if you change between channels very quickly like between AFN Atlantic and AFN Pacific and cw0, cw1 coming from "Cache1" there audio "sound" and if cw0,cw1 coming from local there no audio
AFN’s switch to HD
-
- PowerVU Support
- matu2
- Closed
- Thread is marked as Resolved.
-
-
I try it now With GCam 1.5 and the Audio Work perfectly with cache3
you have to add this to gcam.server maybe will work oscam.server or ncam.server
[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
-
I try it now With GCam 1.5 and the Audio Work perfectly with cache3
you have to add this to gcam.server maybe will work oscam.server or ncam.server
[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
Many Thanks,
but not working when those 3 Lines are added to oscam.server,
when running oscam-emu 11392 r762 [on WooshBuild_v7.002/OpenATV_v6.1]
It causes blank screen for ALL PVU channels on 9E
& ALL Other Sats (noticed on: Discovery Nets on 4.8E, MTN on 20W, etc)
though OScam-WebIf indicates keys found.
-
So a quick hack for oscam-emu for my alien2 is working, but not tested at length and really a hack rather than a real solution...
Code
Display Morefor(i = program_info_length + program_info_start; i + 4 < length; i += es_info_length + 5) { uint8_t stream_type = buffer[i]; uint16_t elementary_pid = b2i(2, buffer + i + 1)&0x1FFF; uint8_t is_audio = 0; es_info_length = b2i(2, buffer + i +3)&0x0FFF; if (stream_type == 0x85) continue; if(demux[demux_id].STREAMpidcount < max_pids) // was "ECM_PIDS" (pid limiter) { demux[demux_id].STREAMpids[demux[demux_id].STREAMpidcount] = elementary_pid; demux[demux_id].STREAMpidsType[demux[demux_id].STREAMpidcount] = buffer[i]; demux[demux_id].STREAMpidcount++; cs_log_dbg(D_DVBAPI,"Demuxer %d stream %s(type: %02x pid: %04x length: %d)", demux_id, get_streamtxt(stream_type), stream_type, elementary_ pid, es_info_length); // find and register videopid if(!vpid && (stream_type == 0x01 || stream_type == 0x02 || stream_type == 0x10 || stream_type == 0x1B || stream_type == 0x24 || stream_type == 0x42 || stream_type == 0xD1 || stream_type == 0xEA)) { vpid = elementary_pid; if ((demux[demux_id].STREAMpidcount > 1) & (vpid != 1065) ) { demux[demux_id].STREAMpids[demux[demux_id].STREAMpidcount-1] = demux[demux_id].STREAMpids[0]; demux[demux_id].STREAMpidsType[demux[demux_id].STREAMpidcount-1] = demux[demux_id].STREAMpidsType[0]; demux[demux_id].STREAMpids[0] = elementary_pid; demux[demux_id].STREAMpidsType[0] = buffer[i]; } }
Line:
skips the first dts audio track
and following lines swap video and audio pids:
Codeif (demux[demux_id].STREAMpidcount > 1 ) { demux[demux_id].STREAMpids[demux[demux_id].STREAMpidcount-1] = demux[demux_id].STREAMpids[0]; demux[demux_id].STREAMpidsType[demux[demux_id].STREAMpidcount-1] = demux[demux_id].STREAMpidsType[0]; demux[demux_id].STREAMpids[0] = elementary_pid; demux[demux_id].STREAMpidsType[0] = buffer[i]; }
Sorry, I am tired and have a busy day tomorrow, so I do not have time to upload diffs, but there is not too much to change.
Good luck and I look forward to a better solution. :)
EDIT: Sorry, forgot to mention it is module-dvbapi.c, but I guess people would have figured that out...
attached is the binary I use for my alien2 (spark7162 - sh4)
-
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
works for me (all AFN with audio w/o stream relay), when I add those 3 lines to oscam.server (VU+ Solo SE, Oscam emu 11390)
-
all ok now . they fix it
-
AFN - FTA now
-
I WANT TO TESTED ???
