The LATEST OSCAM-EMU FOR VARIOUS PLATFORMS Discussion and Request Thread

teak-won-do · Sep 24th 2020

Send ipk file via FTP (e.g. via DCC or FileZilla) to tmp> / var / temp

Connect to the box via Telnet and enter the following commands:

opkg install /tmp/*.ipk

reboot

SpartacusTed · Sep 24th 2020

MOHAMED_OS

Thank You very much 👍 work great Oscam 11635 🤝

ZuCarru · Sep 24th 2020

Quote from teak-won-do

Send ipk file via FTP (e.g. via DCC or FileZilla) to tmp> / var / temp

Connect to the box via Telnet and enter the following commands:

opkg install /tmp/*.ipk

reboot

Display More

I tried but it doesn't show up on openweb and not work

**MOHAMED_OS** · Sep 25th 2020

ZuCarru

sherif

delete srvid2 file and try again

Yawwilson · Sep 25th 2020

My dear friends, is C-band powervu not working?

I have tried 68.5east(HBO, CNN, and SKY news..no show), also tried 4.8east(AFN ) ..

I know someone has the solution, Kindly relief me of the stress..

SpartacusTed · Sep 25th 2020

After longer tests, I found a problem in the latest versions of oscam 11618 - 11635, the image freezes again and again after a few minutes of viewing for several seconds, there is nothing suspicious in the oscam log, I checked the older version 11603 and this problem does not occur here 🤔

JLcode · Sep 25th 2020

A new changeset 11638 is out, try it

**jenseneverest** · Sep 25th 2020

Guys, for a long time i have been saying the same thing, LOOK AT THE CHANGE LOG.

The newest, latest, shiny, oscam, and emu patch will do nothing for you..... unless there is something in the changes that will be of benefit

There has been a lot of change to oscam concerning cachex - for the most part of no use to most users....

And little has changed in the emu patch either (since July)

It would appear a fix for the recent .srvid problem is coming to the latest versions

See here for detail:

Code

https://github.com/oscam-emu/oscam-patched

and here:

https://trac.streamboard.tv/oscam/timeline?from=09%2F25%2F20&daysback=15&authors=&changeset=on&update=Update#

teak-won-do · Sep 25th 2020

my motto never change a running system

sagher · Sep 26th 2020

Quote from audi06_19

Full oscam binar

Code

    ___  ____   ___
   / _ \/ ___| / __|__ _ _ __ ___
  | | | \___ \| |  / _` | '_ ` _ \ 
  | |_| |___) | |_| (_| | | | | | |
   \___/|____/ \___\__,_|_| |_| |_|
   
+-------------------------------------------------------------------------------
| OSCam ver: build-DreamOSat-1.20_svn rev: 11638-798 target: arm-dreambox-linux-gnueabihf-ssl-libusb-pcsc
| Tools:
|  CROSS    = /home/dreamosat/s3-git/support/toolchains/dream_arm/bin/arm-dreambox-linux-gnueabihf-
|  CC       = /home/dreamosat/s3-git/support/toolchains/dream_arm/bin/arm-dreambox-linux-gnueabihf-gcc
| Settings:
|  CONF_DIR = /etc/tuxbox/config
|  CC_OPTS  = -Os -ggdb -pipe -ffunction-sections -fdata-sections
|  CC_WARN  = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition
|  CFLAGS   = -fexpensive-optimizations -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_PCSC=1 -I/home/dreamosat/s3-git/support/toolchains/dream_arm/arm-dreambox-linux-gnueabihf/sysroot/usr/include/PCSC -I/home/dreamosat/s3-git/support/toolchains/dream_arm/arm-dreambox-linux-gnueabihf/sysroot/usr/include/../local/include/PCSC -DWITH_UTF8=1 -DWITH_UTF8
|  LDFLAGS  = -Wl,--gc-sections -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_PCSC=1 -I/home/dreamosat/s3-git/support/toolchains/dream_arm/arm-dreambox-linux-gnueabihf/sysroot/usr/include/PCSC -I/home/dreamosat/s3-git/support/toolchains/dream_arm/arm-dreambox-linux-gnueabihf/sysroot/usr/include/../local/include/PCSC -DWITH_UTF8=1 -DWITH_UTF8
|  LIBS     = -lssl -lcrypto -lusb-1.0 -lrt -lpcsclite -lm -lpthread -ldl -lrt
|  UseFlags = USE_SSL=1 USE_LIBCRYPTO=1 USE_LIBUSB=1 USE_PCSC=1 USE_UTF8=1
| Config:
|  Addons   : WEBIF WEBIF_LIVELOG WEBIF_JQUERY TOUCH WITH_SSL HAVE_DVBAPI READ_SDT_CHARSETS IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CS_CACHEEX_AIO CW_CYCLE_CHECK LCDSUPPORT LEDSUPPORT CLOCKFIX WITH_EMU WITH_SOFTCAM
|  Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX RADEGAST SCAM SERIAL CONSTCW PANDORA GHTTP
|  Readers  : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
|  CardRdrs : PHOENIX INTERNAL SC8IN1 MP35 SMARGO DB2COM STAPI STINGER DRECAS SMART PCSC
|  Compiler : arm-dreambox-linux-gnueabihf-gcc (crosstool-NG 1.24.0.175_e6e39ea) 10.2.0
|  Config   : build/arm-dreambox-linux-gnueabihf-ssl-libusb-pcsc/config.mak
|  Binary   : /home/dreamosat/s3-git/support/binaries/oscam-svn11638-dream_arm-webif-dvbapi-ssl-libusb-pcsc-emu798
+-------------------------------------------------------------------------------

