Yes m8
Pli-4 with Oscam-emu
Post up your configs bud minus ya ports/users/passes
Yes m8
Pli-4 with Oscam-emu
Post up your configs bud minus ya ports/users/passes
Yes m8
Pli-4 with Oscam-emu
Post up your configs bud minus ya ports/users/passes
can u please post emu with working config will be higly appreciated.
I have both AFN and BISS working on oscam-emu 11392 using @joeuser's mods to oscam.server. While I am happy with this I note that oscam-emu has moved on to 11394 or even 11395. My question is whether these provide any advantage over what I currently have? Any updated user experience would be welcome.
Nothing of interest for most people in the last revisions. There have been some fixes to the oscam-emu patch for some powervu channels. But if you can see the channels you watch, it doesn't affect you.
oscam changelog is here: http://www.streamboard.tv/oscam/changeset/11393/trunk
oscam-emu patch changes here: https://github.com/oscam-emu/oscam-emu/commits/master
BTW - Many people are quick to rush out new versions of oscam/oscam-emu, but most of the time the latest changes have no affect on most users. So, unless you are having problems I would not bother updating and before updating you can look at the changes to see if they would even help before spending time on updating...
Yes m8
Pli-4 with Oscam-emu
Post up your configs bud minus ya ports/users/passes
can u please post emu with working config will be higly appreciated.
I am using - Oscam_emu v11279
Make sure you add the AFN details to your Oscam.services as posted earlier... post #51
heres my configs used for powervu
all the details to get this all up & running are here in this thread bud
just read throu ok
Oscam.conf
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 6
request_mode = 1
delayer = 60
user = dvbapi
read_sdt = 1
extended_cw_api = 2
boxtype = dreambox
Oscam.server
[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE
group = 12
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;4AE1:000011,000014,0000FE,0E00:000000
services = !afn
[reader]
label = AFN
protocol = emu
device = emulator
caid = 0E00
detect = cd
group = 3
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
services = afn
Is anyone clearing Discovery Networks on 4.8e & 0.8w
with todays posted keys?
Yes,with my VU+Solose,all OK.:thumbup:
Thanks alot for ur kind support can i use this oscam config in linux with dvbs2 card / astra cesbo and oscam-emu patched
Display MoreYes m8
Pli-4 with Oscam-emu
Post up your configs bud minus ya ports/users/passes
can u please post emu with working config will be higly appreciated.
I am using - Oscam_emu v11279
Make sure you add the AFN details to your Oscam.services as posted earlier... post #51
heres my configs used for powervuall the details to get this all up & running are here in this thread bud
just read throu ok
Oscam.conf
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 6
request_mode = 1
delayer = 60
user = dvbapi
read_sdt = 1
extended_cw_api = 2
boxtype = dreambox
Oscam.server
[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE
group = 12
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;4AE1:000011,000014,0000FE,0E00:000000
services = !afn
[reader]
label = AFN
protocol = emu
device = emulator
caid = 0E00
detect = cd
group = 3
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
services = afn
Try it bud
May need tweaking a bit likes ?
for me no works discovery afn yes i have put like this
[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE
group = 12
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;4AE1:000011,000014,0000FE,0E00:000000
services = !afn
[reader]
label = AFN
protocol = emu
device = emulator
caid = 0E00
detect = cd
group = 3
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
services = afn
Display Morefor me no works discovery afn yes i have put like this
[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE
group = 12
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;4AE1:000011,000014,0000FE,0E00:000000
services = !afn
[reader]
label = AFN
protocol = emu
device = emulator
caid = 0E00
detect = cd
group = 3
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
services = afn
same here m8, added the latest keys yesterday but no Discoverys working on 4.8 or 0.8w ?
i t works with me in linux pc with dvbs 2 astra cesbo with
afn eagle black screen others working
Display MoreYes m8
Pli-4 with Oscam-emu
Post up your configs bud minus ya ports/users/passes
can u please post emu with working config will be higly appreciated.
I am using - Oscam_emu v11279
Make sure you add the AFN details to your Oscam.services as posted earlier... post #51
heres my configs used for powervuall the details to get this all up & running are here in this thread bud
just read throu ok
Oscam.conf
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 6
request_mode = 1
delayer = 60
user = dvbapi
read_sdt = 1
extended_cw_api = 2
boxtype = dreambox
Oscam.server
[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE
group = 12
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;4AE1:000011,000014,0000FE,0E00:000000
services = !afn
[reader]
label = AFN
protocol = emu
device = emulator
caid = 0E00
detect = cd
group = 3
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
services = afn
When i use this config i lose the SIS / Bet Fred channels?
working fine here ;-)
did you add the afn details in oscam.services
i get audio no video i have vu zero obh image 4.0 and ncam v 3.9 kindly give the correct config file for ncam thank
Dont know the correct setup for a VU mate?
as the use of stream relay is needed & different configs to that used with Dreambox
ok thank youi i get the solution all AFN PACK OK 100% NCAM V 3.9
i get audio no video i have vu zero obh image 4.0 and ncam v 3.9 kindly give the correct config file for ncam thank
i am using vu+ zero with openatv 6.1 image all afn working wih ncam
i get audio no video i have vu zero obh image 4.0 and ncam v 3.9 kindly give the correct config file for ncam t
ok thank youi i get the solution all AFN PACK OK 100% NCAM V 3.9
I get audio too, but no video. I have vu uno 4k openatv6.1 and ncam v3.7. what solution help you?
i get audio no video i have vu zero obh image 4.0 and ncam v 3.9 kindly give the correct config file for ncam t
ok thank youi i get the solution all AFN PACK OK 100% NCAM V 3.9
I get audio too, but no video. I have vu uno 4k openatv6.1 and ncam v3.7. what solution help you?
Read post #51
Don’t have an account yet? Register yourself now and be a part of our community!