what's ssION?
thanks
There are 97 replies in this Thread which was already clicked 37,350 times. The last Post () by bad_access.
what's ssION?
thanks
For Ssl build
Include openssl & libcrypto for extra functions
Latest Oscam-emu for gx chip
Unzip and upload in folder /home/gx/local/oscam/ with executable rights.(755)
-For all gx boxes
Thanks the Edision and OScam developers
oscam r11521-796 fixed
-[Added support for a higher number of demux devices in CA PMT]
Modern enigma2 boxes with FCB tuners can have many demux devices,
so a new CA PMT descriptor that allows up to 128 demuxes (descriptor tag 0x86) is now supported.
Also, the get_demux_options() function is completely re-written,
so it doesn't care for the order of descriptors inside the CA PMT message.
git-svn-id: http://www.streamboard.tv/svn/oscam/trunk@11520 4b0bc96b-bc66-0410-9d44-ebda105a78c1
-[small cleanup]
git-svn-id: http://www.streamboard.tv/svn/oscam/trunk@11519 4b0bc96b-bc66-0410-9d44-ebda105a78c
-[fix webif save issue with high var count]
Display More
Latest Oscam-emu for gx chip
Unzip and upload in folder /home/gx/local/oscam/ with executable rights.(755)
-For all gx boxes
Quote[- Revert 11522 and applied correct fix made by nautilus7]
git-svn-id: http://www.streamboard.tv/svn/oscam/trunk@11523 4b0bc96b-bc66-0410-9d44-ebda105a78c1
Thanks the Edision and OScam developers
Latest Oscam-emu for gx chip
Unzip and upload in folder /home/gx/local/oscam/ with executable rights.(755)
-For all gx boxes
-[biss] Bug fixes and improvements to BISS2 mode CA
-[osemu] Cleaned up error codes and did some cosmetics
Thanks the Edision and OScam developers
build : @enigma1969 & @medousa89
Latest Oscam-emu for gx chip
Unzip and upload in folder /home/gx/local/oscam/ with executable rights.(755)
-For all gx boxes
changes log oscam:
r11529
[dvbapi] Moved #define's to header file and made a few cosmetic changes
The CA PMT list management defined values are updated with proper info from the corresponding standard, instead of using OpenPLi's poor explanatory text.
r11528
[dvbapi] Moved parsing of CA descriptor to a separate function
This is necessary for the upcoming changes.
r11527
[dvbapi] Moved reading of priority entries in separate functions
r11526
[dvbapi] When parsing PAT, save found PMT pid in the demuxer
This way we can later start the PMT filter without explicitly passing the PMT pid.
r11525
[dvbapi] Changes to a couple of log messages
r11524
[dvbapi] Changed variable name (cosmetic)
dvbapi_parse_capmt() returns the demux_id, not the pmt_pid, so use a proper variable name.
Thanks the Edision and OScam developers
build : @enigma1969 & @medousa89
Latest Oscam-emu for gx chip
Unzip and upload in folder /home/gx/local/oscam/ with executable rights.(755)
-For all gx boxes
changes log oscam:
r11532
[dvbapi] Small fix to previous commit
r11531
[dvbapi] DVBAPI_CA_SET_DESCR_DATA struct was not sent correctly to network clients
r11530
[dvbapi] Fixed compilation with coolapi
Silly bug introduced in rev. 11529, where some #define values were renamed.
changes log oscam-emu:
r797
[powervu] Added hash mode 33
Thanks the Edision and OScam developers
build : @enigma1969 & @medousa89
Latest Oscam-emu for gx chip
Unzip and upload in folder /home/gx/local/oscam/ with executable rights.(755)
-For all gx boxes
changes log oscam:
r11533
[dvbapi] Rewritten the CA PMT parsing code
Some key notes for this revision:
-The CA PMT and PMT parsing code is split into separate functions. Additional functionality is also moved to different functions.
-The previous CA PMT parsing logic is retained (written by theparasol), but the code is much simpler, easier to maintain and a bit faster.
-The CA PMT message is not completely parsed now if there is no need for it (e.g. no change is made to the channel).
-The PMT is now parsed only if it's necessary (e.g. for powervu channels, when no streams are present in CA PMT, etc).
-Added preliminary support for reading the "ca_pmt_cmd_id" value. A future update (in oscam and enigma2) will allow using multiple oscam instances simultaneously.
-Added support for a new descriptor with tag 0x87 in the CA PMT message, used exclusively for sending the ca device information.
-Added detailed information for the private CA PMT descriptors supported by oscam in the readme (for dvbapi client developers).
Users experiencing problems with this revision (especially with "exotic" boxes), please report in the forum: http://www.streamboard.tv/wbb2/thread.php?threadid=46341
r11534
[dvbapi] Fixed previous commit when WITH_EXTENDED_CW is enabled
Thanks the Edision and OScam developers
build : @enigma1969 & @medousa89
Latest Oscam-emu for gx chip
Unzip and upload in folder /home/gx/local/oscam/ with executable rights.(755)
-For all gx boxes
change log oscam:
r11535
[dvbapi] Tryfix for various boxes not working after 11533
It seems there are more retarded boxes out there that set the ca_pmt_cmd_id to 0 instead of a proper value.
