try this
put to tmp
then over telnet
opkg install /tmp/*.ipk
try this
put to tmp
then over telnet
opkg install /tmp/*.ipk
Display Moretry this
put to tmp
then over telnet
opkg install /tmp/*.ipk
root@osmio4k:~# opkg install /tmp/*.ipk
Installing enigma2-plugin-softcams-oscam (11.585-emu) on root.
OE2.0 IMAGES: libssl.1.0.2
OE2.0 IMAGES: libcrypto.1.0.2
Configuring enigma2-plugin-softcams-oscam.
==================================================
:I m checking your device s processor ...
==================================================
:Your Device IS ARM processor ...
==================================================
GP4 image
openATV image
[ All Config Files found ]
--------------------------------------------------------
* OSCam Config & Softcam files in [/etc/tuxbox/config] *
--------------------------------------------------------
#==================================================#
# Patched and compile By << MOHAMED_OS >> 2020 #
# ..:: http://www.tunisia-sat.com ::.. #
# #
# Restart the Engima2 GUI to activate the plugin #
#==================================================#
Collected errors:
* pkg_get_installed_files: Failed to open ///var/lib/opkg/info/kernel-base.list: No such file or directory.
root@osmio4k:~#
In the softam menu it just doesn't come out
maybe your flash memory is full
did you reboot your receiver
Display Moretry this
put to tmp
then over telnet
opkg install /tmp/*.ipk
maybe your flash memory is full
did you reboot your receiver
The receiver restarted
In the plugins installed via the opkg list_installed command via telnet it exits but in the softcam menu it does not.
enigma2-plugin-softcams-cccam - 2.3.2-r1-de
enigma2-plugin-softcams-ncam-ipv4only - git10532 + f0578fc-r0
enigma2-plugin-softcams-oscam - 11.585-emu-r798
enigma2-plugin-softcams-oscam-stable - 1.20 + svn11581-r0
enigma2-plugin-softcams-oscam-trunk - 1.20 + svn11588-r0
In the plugins installed via the opkg list_installed command via telnet it exits but in the softcam menu it does not.
In the plugins installed via the opkg list_installed command via telnet it exits but in the softcam menu it does not.
maybe your flash memory is full
did you reboot your receiver
1.7GB flash memory
Free 894 MB
I had to activate it via telnet with command
cd / usr / bin
./oscam
but on complete reboot it doesn't work anymore and you have to activate it again via telnet
root@osmio4k:~# cd /usr/bin
root@osmio4k:/usr/bin# ./oscam
Configuration reader: corrected label to emulator_(constant.cw)
Configuration reader: corrected label to emulator_(SoftCam.key)
ERROR: 'mgcamd' is unsupported reader protocol!
try this oscam version in attachments
It works but at every complete reboot I have to wake up again with telnet, how do I make it stay active all the time?
please try this, don`t no will work
login by telnet
systemctl status
can,t active oscam
systemctl stop oscam
systemctl start oscam
systemctl restart oscam
systemctl status
active oscam
reboot
Display Moreplease try this, don`t no will work
login by telnet
systemctl status
can,t active oscam
systemctl stop oscam
systemctl start oscam
systemctl restart oscam
systemctl status
active oscam
reboot
Can you explain the procedure better? Entering those commands one at a time nothing happens
try entering one by one, not sure it will work
And anyway this also crashes and all servers disappear. It's strange
sorry I'm at a loss. I hope there are friends who have more knowledge
sorry I'm at a loss. I hope there are friends who have more knowledge
And ivece do you know how to delete from the softacam menu, oscam that are only there as a name, for example oscam but entering the information is empty?
FTP/usr/bin
FTP/etc/tuxbox
FTP/etc/init.d
or
opkg remove example enigma2-softcams-oscam-all-images
please use "like" button if you are satisfied thanks
Display MoreFTP / usr / bin
FTP / etc / tuxbox
FTP / etc / init.d
o
opkg remove esempio enigma2-softcams-oscam-all-images
Sono andato a etc / init.d e dato OSCAM 755 i permessi e ora rimane attivo dopo il riavvio completo
hurra great :thumbup::2pints:
hurra great :thumbup::2pints:
But now the problem of blocking and zeroing remains
@ elettrico68
Let's take it from the start ....it should work for all receivers where OpenAtv is installed
1) A fresh OpenATV 6.4 image
2) After all user settings are done( set a network password ) use Dcc or Putty (or others) to send this line by telnet (as teak-won-do has written so many times in this thread)......
........wget -O - -q http://updates.mynonpublic.com/oea/feed | bash............ -(Reboot)
3) Now in Menu/Plugins/Green Button you should see the Softcam Folder , click on it and download the cams you like (ncam cccam, Oscam (smod,trunk, emu or stable) read the differences for the various Oscam in this thread.......https://www.linuxsat-support.com/thread/122481-openatv-softcam-feed/ ........(already mentioned by teak-won-do)
All the cams you download have all necessary files they need apart of course your line that needs to be configured in Oscam server , CCcam.cfg or ncam server , all configs for ncam and oscam are in /etc/tuxbox/config (+ the name of oscam)
Important!!
If you install a softcam ipk file it'll work for sometime but at the first update of openatv they will disappear and you'll have to start all over again
(I think he'll be more confused now) :):):):):):)
Don’t have an account yet? Register yourself now and be a part of our community!