-
I try it now With GCam 1.5 and the Audio Work perfectly with cache3
you have to add this to gcam.server maybe will work oscam.server or ncam.server
[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
Many Thanks,
but not working when those 3 Lines are added to oscam.server,
when running oscam-emu 11392 r762 [on WooshBuild_v7.002/OpenATV_v6.1]
It causes blank screen for ALL PVU channels on 9E
& ALL Other Sats (noticed on: Discovery Nets on 4.8E, MTN on 20W, etc)
though OScam-WebIf indicates keys found.
it works with GCam 1.5 Gcam 1.5
but other powervu channels who use DES HW will stop working
with oscam and ncam work but other encryption system like (BISS, Viaccess:SRG) will stop working
-
Now after the channels are encrypted again in oscam and ncam (sound is ok and no picture)
with GCam (sound and picture are ok)
-
After last changes, my hack is not necessary. All channels PMT's are like movie channel was from the beginning.
Of course that could change again... :)
-
can't get picture...just sound works properly with latest oscam on my zgemma star h2 on direct stream....I've tried adding those cacheex line on oscam.server but no luck so far...is there a patch needed or is there something I could do to get those channels working properly?
-
I have read that they are going on VERIMATRIX encription
-
nah just simulcrypt for newer boxes..switching to verimatrix it's almost impossible for them at the moment..they are not like a normal PayTV...they do not have funds to replace all the PowerVu HD boxes
-
Is there a fix in oscam-emu to get video back? Since mid-day I have had only audio, no video (reverse of yesterday).
-
Newbie to OSCAM here. I've been enjoying AFN for the past couple of week. Have rescanned and got the channels back, but exactly what do I need to change in SoftCam.Key to get them to open again. I have found the old entries (Group 0x9E - P 00090001 - 0009000B) but exactly what do I need to change. Any help would be most welcome.
replace old key with these new keys
P 0009006A 00 0123456789ABCD ;AFN Spectrum 9.0E
P 0009006A 01 0123456789ABCD ;AFN Spectrum 9.0E
P 00090066 00 0123456789ABCD ;AFN Prime Atlantic Benelux 9.0E
P 00090066 01 0123456789ABCD ;AFN Prime Atlantic Benelux 9.0E
P 00090069 00 0123456789ABCD ;AFN Prime Pacific 9.0E
P 00090069 01 0123456789ABCD ;AFN Prime Pacific 9.0E
P 0009006C 00 0123456789ABCD ;AFN Family 9.0E
P 0009006C 01 0123456789ABCD ;AFN Family 9.0E
P 0009006D 00 0123456789ABCD ;AFN Movie Channel 9.0E
P 0009006D 01 0123456789ABCD ;AFN Movie Channel 9.0E
P 00090067 00 0123456789ABCD ;AFN News 9.0E
P 00090067 01 0123456789ABCD ;AFN News 9.0E
P 00090068 00 0123456789ABCD ;AFN Sports 9.0E
P 00090068 01 0123456789ABCD ;AFN Sports 9.0E
P 0009006B 00 0123456789ABCD ;AFN Sports 2 9.0E
P 0009006B 01 0123456789ABCD ;AFN Sports 2 9.0E
P 0009 00544CE1 AB6A053EF67E7D ;EMM Key 9.0E
P 0009 00540716 FCCD8E6C12268A ;EMM Key 9.0E
P 0009 0057B90F 2C280A7807F63D ;EMM Key 9.0E
P 0009 003E7E84 1B80AA69C85E8B ;EMM Key
at moment there no audio I don't know if it's technical issue or we need new oscam patch
Will these keys work for AFN channels on 1w?
-
I have nothing changed, have ncam 3,2 and just rescaned new freq and work fine. vu+zero, openHDF 6,1.
-
Is there a fix in oscam-emu to get video back? Since mid-day I have had only audio, no video (reverse of yesterday).
Same as paulus , all AFN channels dark but audio is good on all 8 channels. OSCAM Live Log shows as the keys are good and the channel should be clear.
Setup: OSCAM-Emu r11392 on Vu+ Zero with OpenPLi 6 and a DM7020HD with OpenPLi 4
-
I try it now With GCam 1.5 and the Audio Work perfectly with cache3
you have to add this to gcam.server maybe will work oscam.server or ncam.server
[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
The fix work very well on DM900 with Dream Elite + Oscam-EMU.. but other biss or PW channels don't work
-
I try it now With GCam 1.5 and the Audio Work perfectly with cache3
you have to add this to gcam.server maybe will work oscam.server or ncam.server
[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
The fix work very well on DM900 with Dream Elite + Oscam-EMU.. but other biss or PW channels don't work
#
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
#
Works for me on Vu+ Zero and DM7020HD. I do not use BISS or other PV channels.
OSCam-EMU Support Forum
Configs, discussion, downloads and guides for OSCam-EMU Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!