this is the version im using ,,,not sure which your box requires
https://linuxsat-support.com/c…ncam-images-mips-ipk-zip/
my configs
install ncam,,,,,restart the box ,,,,,replace the configs with these,,,,,,they work for me and auto update AFN
this is the version im using ,,,not sure which your box requires
https://linuxsat-support.com/c…ncam-images-mips-ipk-zip/
my configs
install ncam,,,,,restart the box ,,,,,replace the configs with these,,,,,,they work for me and auto update AFN
Display Morethis is the version im using ,,,not sure which your box requires
https://linuxsat-support.com/c…ncam-images-mips-ipk-zip/
my configs
install ncam,,,,,restart the box ,,,,,replace the configs with these,,,,,,they work for me and auto update AFN
perfect - many thanks for your feedback - i'll test everything later.
Unfortunately, even after installing the ipk, injecting your conf files and updating them, I cannot open the channels - only biss ones are ok - none of the powervu's are.
do you have a copy of the softcam files in /usr/keys
are the discovery channels on 4.8 clearing ?
check the ncam server for the locations of the softcam file and ,constant.cw ,,, locations and make sure they are in the correct location
Hello, @str01974
Delete all EMM keys from PV on bottom SoftCam.key , and restart ncam emu
to update new AU keys.
i did remove the old legacy files in /usr/keys and copied the ones from your conf setup.
as for the sofscan and constant they are also indeed under /etc/tuxbox/config as per the ncam.server file.
i also deleted the EMM keys and updated them but no luck :-(
sth i dont get, BISS keys and cccam servers are working ok - only powervu is KO.
Yes, you have oscam emu, not ncam ( I read wrong).
In that case Softcam.key must go to etc/tuxbox/config
This is my oscam server file. Try to change this two readers with your files.
[reader]
label = emulator
protocol = emu
device = emulator
services = !afn
disablecrccws_only_for = 0E00:000000
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,040810,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 1,5,31,1
disablecrccws = 1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FF;1010:000000
emu_datecodedenabled = 1
[reader]
label = AFN
protocol = emu
device = Emulator
services = afn
disablecrccws_only_for = 0E00:000000
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
caid = 0E00
ecmwhitelist = 0E00:99
detect = cd
group = 1
emmcache = 1,5,31,1
disablecrccws = 1
emu_auproviders = 0E00:000000
auprovid = 000E00
thanks but those 2 readers have to be modified on the oscam or ncam server file?
Yes, put my files and replace with those you have.
Yes, put my files and replace with those you have.
which files are you referring to? can you (re)link/attach them?
thanks in advance
Delete label emulator and label AFN in your server config
and put my in post #530.
ah my bad
Let me test but just to confirm, the readers have to only be edited in the oscam server file?
here is what i previously had
[reader]
label = emulator
protocol = emu
device = emulator
lb_whitelist_services = afn
disablecrccws_only_for = 0E00:000000
cacheex_maxhop = 1
cacheex_allow_request = 1
caid = 090F,0500,1801,0604,0E00,4AE1,1010,09BE,2600,FFFF
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;0E00:000000,000002;4AE1:000011,000014,0000FE;1010:000000;2600:000000;FFFF:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
auprovid = 000E00
[reader]
label = AFN
description = AFN-EMU
protocol = emu
device = emulator
services = afn
disablecrccws_only_for = 0E00:000000
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
caid = 0E00
ecmwhitelist = 0E00:99
detect = cd
group = 4
emmcache = 2,2,2,0
emu_auproviders = 0E00:000000
auprovid = 000E00
but i'll test with your setup
it works now in oscam emu! - many thanks for all of your help!
Im glad I helped you.
Regards and enjoy.
Since oscam-emu R780 version,
[reader]
label = AFN
is not necessary any more.
attached is my latest oscam.reader, working on dm & vu+.
Since oscam-emu R780 version,
[reader]
label = AFN
is not necessary any more.
attached is my latest oscam.reader, working on dm & vu+.
thanks will edit the server file to remove the AFN section
In version 11445 it says : set proper caid for channels you want enable stream relay.
How and were I do this?
Since I update to last version I have problems when I change from power Vu stream relay channels...
Thanks
I need a little more time to test it... but it seems to work perfectly!!
Thanks!!
Hello
Has there been any recent changes with the AFN channels (less than a couple of days ago)?
i 'm no longer getting sound/vision
i'm on oscam emu svn11444-r782.1
oscam.conf looks like this:
[global]
disablelog = 1
logfile = /dev/tty
initial_debuglevel = 64
preferlocalcards = 1
ecmfmt = c:p:s:d:i:o #ECM_L:l #CW=w HOP:j
disablecrccws_only_for = 0E00:000000
[cache]
[cs378x]
port = 12005
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
user = dvbapiau
read_sdt = 1
extended_cw_api = 2
boxtype = dreambox
[webif]
httpport = 8081
httprefresh = 60
httppollrefresh = 10
httpshowreaderinfo = 1
httpshowecminfo = 1
httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1
http_status_log = 1
and the oscam.server
[reader]
label = emulator
protocol = emu
device = emulator
lb_whitelist_services = afn
disablecrccws_only_for = 0E00:000000
cacheex_maxhop = 1
cacheex_allow_request = 1
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,2,2,0
saveemm-u = 1
emu_auproviders = 0604:010200;4AE1:000011,000014,0000FE,0E00:000000,0500:000000,FFFF:000000,2600:000000,1010:000000
auprovid = 000E00,0604:010200;4AE1:000011,000014,0000FE,0E00:000000,FFFF:000000,2600:000000,1010:000000
ccckeepalive = 1
[reader]
label = biss
protocol = emu
device = emulator
caid = 2600
detect = cd
ident = 2600:000000
group = 1
the emu is called but nothing on screen. keys are correctly updated via the afn keyupdater plug in.
this is odd as it previously worked.
any idea /suggestion?
thanks in advance
Don’t have an account yet? Register yourself now and be a part of our community!