stupid but really do not know why this seems to be so difficult.

**master G** · Nov 14th 2017

The oscam 11392 ipk i provided is mapped to use the configs in /usr/keys.

I`ve attached the configs for you.

Try changing httpallowed to this (already done in the attached configs):

Code

httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,::1

jma_ · Nov 14th 2017

master G : that made the webpage work!

I see this in the log on that page though:

2017/11/14 14:38:38 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11392 (mipsel-unknown-linux-gnu)

2017/11/14 14:38:38 00000000 s (main) System name = Linux

2017/11/14 14:38:38 00000000 s (main) Host name = 9911lx

2017/11/14 14:38:38 00000000 s (main) Release = 4.0.1

2017/11/14 14:38:38 00000000 s (main) Version = #1 SMP Mon May 29 12:09:38 CEST 2017

2017/11/14 14:38:38 00000000 s (main) Machine = mips

2017/11/14 14:38:38 00000000 s (main) Stb model = dm800se

2017/11/14 14:38:38 00000000 s (main) Stb vumodel = vuultimo

2017/11/14 14:38:38 00000000 s (main) Stb boxtype = 7225S

2017/11/14 14:38:38 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 16408

2017/11/14 14:38:38 00000000 s (emu) OSCam-Emu version 754

2017/11/14 14:38:38 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled

2017/11/14 14:38:38 00000000 s (main) signal handling initialized

2017/11/14 14:38:38 00000000 s (config) 1 provid's loaded

2017/11/14 14:38:38 00000000 s (config) 326 service-id's loaded in 10 ms

2017/11/14 14:38:38 00000000 s (net) newcamd: initialized (fd=4, port=34000, prio=1 [ SO_PRIORITY IP_TOS ])

2017/11/14 14:38:38 00000000 s (net) -> CAID: 0100 PROVID: 00006C

2017/11/14 14:38:38 00000000 s (net) cccam: initialized (fd=5, port=12000, prio=1 [ SO_PRIORITY IP_TOS ])

2017/11/14 14:38:38 00000000 s (reader) tvvlaanderen [internal] creating thread for device /dev/sci0

2017/11/14 14:38:38 00000000 s (reader) emulator [emu] creating thread for device emulator

2017/11/14 14:38:38 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)

2017/11/14 14:38:38 00000000 s (anticasc) anti cascading disabled

2017/11/14 14:38:38 0892408D c (client) plain dvbapi-client granted (linuxsatsupport, au=on (1 reader))

2017/11/14 14:38:38 38798D8F r (reader) tvvlaanderen [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)

2017/11/14 14:38:38 38798D8F r (reader) tvvlaanderen [internal] Reader sci internal, detected box type: 7225S

2017/11/14 14:38:38 4932D009 r (emu) Key file not found in: /usr/keys

2017/11/14 14:38:38 4932D009 r (emu) Key file not found in: /var/keys

2017/11/14 14:38:38 4932D009 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)

2017/11/14 14:38:38 0892408D c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)

2017/11/14 14:38:38 00000000 (emu) INFO: FFDecsa parallel mode = 64

2017/11/14 14:38:38 03B9AA2F h (webif) webif: decompressed 177772 bytes back into 437640 bytes

2017/11/14 14:38:38 03B9AA2F h (webif) HTTP Server running. ip=0.0.0.0 port=8888

2017/11/14 14:38:39 38798D8F r (reader) tvvlaanderen [internal] card detected

2017/11/14 14:38:39 4932D009 r (reader) emulator [emu] card detected

2017/11/14 14:38:39 38798D8F r (reader) tvvlaanderen [internal] ERROR: no characters found in ATR!

2017/11/14 14:38:39 38798D8F r (reader) tvvlaanderen [internal] Deactivating card

2017/11/14 14:38:39 38798D8F r (reader) tvvlaanderen [internal] Read ATR fail, attempt 1/5 fs = 3

2017/11/14 14:38:40 38798D8F r (reader) tvvlaanderen [internal] ERROR: no characters found in ATR!

2017/11/14 14:38:40 38798D8F r (reader) tvvlaanderen [internal] Deactivating card

2017/11/14 14:38:40 38798D8F r (reader) tvvlaanderen [internal] Read ATR fail, attempt 2/5 fs = 4

2017/11/14 14:38:40 4932D009 r (reader) emulator [emu] found card system emu

2017/11/14 14:38:40 4932D009 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1

2017/11/14 14:38:40 38798D8F r (reader) tvvlaanderen [internal] ERROR: no characters found in ATR!

2017/11/14 14:38:40 38798D8F r (reader) tvvlaanderen [internal] Deactivating card

2017/11/14 14:38:40 4932D009 r (emu) Key file not found in: /usr/keys

2017/11/14 14:38:40 4932D009 r (emu) Key file not found in: /var/keys

2017/11/14 14:38:40 38798D8F r (reader) tvvlaanderen [internal] Read ATR fail, attempt 3/5 fs = 5

2017/11/14 14:38:41 38798D8F r (reader) tvvlaanderen [internal] ERROR: no characters found in ATR!

