But other people look without freeze And after I rebooted, the ecm time decreased, but it is still freeze
Posts by mehrdad1370
-
-
NEXT->00: EE 08 D2 20 21 E8 C1
01: A12046517273C7
-
Hello
This is my oscam config, but it opens yes channels with freeze
Friends, do you have a better config so that these channels don't freeze?
Thankful
[global]
disablelog = 1
logfile = /dev/tty
clienttimeout = 7000
clientmaxidle = 240
bindwait = 60
netprio = 1
fallbacktimeout = 2000
nice = -1
maxlogsize = 1024
waitforcards = 0
waitforcards_extra_delay = 200
preferlocalcards = 1
block_same_ip = 0
block_same_name = 0
lb_mode = 1
lb_save = 100
lb_nbest_readers = 2
lb_nfb_readers = 2
lb_min_ecmcount = 3
lb_reopen_seconds = 120
lb_reopen_invalid = 0
lb_force_reopen_always = 1
lb_retrylimit = 500
lb_stat_cleanup = 24
lb_max_readers = 4
ecmfmt = P: c:0p:s:d:i #ECM_L:l #CW=w HOP:j
disablecrccws = 1
disablecrccws_only_for = 1709:000000;1708:000000;1811:003311,003315;09C4:000000;0500:030B00,042820,050F00;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000
cccam_cfg_enabled = 0
cccam_cfg_save = 1
cccam_cfg_repetitions_forced = 1
cccam_cfg_reconnect_delay = 90
cccam_cfg_reconnect_attempts = 10
[dvbapi]
enabled = 1
au = 1
pmt_mode = 4
request_mode = 1
delayer = 60
user = SMARTCAM
extended_cw_api = 1
[reader]
label = VIP1
protocol = cccam
device = 666666,22000
user = sfffff
password = ddrddd
inactivitytimeout = -1
reconnecttimeout = 10
group = 4
disablecrccws = 1
cccversion = 2.0.11
cccmaxhops = 2
keepalive = 1
emmcache = 2,1,2,1
Code
Display More(P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=9532E5ACA7A697E40000000000000000 HOP:01): found (3219 ms) by VIP3 (F/4/4/4) 2023/06/13 13:46:41 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=0000000000000000FBBE3AF327F6EC09 HOP:01): found (998 ms) by VIP4 (P/4/4/4) 2023/06/13 13:46:51 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=D6F214DCE13CBFDC0000000000000000 HOP:01): found (1533 ms) by VIP2 (P/4/4/4) 2023/06/13 13:47:04 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=0000000000000000068FF58A96B1276E HOP:01): found (4670 ms) by VIP2 (F/4/4/4) 2023/06/13 13:47:13 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=9A2767284155EC820000000000000000 HOP:01): found (2961 ms) by VIP2 (F/4/4/4) 2023/06/13 13:47:21 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=0000000000000000178B8224C0F327DA HOP:01): found (1213 ms) by VIP2 (P/4/4/4) 2023/06/13 13:47:31 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=DB29787CC6ABDA4B0000000000000000 HOP:01): found (874 ms) by VIP2 (P/4/4/4) 2023/06/13 13:47:43 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=0000000000000000893D50163B8F06D0 HOP:01): found (2947 ms) by VIP2 (F/4/4/4) 2023/06/13 13:47:51 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=2AFF4770BF0EBD8A0000000000000000 HOP:01): found (1333 ms) by VIP3 (P/4/4/4) 2023/06/13 13:48:06 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:01): not found (5801 ms) by VIP3 (F/4/4/4) 2023/06/13 13:48:06 76ADD071 c (dvbapi) Demuxer 0 restarting decoding requests after 4 ms with 1 enabled and 1 disabled ecmpids! 2023/06/13 13:48:06 76ADD071 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 090D PROVID 000000 ECMPID 0564 ANY CHID PMTPID 0000 VPID 0200 2023/06/13 13:48:06 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:01): not found (2 ms) by VIP1 (F/4/4/4) 2023/06/13 13:48:06 76ADD071 c (dvbapi) Demuxer 0 restarting decoding requests after 4 ms with 1 enabled and 1 disabled ecmpids! 2023/06/13 13:48:06 76ADD071 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 090D PROVID 000000 ECMPID 0564 ANY CHID PMTPID 0000 VPID 0200 2023/06/13 13:48:06 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:01): not found (2 ms) by VIP3 (F/4/4/4) 2023/06/13 13:48:07 76ADD071 c (dvbapi) Demuxer 0 restarting decoding requests after 4 ms with 1 enabled and 1 disabled ecmpids! 