i dont know if boot from front panel or rear switch i get the check tuner config
modem is arris model sb6183 and has been working with dreambox long time
you think i have no problems i cannot scan in a sat
l
i dont know if boot from front panel or rear switch i get the check tuner config
modem is arris model sb6183 and has been working with dreambox long time
you think i have no problems i cannot scan in a sat
l
sorry i know it is satellites.xml but my question is if all is working should
i be rerceiving sats over here just by using a north americam satellites.xml
dear archi your topic say to me Dead dreambox .
so i can only say it's not dead
i don't know your modem GUI so icant help at these step .
if you can connect with another dreamboxes and this router then you are correct the problem is from DM
for this sat i don't have any expereince ,
It is a lot more alive now than it was when started this.. ihave a dm800 se conected to my system now and i works fine..I think a boot from image would be a boot from front panel or rear switch
will try to load an image and if it works i think i am ok here
any way thanks for all the help
ar4chie
you said 920 tells you (waiting for dhcp)
this problem is very familiar for me
as i said before chech your router settings(on it's console) and check dhcp enabled then all your problems gone
dm800se and 920 are very differents in drivers at boot up and rescue mode
anyway we are here to help(maybe help)
you are welcome
can any one tell me wherethe satellites.xml file is located in a dm9210 box
thanks in advance
archie
/etc/tuxbox ? Is enigma2.
/etc or /etc/tuxbox
Better to load a channel list rather than scanning each satellite.
Do you have a fixed or motorised dish ?
/etc/tuxbox thank you
have 10 foot mesh with arm
10 foot mesh with arm
What is the range of satellites you can view ?
Range is about 61 t0133 degrees
have sent the box to dream land for repairs may be 30 days be bore i see ie again
how do i close this thread dont know a lot about using these things
thanks again archie
Don’t have an account yet? Register yourself now and be a part of our community!