2017/11/14 14:38:41 38798D8F r (reader) tvvlaanderen [internal] Deactivating card

2017/11/14 14:38:41 38798D8F r (reader) tvvlaanderen [internal] Read ATR fail, attempt 4/5 fs = 6

2017/11/14 14:38:41 38798D8F r (reader) tvvlaanderen [internal] ERROR: no characters found in ATR!

2017/11/14 14:38:41 38798D8F r (reader) tvvlaanderen [internal] Deactivating card

2017/11/14 14:38:41 38798D8F r (reader) tvvlaanderen [internal] Read ATR fail, attempt 5/5 fs = 7

2017/11/14 14:38:41 38798D8F r (reader) tvvlaanderen [internal] Error activating card.

2017/11/14 14:38:42 38798D8F r (reader) tvvlaanderen [internal] ERROR: no characters found in ATR!

2017/11/14 14:38:42 38798D8F r (reader) tvvlaanderen [internal] Deactivating card

2017/11/14 14:38:42 38798D8F r (reader) tvvlaanderen [internal] Read ATR fail, attempt 1/5 fs = 3

2017/11/14 14:38:42 38798D8F r (reader) tvvlaanderen [internal] ERROR: no characters found in ATR!

2017/11/14 14:38:42 38798D8F r (reader) tvvlaanderen [internal] Deactivating card

2017/11/14 14:38:42 38798D8F r (reader) tvvlaanderen [internal] Read ATR fail, attempt 2/5 fs = 4

2017/11/14 14:38:42 38798D8F r (reader) tvvlaanderen [internal] ERROR: no characters found in ATR!

2017/11/14 14:38:42 38798D8F r (reader) tvvlaanderen [internal] Deactivating card

2017/11/14 14:38:43 38798D8F r (reader) tvvlaanderen [internal] Read ATR fail, attempt 3/5 fs = 5

2017/11/14 14:38:43 38798D8F r (reader) tvvlaanderen [internal] ERROR: no characters found in ATR!

2017/11/14 14:38:43 38798D8F r (reader) tvvlaanderen [internal] Deactivating card

2017/11/14 14:38:43 38798D8F r (reader) tvvlaanderen [internal] Read ATR fail, attempt 4/5 fs = 6

2017/11/14 14:38:43 38798D8F r (reader) tvvlaanderen [internal] ERROR: no characters found in ATR!

2017/11/14 14:38:43 38798D8F r (reader) tvvlaanderen [internal] Deactivating card

2017/11/14 14:38:43 38798D8F r (reader) tvvlaanderen [internal] Read ATR fail, attempt 5/5 fs = 7

2017/11/14 14:38:43 38798D8F r (reader) tvvlaanderen [internal] Error activating card.

2017/11/14 14:38:44 38798D8F r (reader) tvvlaanderen [internal] ERROR: no characters found in ATR!

2017/11/14 14:38:44 38798D8F r (reader) tvvlaanderen [internal] Deactivating card

2017/11/14 14:38:44 38798D8F r (reader) tvvlaanderen [internal] Read ATR fail, attempt 1/5 fs = 3

2017/11/14 14:38:44 38798D8F r (reader) tvvlaanderen [internal] ERROR: no characters found in ATR!

2017/11/14 14:38:44 38798D8F r (reader) tvvlaanderen [internal] Deactivating card

2017/11/14 14:38:45 38798D8F r (reader) tvvlaanderen [internal] Read ATR fail, attempt 2/5 fs = 4

2017/11/14 14:38:45 38798D8F r (reader) tvvlaanderen [internal] ERROR: no characters found in ATR!

2017/11/14 14:38:45 38798D8F r (reader) tvvlaanderen [internal] Deactivating card

2017/11/14 14:38:45 38798D8F r (reader) tvvlaanderen [internal] Read ATR fail, attempt 3/5 fs = 5

2017/11/14 14:38:45 38798D8F r (reader) tvvlaanderen [internal] ERROR: no characters found in ATR!

2017/11/14 14:38:45 38798D8F r (reader) tvvlaanderen [internal] Deactivating card

2017/11/14 14:38:45 38798D8F r (reader) tvvlaanderen [internal] Read ATR fail, attempt 4/5 fs = 6

2017/11/14 14:38:46 38798D8F r (reader) tvvlaanderen [internal] ERROR: no characters found in ATR!

2017/11/14 14:38:46 38798D8F r (reader) tvvlaanderen [internal] Deactivating card

2017/11/14 14:38:46 38798D8F r (reader) tvvlaanderen [internal] Read ATR fail, attempt 5/5 fs = 7

2017/11/14 14:38:46 38798D8F r (reader) tvvlaanderen [internal] Error activating card.