Display More

Code

Unix starttime: 1601037173
Starttime:      25.09.2020 15:32:53
Version:        oscam-build-DreamOSat-1.20_svn-r11638-798
Compiler:       arm-dreambox-linux-gnueabihf-ssl-libusb-pcsc
Box type:       dm900 (generic)
PID:            18339
TempDir:        /tmp/.oscam
GBox tmp_dir:   not defined using: /tmp/.oscam
ConfigDir:      /etc/tuxbox/config/
WebifPort:      8888

Web interface support:                   yes
LiveLog support:                         yes
jQuery support intern:                   yes
Touch interface support:                 yes
SSL support:                             yes
DVB API support:                         yes
DVB API with AZBOX support:              no
DVB API with MCA support:                no
DVB API with COOLAPI support:            no
DVB API with COOLAPI2 support:           no
DVB API with STAPI support:              no
DVB API with STAPI5 support:             no
DVB API with NEUTRINO support:           no
DVB API read-sdt charsets:               yes
Irdeto guessing:                         yes
Anti-cascading support:                  yes
Debug mode:                              yes
Monitor:                                 yes
Loadbalancing support:                   yes
Cache exchange support:                  yes
Cache exchange AIO support:              yes
CW Cycle Check support:                  yes
LCD support:                             yes
LED support:                             yes
Clockfix with realtime clock:            yes
IPv6 support:                            no
Emulator support:                        yes
Built-in SoftCam.Key:                    yes

camd 3.3x:                               no
camd 3.5 UDP:                            yes
camd 3.5 TCP:                            yes
newcamd:                                 yes
CCcam:                                   yes
CCcam share:                             yes
gbox:                                    yes
radegast:                                yes
scam:                                    yes
serial:                                  yes
constant CW:                             yes
Pandora:                                 yes
ghttp:                                   yes

Reader support:                          yes

Nagra:                                   yes
Nagra Merlin:                            yes
Irdeto:                                  yes
Conax:                                   yes
Cryptoworks:                             yes
Seca:                                    yes
Viaccess:                                yes
NDS Videoguard:                          yes
DRE Crypt:                               yes
TONGFANG:                                yes
Bulcrypt:                                yes
Griffin:                                 yes
DGCrypt:                                 yes

cardreader_phoenix:                      yes
cardreader_drecas:                       yes
cardreader_internal_azbox:               no
cardreader_internal_coolapi:             no
cardreader_internal_coolapi2:            no
cardreader_internal_sci:                 yes
cardreader_sc8in1:                       yes
cardreader_mp35:                         yes
cardreader_smargo:                       yes
cardreader_pcsc:                         yes
cardreader_smartreader:                  yes
cardreader_db2com:                       yes
cardreader_stapi:                        no
cardreader_stapi5:                       no
cardreader_stinger:                      yes

Display More

See for other binar files.

df88a.png

Display More

How to install it on linux VPSserver x64 ubuntu/debian ?

**lousio77** · Sep 26th 2020

wiith the last oscam bin version the restart gui need a lot of time to complete.only with reboot the box starts and oscam is ok.latest blackhole image vu uno 4k se.

ca2 · Sep 27th 2020

Hi everyone!

Oscam 11635 are not working on Open Droid 7.0 - Dinobot 4K Plus, i try with the version enigma2-plugin-softcams-oscam_11.635-emu-r798_IPK.

Yawwilson · Sep 27th 2020

Quote from ca2

Hi everyone!
Oscam 11635 are not working on Open Droid 7.0 - Dinobot 4K Plus, i try with the version enigma2-plugin-softcams-oscam_11.635-emu-r798_IPK.

Quote from MOHAMED_OS

@antrabe

Delete this oscam.srvid2 file in the configuration files and all ok

ca2 · Sep 27th 2020

I have done, but are not working.

ca2 · Sep 27th 2020

I gonna install another image and i will try again

amant · Sep 27th 2020

Ok, thanks

ca2 · Sep 27th 2020

Quote from Yawwilson

Quote from ca2

Hi everyone!
Oscam 11635 are not working on Open Droid 7.0 - Dinobot 4K Plus, i try with the version enigma2-plugin-softcams-oscam_11.635-emu-r798_IPK.

Quote from MOHAMED_OS

@antrabe

Delete this oscam.srvid2 file in the configuration files and all ok

Display More

My image i get working now with Cccam.

**MOHAMED_OS** · Sep 27th 2020

@ca2

Use the new version 11641

enigma2-plugin-softcams-oscam_11.641-emu-r798_IPK.zip

JLcode · Sep 27th 2020

do not use in every new oscam, a deb file.

Just replace the oscam bin

ZuCarru · Sep 28th 2020

Quote from MOHAMED_OS

ZuCarru
sherif
delete srvid2 file and try again

Thank you, now work perfectly

The LATEST OSCAM-EMU FOR VARIOUS PLATFORMS Discussion and Request Thread

OSCam-EMU Support Forum

Participate now!

Share

Tags

Users Viewing This Thread