where is post 1,832 i can find mait
The LATEST OSCAM-EMU FOR VARIOUS PLATFORMS Discussion and Request Thread
-
- Various Support
- elton74
- Thread is marked as Resolved.
-
-
where is post 1,832 i can find mait
Your post is # 1841, so just scroll back.
-
-
Hello, sometimes I have such a log between a working server on one channel, and during this time the image freezes 🤔
2022-02-04 21:03:33 1C285F6D c (dvbapi) Demuxer 0 received updated CA PMT for program 0A14
2022-02-04 21:03:33 1C285F6D c (dvbapi) Demuxer 0 continues descrambling for program 0A14
2022-02-04 21:03:33 1C285F6D c (dvbapi) Demuxer 0 found 2 ECM pids and 2 STREAM pids in CA PMT
-
Hi All
I have a working oscam binnary patched to support TNTSAT & FRANSAT emu on my ubuntu server. the only problem is that im stuck on r11862 build.
My question is: is there anyone who could help us to extract the patch to be able to apply it to the most recent versions.
Cheers and best regards.
-
Hi All
I have a working oscam binnary patched to support TNTSAT & FRANSAT emu on my ubuntu server. the only problem is that im stuck on r11862 build.
My question is: is there anyone who could help us to extract the patch to be able to apply it to the most recent versions.
Cheers and best regards.
you can not extract a binary file
unless you have access to the source patch
because oscam.bin file compressed with upx when compiled
-
hi i am searching for an oscam emu version of 11704 with webif & pcsc for vu duo 2 box please
if any1 can help me
thanks
-
hi i am searching for an oscam emu version of 11704 with webif & pcsc for vu duo 2 box please
if any1 can help me
thanks
-
thanks i have tried but doesnt work
i use openpli 7.0 but i need that versiuon with webif dvbapi pcsc for duo2 box
thanks for your help
-
thanks i have tried but doesnt work
i use openpli 7.0 but i need that versiuon with webif dvbapi pcsc for duo2 box
thanks for your help
we will need a lot more than "it doesn't work"
What exactly doesn't work ?
Where is the log ?
-
Give a telnet command and your oscam will start working
see my journal what i did
root@vuduo2:~# opkg update && opkg install libcurl4
Downloading http://downloads.openpli.org/f…ase/3rd-party/Packages.gz.
Updated source 'openpli-3rd-party'.
Downloading http://downloads.openpli.org/f…arty-mips32el/Packages.gz.
Updated source 'openpli-3rd-party-mips32el'.
Downloading http://downloads.openpli.org/f…-party-vuduo2/Packages.gz.
Updated source 'openpli-3rd-party-vuduo2'.
Downloading http://downloads.openpli.org/f…8-release/all/Packages.gz.
Updated source 'openpli-all'.
Downloading http://downloads.openpli.org/f…ease/mips32el/Packages.gz.
Updated source 'openpli-mips32el'.
Downloading http://downloads.openpli.org/f…elease/picons/Packages.gz.
Updated source 'openpli-picons'.
Downloading http://downloads.openpli.org/f…elease/vuduo2/Packages.gz.
Updated source 'openpli-vuduo2'.
Installing libssh2-1 (1.8.2) on root
Downloading http://downloads.openpli.org/f…1_1.8.2-r0.3_mips32el.ipk.
Installing libcurl4 (7.66.0) on root
Downloading http://downloads.openpli.org/f…_7.66.0-r0.3_mips32el.ipk.
Configuring libssh2-1.
Configuring libcurl4.
root@vuduo2:~# init 6
root@vuduo2:~#
-
hi i am searching for an oscam emu version of 11704 with webif & pcsc for vu duo 2 box please
if any1 can help me
thanks
;
-
ok thanks for helping
when i do opkg update && opkg install libcurl4
i dont get
Updated source 'openpli-vuduo2'.
Installing libssh2-1 (1.8.2) on root
Downloading http://downloads.openpli.org/f…1_1.8.2-r0.3_mips32el.ipk.
Installing libcurl4 (7.66.0) on root
Downloading http://downloads.openpli.org/f…_7.66.0-r0.3_mips32el.ipk.
Configuring libssh2-1.