2023/06/13 13:48:07 76ADD071 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 090D PROVID 000000 ECMPID 0564 ANY CHID PMTPID 0000 VPID 0200 2023/06/13 13:48:07 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:01): not found (2 ms) by VIP3 (F/4/4/4) 2023/06/13 13:48:07 76ADD071 c (dvbapi) Demuxer 0 restarting decoding requests after 4 ms with 1 enabled and 1 disabled ecmpids! 2023/06/13 13:48:07 76ADD071 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 090D PROVID 000000 ECMPID 0564 ANY CHID PMTPID 0000 VPID 0200 2023/06/13 13:48:07 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:01): not found (2 ms) by VIP4 (F/4/4/4) 2023/06/13 13:48:08 76ADD071 c (dvbapi) Demuxer 0 restarting decoding requests after 4 ms with 1 enabled and 1 disabled ecmpids! 2023/06/13 13:48:08 76ADD071 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 090D PROVID 000000 ECMPID 0564 ANY CHID PMTPID 0000 VPID 0200 2023/06/13 13:48:08 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:01): not found (104 ms) by VIP1 (F/4/4/4) 2023/06/13 13:48:08 76ADD071 c (dvbapi) Demuxer 0 restarting decoding requests after 4 ms with 1 enabled and 1 disabled ecmpids! 2023/06/13 13:48:08 76ADD071 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 090D PROVID 000000 ECMPID 0564 ANY CHID PMTPID 0000 VPID 0200 2023/06/13 13:48:08 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:01): not found (2 ms) by VIP1 (F/4/4/4) 2023/06/13 13:48:09 76ADD071 c (dvbapi) Demuxer 0 restarting decoding requests after 4 ms with 1 enabled and 1 disabled ecmpids! 2023/06/13 13:48:09 76ADD071 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 090D PROVID 000000 ECMPID 0564 ANY CHID PMTPID 0000 VPID 0200 2023/06/13 13:48:09 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:01): not found (2 ms) by VIP1 (F/4/4/4) 2023/06/13 13:48:09 76ADD071 c (dvbapi) Demuxer 0 restarting decoding requests after 4 ms with 1 enabled and 1 disabled ecmpids! 2023/06/13 13:48:09 76ADD071 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 090D PROVID 000000 ECMPID 0564 ANY CHID PMTPID 0000 VPID 0200 2023/06/13 13:48:09 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:01): not found (3 ms) by VIP3 (F/4/4/4) 2023/06/13 13:48:10 76ADD071 c (dvbapi) Demuxer 0 restarting decoding requests after 4 ms with 1 enabled and 1 disabled ecmpids! 2023/06/13 13:48:10 76ADD071 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 090D PROVID 000000 ECMPID 0564 ANY CHID PMTPID 0000 VPID 0200 2023/06/13 13:48:10 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:01): not found (2 ms) by VIP1 (F/4/4/4) 2023/06/13 13:48:10 76ADD071 c (dvbapi) Demuxer 0 restarting decoding requests after 4 ms with 1 enabled and 1 disabled ecmpids! 2023/06/13 13:48:10 76ADD071 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 090D PROVID 000000 ECMPID 0564 ANY CHID PMTPID 0000 VPID 0200 2023/06/13 13:48:13 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=E4F42A02848320270000000000000000 HOP:01): found (2435 ms) by VIP4 (F/4/4/4) 2023/06/13 13:48:21 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=00000000000000005C455DFE6D7F3A26 HOP:01): found (1262 ms) by VIP3 (P/4/4/4) 2023/06/13 13:48:31 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=F0CBFDB8BFD5C85C0000000000000000 HOP:01): found (1718 ms) by VIP3 (P/4/4/4) 2023/06/13 13:48:44 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=0000000000000000FADE492148D0A1B9 HOP:01): found (3913 ms) by VIP2 (F/4/4/4) 2023/06/13 13:48:51 76ADD071 c (ecm) SMARTCAM (P: 090D::05DD:0564:05DD #ECM_L:B7 #CW=70A7A1B8C26595BC0000000000000000 HOP:01): found (875 ms) by VIP1
-
where i can download new
[OScam] dvbapi, service, srvid, srvid2
-
01:B1 93 2F 1A 22 CC 32=>Next
-
00: AD73C5FED70F93
-
01: 50 91 E2 14 86 65 C0
NEXT->00: D1 70 54 7B 3E A5 6D
please send new key like this format for open with ncam emu
-
Is there a way to enable icam on android receivers?
