this is what will not install
1 usr/bin/fullwget
2 iptvplayer/bin/wget
3 usr/bin/wget
4 rtmpdump isdeprecated will not install new one
5 user/bin/f4dump
5 iptvplayer/f4dump_static_libstdc++ fullwget:thumbdown:
There are 27 replies in this Thread which was already clicked 8,083 times. The last Post () by scaleovista.
this is what will not install
1 usr/bin/fullwget
2 iptvplayer/bin/wget
3 usr/bin/wget
4 rtmpdump isdeprecated will not install new one
5 user/bin/f4dump
5 iptvplayer/f4dump_static_libstdc++ fullwget:thumbdown:
The problem is probably related to the fact that you do not have libraries libssl.so.1.0.0 and libcrypto.so.1.0.0 in your image.
Please create symbolic links using following commands:
ln -s libssl.so.1.0.2 /usr/lib/libssl.so.1.0.0
ln -s libcrypto.so.1.0.2 /usr/lib/libcrypto.so.1.0.0
ln -s libssl.so.1.0.2 /lib/libssl.so.1.0.0
ln -s libcrypto.so.1.0.2 /lib/libcrypto.so.1.0.0
to fix the problem. Then you need to restart your E2.
Regards,
SSS
i have the sam problem zgemma h1 openpli 6.0 en 6.1
1 usr/bin/fullwget
2 iptvplayer/bin/wget
3 usr/bin/wget
4 rtmpdump isdeprecated will not install new one
5 user/bin/f4dump
5 iptvplayer/f4dump_static_libstdc++ fullwget
yes does not work ,i have tried everything
I'm back to openpli 4
system type : BCM7358A1 STB platform
machine : Unknown
processor : 0
cpu model : Broadcom BMIPS3300 V3.2
BogoMIPS : 749.56
cpu MHz : 751.498
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : no
isa : mips1 mips2 mips32r1
ASEs implemented : mips16
shadow register sets : 1
kscratch registers : 0
package : 0
core : 0
VCED exceptions : not available
VCEI exceptions : not available
The same problem still does not work,
Tanks
You have CPU without FPU. For more info about your problem please read here:
https://forums.openpli.org/top…corrupted-shared-library/
Please check if your CPU has FPU with command:
openpli 6.1-rc
XP1000
system type : BCM7358A1 STB platform
machine : Unknown
processor : 0
cpu model : Broadcom BMIPS3300 V3.2
BogoMIPS : 749.56
cpu MHz : 751.515
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : no
isa : mips1 mips2 mips32r1
ASEs implemented : mips16
shadow register sets : 1
kscratch registers : 0
package : 0
core : 0
VCED exceptions : not available
VCEI exceptions : not available
@scaleovista you have same CPU as @challou
It does not have FPU.
For more infor about problem with Kernel in OpenPLI 6.x for FPU less MIPSEL CPU:
I managed to get it to work.
system plugins
install serviceapp
activate it then open iptvplayer.
When it appears
Shuch as downloading and instalation additional binaries .
Charge exit.
When it appears
Are you sure to skip IPTVPlayer setup?
charge yes and IPTVPlayer starts working fine
No need to download anything to work
??
If you skip installing this binaries IPTVPlayer will NOT work proper.
Some functions for example subtitles download will not work at all.
Also some links will NOT be playable and so on.
I'm understanding, some work, thank you.
Please make update to "2017.12.09.01" and check if this version will improve your problem with installation of missing components.
Please note that workaround with symlink creation
Quoteln -s libssl.so.1.0.2 /usr/lib/libssl.so.1.0.0
ln -s libcrypto.so.1.0.2 /usr/lib/libcrypto.so.1.0.0
ln -s libssl.so.1.0.2 /lib/libssl.so.1.0.0
ln -s libcrypto.so.1.0.2 /lib/libcrypto.so.1.0.0
is still needed.
i have installed the update 01.09.12.2017 but is the same problem
i kan not install ::uchardet ,, f4mdump,,gstplayer:::
i have receiver zgemma h1 openpli 6
root@sh1:~# ln -s libssl.so.1.0.2 /usr/lib/libssl.so.1.0.0
ln: /usr/lib/libssl.so.1.0.0: File exists
root@sh1:~# ln -s libcrypto.so.1.0.2 /usr/lib/libcrypto.so.1.0.0
ln: /usr/lib/libcrypto.so.1.0.0: File exists
root@sh1:~# ln -s libssl.so.1.0.2 /lib/libssl.so.1.0.0
root@sh1:~# ln -s libcrypto.so.1.0.2 /lib/libcrypto.so.1.0.0
root@sh1:~#
the is iptv.dbg
change iptv.dbg.ipk to iptv.dbg
It looks like uchardet, f4mdump and gstplayer need to be re-build for SoftFPU CPU.
I will let you know when I do this.
Don’t have an account yet? Register yourself now and be a part of our community!