2017/11/14 14:38:46 38798D8F r (reader) tvvlaanderen [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1

2017/11/14 14:38:46 38798D8F r (reader) tvvlaanderen [internal] card initializing error

jma_ · Nov 14th 2017

master G : I have turned the card upside down and now I get this, so I think that is the right way to put the card? But the channels are still scrambled for TVV.

2017/11/14 14:47:28 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11392 (mipsel-unknown-linux-gnu)

2017/11/14 14:47:28 00000000 s (main) System name = Linux

2017/11/14 14:47:28 00000000 s (main) Host name = 9911lx

2017/11/14 14:47:28 00000000 s (main) Release = 4.0.1

2017/11/14 14:47:28 00000000 s (main) Version = #1 SMP Mon May 29 12:09:38 CEST 2017

2017/11/14 14:47:28 00000000 s (main) Machine = mips

2017/11/14 14:47:28 00000000 s (main) Stb model = dm800se

2017/11/14 14:47:28 00000000 s (main) Stb vumodel = vuultimo

2017/11/14 14:47:28 00000000 s (main) Stb boxtype = 7225S

2017/11/14 14:47:28 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1290

2017/11/14 14:47:28 00000000 s (emu) OSCam-Emu version 754

2017/11/14 14:47:28 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled

2017/11/14 14:47:28 00000000 s (main) signal handling initialized

2017/11/14 14:47:28 00000000 s (config) 2 provid's loaded

2017/11/14 14:47:28 00000000 s (config) 327 service-id's loaded in 9 ms

2017/11/14 14:47:28 00000000 s (net) newcamd: initialized (fd=4, port=34000, prio=1 [ SO_PRIORITY IP_TOS ])

2017/11/14 14:47:28 00000000 s (net) -> CAID: 0100 PROVID: 00006C

2017/11/14 14:47:28 00000000 s (net) cccam: initialized (fd=5, port=12000, prio=1 [ SO_PRIORITY IP_TOS ])

2017/11/14 14:47:28 00000000 s (reader) tvvlaanderen [internal] creating thread for device /dev/sci0

2017/11/14 14:47:28 00000000 s (reader) emulator [emu] creating thread for device emulator

2017/11/14 14:47:28 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)

2017/11/14 14:47:28 00000000 s (anticasc) anti cascading disabled

2017/11/14 14:47:28 1839E5FF r (reader) tvvlaanderen [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)

2017/11/14 14:47:28 1839E5FF r (reader) tvvlaanderen [internal] Reader sci internal, detected box type: 7225S

2017/11/14 14:47:28 1FD78E71 c (client) plain dvbapi-client granted (linuxsatsupport, au=on (1 reader))

2017/11/14 14:47:28 622385CC r (emu) Key file not found in: /usr/keys

2017/11/14 14:47:28 622385CC r (emu) Key file not found in: /var/keys

2017/11/14 14:47:28 622385CC r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)

2017/11/14 14:47:28 1FD78E71 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)

2017/11/14 14:47:28 00000000 (emu) INFO: FFDecsa parallel mode = 64

2017/11/14 14:47:28 449B209A h (webif) webif: decompressed 177772 bytes back into 437640 bytes

2017/11/14 14:47:28 449B209A h (webif) HTTP Server running. ip=0.0.0.0 port=8888

2017/11/14 14:47:29 1839E5FF r (reader) tvvlaanderen [internal] card detected

2017/11/14 14:47:29 622385CC r (reader) emulator [emu] card detected

2017/11/14 14:47:30 622385CC r (reader) emulator [emu] found card system emu

2017/11/14 14:47:30 622385CC r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1

2017/11/14 14:47:30 622385CC r (emu) Key file not found in: /usr/keys

2017/11/14 14:47:30 622385CC r (emu) Key file not found in: /var/keys

2017/11/14 14:47:35 1839E5FF r (reader) tvvlaanderen [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6

2017/11/14 14:47:35 1839E5FF r (reader) tvvlaanderen [internal] Init card protocol T0, FI=1, F=372, D=1, N=1

2017/11/14 14:47:35 1839E5FF r (reader) tvvlaanderen [internal] Calculated work ETU is 74.40 us reader mhz = 500

2017/11/14 14:47:36 1839E5FF r (reader) tvvlaanderen [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)

2017/11/14 14:47:37 1839E5FF r (reader) tvvlaanderen [internal] detect seca/nagra tunneled card

2017/11/14 14:47:44 1839E5FF r (reader) tvvlaanderen [internal] Nagra layer found

2017/11/14 14:47:44 1839E5FF r (reader) tvvlaanderen [internal] Rom revision: DNASP400 RevI4G

jma_ · Nov 14th 2017

master G: It works!

I had to disable Boris T. But now it works!!

Thank you very very much!!

**master G** · Nov 14th 2017

Attached is a new ipk with recent changes.

Need oscam configs for TV Vlaanderen Openatv Protek 991LX

403 Forbidden

OSCam Support Forum

Participate now!

Share

Tags