The LATEST OSCAM-EMU FOR VARIOUS PLATFORMS Discussion and Request Thread
-
- Various Support
- elton74
- Thread is marked as Resolved.
-
-
Display More
thanks friend i will try :2pints:
ups was not for me
-
- OSCam r11675-798 Build By MOHAMED_OS work perfectly but 11677 dont work good.. something is wrong with this EMU
-
-
GigaBlue HD Quad Plus use arm version
test this include perfect patch
oscam-svn11677-Vuduo4k-emu-r798.zip
or ipk file
-
test this include perfect patch
What exactly is this "perfect patch" i have not been able to find a repo or any info on what this patch actually is or dose ??
-
-
Does this "perfect patch" worths using?
-
GigaBlue HD Quad Plus use arm version
test this include perfect patch
oscam-svn11677-Vuduo4k-emu-r798.zip
or ipk file
hi my friend,
this oscam version (oscam-svn11677-Vuduo4k-emu-r798.zip) don`t work for Gigablue HD Quad plus (no 4k), because use mipsel version
this work
enigma2-plugin-softcams-oscam_11.677-emu-r798_IPK.zip
thx for help
-
Hello to everyone.
I have an Amiko viper 4k v-20 combo and I would like to install oscam but I don't no how to. Can you help me? Thx
-
I tested the new Oscam 11677 Perfect Patch, unfortunately it does not work well on the C and Mg lines, and such lines, for example "C: Agud.tc", cannot be seen at all. Version 11675 has no such problems. I will refer to the Oscam emu version (all so far) on my 8008twin tuner after about 5 hours of multi-channel decoding Oscam stops showing picture and sound, turning Oscam off and on again at this time does not help, I have to beat Oscam, it is just starting to decode the image and sound, but for a short time and again no picture and sound, although in the oscam log it shows that the channels are decoded correctly, as if the cache, ram is clogged, I do not know, but when I turned off the emu in Oscam it all works fine. What's the problem ?
-
For what you need emu ? when you have proxy
-
-
-
Hi, I know it's in beta but which version of oscam should I install for OpenATV 6.5 - Amiko Viper 4k? Thank you.
-
-
Hello and thank you dear managers and friends, please guide me to the best and most excellent file configuration oscam.server Which of the 4 configurations and layouts I listed below? Thank you for your help.
1:Config 1
[reader]
label = MyCcCam_1
enable = 1
protocol = cccam
device = ***
user = ***
password = ***
inactivitytimeout = -1
reconnecttimeout = 10
cacheex_block_fakecws = 1
group = 1
cccversion = 2.0.11
cccmaxhops = 1 # dont use higher than 3 !!!
dropbadcws = 1
ccckeepalive = 1
cccwantemu = 1
[reader]
label = MyCcCam_2
enable = 1
protocol = cccam
device = ***
user = ***
password = ***
inactivitytimeout = -1
reconnecttimeout = 10
cacheex_block_fakecws = 1
group = 1
cccversion = 2.0.11
cccmaxhops = 1 # dont use higher than 3 !!!
dropbadcws = 1
ccckeepalive = 1
cccwantemu = 1
[reader]
label = MyCcCam_3
enable = 1
protocol = cccam
device = ***
user = ***
password = ***
inactivitytimeout = -1
reconnecttimeout = 10
cacheex_block_fakecws = 1
group = 1
cccversion = 2.3.0
cccmaxhops = 1 # dont use higher than 3 !!!
dropbadcws = 1
ccckeepalive = 1
cccwantemu = 1
[reader]
label = emulator
enable = 1
protocol = emu
device = emulator
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
2:Config 2
[reader]
label = cccam_1
enable = 1
protocol = cccam
device = ***
user = ***
password = ***
inactivitytimeout = 30
fallback = 0
group = 1
emmcache = 2,1,2,1
blockemm-g = 1
saveemm-g = 1
dropbadcws = 1
disablecrccws = 1
cccversion = 2.3.0
cccreshare = 0
audisabled = 1
[reader]
label = cccam_2
enable = 1
protocol = cccam
device = ***
user = ***
password = ***
inactivitytimeout = 30
fallback = 0
group = 1
emmcache = 2,1,2,1
blockemm-g = 1
saveemm-g = 1
dropbadcws = 1
disablecrccws = 1
cccversion = 2.3.0
cccreshare = 0
audisabled = 1
[reader]
label = cccam_3
enable = 1
protocol = cccam
device = ***
user = ***
password = ***
inactivitytimeout = 30
fallback = 0
group = 1
emmcache = 2,1,2,1
blockemm-g = 1
saveemm-g = 1
dropbadcws = 1
disablecrccws = 1
cccversion = 2.3.0
cccreshare = 0
audisabled = 1
[reader]
label = emulator
enable = 1
protocol = emu
device = emulator
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
3:Config 3
[reader]
label = cccam_1
protocol = cccam
device = ***
user = ***
password = ***
inactivitytimeout = -1
group = 1
disablecrccws = 1
cccversion = 2.3.0
[reader]
label = cccam_2
protocol = cccam
device = ***
user = ***
password = ***
inactivitytimeout = -1
group = 1
disablecrccws = 1
cccversion = 2.3.2
ccckeepalive = 1
[reader]
label = cccam_3
protocol = cccam
device = ***
user = ***
password = ***
inactivitytimeout = -1
group = 1
cccversion = 2.3.2
[reader]
label = emulator
enable = 1
protocol = emu
device = emulator
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
4:Config 4
[reader]
label = cccam_1
protocol = cccam
device = ***
user = ***
password = ***
inactivitytimeout = -1
group = 1
disablecrccws = 1
cccversion = 2.3.0
ccckeepalive = 1
[reader]
label = cccam_2
protocol = cccam
device = ***
user = ***
password = ***
inactivitytimeout = -1
group = 1
disablecrccws = 1
cccversion = 2.3.0
ccckeepalive = 1
[reader]
label = cccam_3
protocol = cccam
device = ***
user = ***
password = ***
inactivitytimeout = -1
group = 1
disablecrccws = 1
cccversion = 2.3.0
ccckeepalive = 1
[reader]
label = emulator
enable = 1
protocol = emu
device = emulator
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
-
Hey
config 4:
linuxsat-support.com/filebase/file/583/
disablecrccws = 1 = ? (Client )You from Germany why emu ?
-
The latest oscam version enigma2-plugin-softcams-oscam_11.678-emu-r798_all.ipk
-
The latest oscam version enigma2-plugin-softcams-oscam_11.678-emu-r798_all.ipk
the question is for best configuration not oscam binary ! stay by question
OSCam-EMU Support Forum
Configs, discussion, downloads and guides for OSCam-EMU Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!