& file above doesnt show my omnikey readers hence the pcsc bit
thanks
-
-
this information is what MOHAMED_OS posted
where I installed from the telnet opkg update && opkg install libcurl4
Unix starttime: 1645643426
Starttime: 23.02.2022 22:10:26
Version: oscam-1.20_svn-r11704-798
Compiler: mipsel-vuplus-linux-gnu-ssl-libcurl-libusb-pcsc
Box type: vuduo2 (generic)
PID: 719
TempDir: /tmp/.oscam
GBox tmp_dir: not defined using: /tmp/.oscam
ConfigDir: /etc/tuxbox/config/oscam-emu/
WebifPort: 8181
Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: no
SSL support: yes
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API with NEUTRINO support: no
DVB API read-sdt charsets: yes
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
Cache exchange AIO support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Clockfix with realtime clock: yes
IPv6 support: no
Emulator support: yes
Built-in SoftCam.Key: yes
camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: no
scam: yes
serial: no
constant CW: yes
Pandora: no
ghttp: no
Reader support: yes
Nagra: yes
Nagra Merlin: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes
cardreader_phoenix: yes
cardreader_drecas: no
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: yes
cardreader_sc8in1: no
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: yes
cardreader_smartreader: yes
cardreader_db2com: no
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: yes
-
# CONFIG_WITH_STAPI=n
# CONFIG_WITH_STAPI5=n
# CONFIG_WITH_COOLAPI=n
# CONFIG_WITH_COOLAPI2=n
# CONFIG_WITH_SU980=n
# CONFIG_WITH_AZBOX=n
# CONFIG_WITH_MCA=n
# CONFIG_WITH_LIBCRYPTO=n
CONFIG_WEBIF=y
CONFIG_WEBIF_LIVELOG=y
CONFIG_WEBIF_JQUERY=y
# CONFIG_TOUCH=n
# CONFIG_WITH_SSL=n
CONFIG_HAVE_DVBAPI=y
# CONFIG_WITH_NEUTRINO=n
CONFIG_READ_SDT_CHARSETS=y
CONFIG_IRDETO_GUESSING=y
# CONFIG_CS_ANTICASC=n
CONFIG_WITH_DEBUG=y
CONFIG_MODULE_MONITOR=y
CONFIG_WITH_LB=y
# CONFIG_CS_CACHEEX=n
# CONFIG_CS_CACHEEX_AIO=n
# CONFIG_CW_CYCLE_CHECK=n
# CONFIG_LCDSUPPORT=n
# CONFIG_LEDSUPPORT=n
# CONFIG_CLOCKFIX=n
# CONFIG_IPV6SUPPORT=n
CONFIG_WITH_EMU=y
# CONFIG_WITH_SOFTCAM=n
# CONFIG_MODULE_CAMD33=n
CONFIG_MODULE_CAMD35=y
CONFIG_MODULE_CAMD35_TCP=y
CONFIG_MODULE_NEWCAMD=y
CONFIG_MODULE_CCCAM=y
CONFIG_MODULE_CCCSHARE=y
# CONFIG_MODULE_GBOX=n
# CONFIG_MODULE_RADEGAST=n
# CONFIG_MODULE_SCAM=n
# CONFIG_MODULE_SERIAL=n
CONFIG_MODULE_CONSTCW=y
# CONFIG_MODULE_PANDORA=n
# CONFIG_MODULE_GHTTP=n
CONFIG_WITH_CARDREADER=y
CONFIG_READER_NAGRA=y
CONFIG_READER_NAGRA_MERLIN=y
CONFIG_READER_IRDETO=y
CONFIG_READER_CONAX=y
CONFIG_READER_CRYPTOWORKS=y
CONFIG_READER_SECA=y
CONFIG_READER_VIACCESS=y
CONFIG_READER_VIDEOGUARD=y
CONFIG_READER_DRE=y
CONFIG_READER_TONGFANG=y
CONFIG_READER_BULCRYPT=y
CONFIG_READER_GRIFFIN=y
CONFIG_READER_DGCRYPT=y
CONFIG_CARDREADER_PHOENIX=y
# CONFIG_CARDREADER_INTERNAL_AZBOX=n
# CONFIG_CARDREADER_INTERNAL_COOLAPI=n
# CONFIG_CARDREADER_INTERNAL_COOLAPI2=n
CONFIG_CARDREADER_INTERNAL_SCI=y
# CONFIG_CARDREADER_SC8IN1=n
# CONFIG_CARDREADER_MP35=n
CONFIG_CARDREADER_SMARGO=y
# CONFIG_CARDREADER_DB2COM=n
# CONFIG_CARDREADER_STAPI=n
# CONFIG_CARDREADER_STAPI5=n
CONFIG_CARDREADER_STINGER=y
# CONFIG_CARDREADER_DRECAS=n
CONFIG_CARDREADER_SMART=y
CONFIG_CARDREADER_PCSC=y
CONFIG_LIB_MINILZO=y
CONFIG_LIB_AES=y
CONFIG_LIB_RC6=y
CONFIG_LIB_SHA1=y
CONFIG_LIB_DES=y
CONFIG_LIB_IDEA=y
CONFIG_LIB_BIGNUM=y
CONFIG_LIB_MDC2=y
CONFIG_LIB_FAST_AES=y
CONFIG_LIB_SHA256=y
CONFIG_READER_NAGRA_COMMON=y
;
-
ok so after some issues with box a reflash etc
all is ok & on now with this version
OSCam-11704-798 (mipsel libusb pcsc).zip853.42 kB – 3 Downloads
thanks samur
-
-
MOHAMED_OS why your oscam Windows allways change the date?
Thanks mate for all your work
-
I greet the Administrators and members and to ask One question if they would do the configuration for me Oscam to set up here a folder of my configuration for Viper Combo
OSCam-EMU Support Forum
Configs, discussion, downloads and guides for OSCam-EMU Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!