Does this receiver use oscam? If so, can the oscam version be changed, or is the firmware closed and doesn`t allow editing?
Yes, the latest version of Oscam is installed But it does not open with channel configuration Yes, Android source is closed, Has anyone been able to activate icam with this receiver model or is it not possible?
-
Is there a way to enable icam on android receivers?
like icon irone?
-
01 EC C3 CA 82 F9 C0 C2
-
00 5C 3A 4F C2 DD E2 0A
-
NEXT->01 EE A6 8D 75 E7 2E 1B
Mr The way you write the code is not correct and the channels do not open in ncam which automatically downloads the codes from this page But this code that I sent, the channels are opened
-
01:EE A6 8D 75 E7 2E 1B
-
Is afn autorolled again with this emm?
AFN autoroll emm.key work in hash mode 17 & clear picture
supported hash mode 17 firmware patch in some boxes .
P 0009 005C379D D374275FBF4A0F ;EMM Key
P 0009 005CDAE FA1A2056882210 ;EMM Key
Working autoroll EMM, and working keys
-
Why doesn't tvp 4k channel open on hotboard with frequency 10892 h 27500 I use oscam and this is my configuration, but this new channel does not open for me
Code[global] nice = -1 waitforcards = 0 preferlocalcards = 0 clienttimeout = 8 logfile = stdout disablecrccws_only_for=1708:000000;1811:003311,003315;09C4:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000,0B01:000000;1813:000068;092B:000000;1883:003311
-
Hello I use the latest version of ncam and config in the stapi 24 formular android receiver and it even receives the codes, but the sky channels do not open. Thank you for your guidance
-
Update ...
Ncam V13.4
-Added new ATR (Refresh some Prov. Info)
-Fixes (hopefully) the problems of v7. And there is a switch in the configuration menu to turn off ARM NEON support (can remain switched on for Mipsel/PC/...)
Download link in first post
Why afn channels do not open?
because there are no keys posted on the web yet....
try to understand how ncam works...
I know
It doesn't open at all for me
Whether a new code comes or not
Professor
-
Update ...
Ncam V13.4
-Added new ATR (Refresh some Prov. Info)
-Fixes (hopefully) the problems of v7. And there is a switch in the configuration menu to turn off ARM NEON support (can remain switched on for Mipsel/PC/...)
Download link in first post
Why afn channels do not open?
-
Hello
I want to enter the keys of the feed channels into the softcam, but it interferes with the keys of other channels
Like
F 00011FFF XXXXX
How can I find the specifications of the feed channel from OSCAM to enter the keys? Instead of this 1FFF
Thank you for helping me
-
I have problems with ncam 12.9 enigma2, vti, vu+ ultimo
root@vuultimo4k:/usr/bin# ./ncam -a
crashed with signal 11 on Wed Jul 20 08:04:31 2022
writing ncam.crash
warning: File "/lib/libthread_db-1.0.so" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
warning: Unable to find libthread_db matching inferior's thread library, thread debugging will not be available.
warning: File "/lib/libthread_db-1.0.so" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
warning: Unable to find libthread_db matching inferior's thread library, thread debugging will not be available.
root@vuultimo4k:/usr/bin#
More details please to get help ans support ...
On Which image did you test ncam ?!
Did you install ipk or sent bin file only ?!!
If you sent binary file !! did you install libcurl (important) ?!