W@Rp can you put aarch64 oscam 11583 please?
OE2.0, ARM/Aarch64 Binaries for
# Edision OS:(Mio 4K) audi06_19
oscam-svn-lates_version-aarch64_osmino4k-webif-dvbapi-libusb-emu-upx.tar.gz
W@Rp can you put aarch64 oscam 11583 please?
OE2.0, ARM/Aarch64 Binaries for
# Edision OS:(Mio 4K) audi06_19
oscam-svn-lates_version-aarch64_osmino4k-webif-dvbapi-libusb-emu-upx.tar.gz
Display MoreDisplay MoreWith this config, I freeze only in the astra 19 degrees and on a number of channels of the tnt package such as gulli and le equipe and a few other channels.
[global]
logfile = /tmp/oscam.log
nice = -1
waitforcards = 0
dropdups = 1
failbantime = 1576800
failbancount = 7
readerrestartseconds = 1
[cache]
csp_port = 12000
csp_block_fakecws = 1
cwcycle_check_enable = 1
cwcycle_check_caid = 1843,1830
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 4
request_mode = 1
delayer = 60
ecminfo_type = 4
user = dvbapi
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = duckbox
-------------------------
[reader]
label = MyCcCam
protocol = cccam_mcs
device = ip,21000
user = user
password = pass
group = 1
disablecrccws = 1
cccversion = 2.0.11
And how can I add the channel profile (caid?) Like the image to disablecrccws_only_for
Because it has several caid and channel specifications
-------------------------
Can I add it this way to open all the channels and not freeze on some channels ?
[reader]
label = MyCcCam
protocol = cccam_mcs
device = ip,21000
user = user
password = pass
group = 1
cccversion = 2.0.11
disablecrccws_only_for = 09C4:0000 00;098C:000000;098D:000000;0E00:000000;0500:050F00
disablecrccws = 1
Hi
you search on provider csat and orange.
put ignore in your dvbapi
Thanks for your help
I entered Mr.MOHAMED_OS dvbapi config and the channels open, but with these settings I have a freeze on all channels.
[reader]
label = MyCcCam
protocol = cccam
device = ip,21000
user = user
password = pass
group = 1
cccversion = 2.0.11
inactivitytimeout = 30
reconnecttimeout = 1
And when I add ccckeepalive = 1, it does not connect to the server at all
Thank you for your help
Does this oscam support cccam.cfg?
All oscam support cccam protocol!
All oscam support cccam protocol!
Yes, but it is active in webif and global, but it does not show lines.
And does not recognize the cccam.cfg file if I enter the file address as well.
cccam.cfg should not recognize your data coming into oscam.server! was never different
Try replacing with this reader in oscam.server. I also have problem with freezing French channels ( TNTSat on 19.2E and ABSat on 13E )
Works only a few channels as TF 1 or sometimes some channels on 12692 H 27500 on 13E . All depends if "server owner" use this cards.
Refusing to load file '/tmp/Openatv-softcam-feed-universal_4.5-r0_all.ipk' as it matches the installed version of softcam-feed-universal (4.5-r0).
Unknown package '/tmp/Openatv-softcam-feed-universal_4.5-r0_all.ipk'.
Collected errors:
* opkg_solver_install: Cannot install package /tmp/Openatv-softcam-feed-universal_4.5-r0_all.ipk.
root@osmio4k:~#
that's logical if you've already installed the feed.
Then why don't you download the Oscam from the installed softcam feed? :59:
Yes, buYes, but bYes, but because while oscam emu is fine, it crashes and loses the connection with the servers and the cards are reset. Do you have any solution?ecause while oscam emu is fine, it crashes and loses the connection with the servers and the cards are reset. Do you have any solution?t because while oscam emu is fine, it crashes and loses the connection with the servers and the cards are reset. Do you have any solution?
that's logical if you've already installed the feed.
Then why don't you download the Oscam from the installed softcam feed? :59:
Yes, but because while oscam emu is fine, it crashes and loses the connection with the servers and the cards are reset. Do you have any solution?
try this oscam version in attachments
try this oscam version in attachments
But it has no ipk extension and can't install via blue key and ipk install, I unzipped the zip file and transferred it to temp folder, but it doesn't see it
after install to tmp folder go to telnet und write:
dpkg -i /tmp/*.deb
or
dpkg -i /tmp/*.deb
Display Moreafter install to tmp folder go to telnet und write:
dpkg -i /tmp/*.deb
or
dpkg -i /tmp/*.deb
Why do I get this out of installing osam emu via telnet?
Collected errors:
* pkg_get_installed_files: Failed to open ///var/lib/opkg/info/kernel-base.list
: No such file or directory
Display Moreafter install to tmp folder go to telnet und write:
dpkg -i /tmp/*.deb
or
dpkg -i /tmp/*.deb
root@osmio4k:~# dpkg -i /tmp/*.deb
-bash: dpkg: command not found
Must have ipk extension and not deb, edision osmio 4k is OE2.0 Enigma2:
Don’t have an account yet? Register yourself now and be a part of our community!