Thanks the Edision and OScam developers
build : @enigma1969 & @medousa89
Latest Oscam-emu for gx chip
Unzip and upload in folder /home/gx/local/oscam/ with executable rights.(755)
-For all gx boxes
change log oscam:
r11536
[dvbapi] Fixed "ca_pmt_cmd_id" value for PMT files
-For CA PMT messages received via PMT files, set the "ca_pmt_cmd_id" to a proper value (ok_descrambling) instead of zero.
-Also made few cosmetic changes
Thanks the Edision and OScam developers
build : @enigma1969 & @medousa89
Latest Oscam-emu for gx chip
Unzip and upload in folder /home/gx/local/oscam/ with executable rights.(755)
-For all gx boxes
changes log oscam:
r11537
[dvbapi] Reworked "ca_pmt_cmd_id" skipping logic
According to the spec (https://www.dvb.org/resources/…/standards/En50221.V1.pdf), the "ca_pmt_cmd_id"
value shall be present inside the ES info loop. Unfortunately, each dvbapi client does each own thing. The
only reliable way to detect when this info is present in the CA PMT is to actually check its value, like it
was done in the old code.
Most boxes always send the typical value of 0x01 (ok_descrambling) and the above check works fine because
there is no descriptor_tag 0x01 to get confused with. On the contrary, for enigma2, values like 0x03 (query),
0x04 (not_selected) are possible (not yet, but soon). Skipping these higher values the same way will not work,
because descriptors with such tags can exist, so a different check is implemented for enigma2.
In practice, this commit fixes the VDR dvbapi plugin, as well as the enigma2 boxes with wrong dvbapi boxtype
setting ("none" instead on the correct "dreambox" - the setting is irrelevant now, but will make a difference
in the future, so make sure you set it correctly).
Thanks the Edision and OScam developers
build : @enigma1969 & @medousa89
Latest Oscam-emu for gx chip
Unzip and upload in folder /home/gx/local/oscam/ with executable rights.(755)
-For all gx boxes
changes log oscam:
r11539
-[dvbapi] Added option to enable/disable ecm.info file creation
Thanks to the guys providing the patches.
http://www.streamboard.tv/oscam/ticket/4738
r11538
-[documentation] Whitespace cleanup
changes log oscam-emu:
r797
-[biss] Clean up and bug fixes in Mode 1
Removed support for transiotional revisions r749, r750 and r751 to siplify the code a little bit. Also did some optimizations and fixed a couple of small bugs.
Latest Oscam-emu for gx chip
Unzip and upload in folder /home/gx/local/oscam/ with executable rights.(755)
-For all gx boxes
changes log oscam:
r11540
[dvbapi] SDT parsing optimizations
The actual string parsing and supported character sets remained the same (still some eastern character sets are not supported).
Thanks the Edision and OScam developers
build : @enigma1969 & @medousa89
Latest Oscam-emu for gx chip
Unzip and upload in folder /home/gx/local/oscam/ with executable rights.(755)
-For all gx boxes
changes log oscam:
r11541
[dvbapi] Display service name when zapping
If present in oscam.srvid or oscam.srvid2, the service name is displayed at channel zap (like it was done before the CA PMT rewrite).
Thanks the Edision and OScam developers
build : @enigma1969 & @medousa89
Latest Oscam-emu for gx chip
Unzip and upload in folder /home/gx/local/oscam/ with executable rights.(755)
-For all gx boxes
changes log oscam:
r11544
[dvbapi] Added more PMT audio descriptors
r11543
[dvbapi] Cosmetics and minor optimizations
r11542
[dvbapi] CAT filtering optimizations
build : @enigma1969 & @medousa89
Latest Oscam-emu for gx chip
Unzip and upload in folder /home/gx/local/oscam/ with executable rights.(755)
-For all gx boxes
changes log oscam-emu:
r798
build : @enigma1969 & @medousa89
Latest Oscam-emu for gx chip
Unzip and upload in folder /home/gx/local/oscam/ with executable rights.(755)
-For all gx boxes
change log oscam:
r11561
[dvbapi] Always regard stream_type 0x81 as audio (ac3) without looking for the ac3_descriptor
This fixes some not ATSC complaint channels reported with no sound.
Thanks nautilus7 for providing another contribution!
r11560
- Remove more dvbapi logspam
r11559
Fix: valid section length is minimal 4
r11558
- Newcamd: Corrected brain fart commit (zero check was even already present)
- Camd35: Add protection against empty ecms
r11557
- More fix for malformed ecm request as described in ticket 4760
r11556
- Refactor handling of command packages
- Add generic command package dump to assist in debugging
- Remove the now superfluous dumps that were thrown while processing the commands
r11555
- Add generic hardening against empty ecm. It makes no sense to process empty ecms at all!
r11554
- Implement changes needed as researched by t5b6_de for dvbapi client protocol V3
r11553
- More fix due to bad refactoring commits
r11552
[gbx remm]
- allow remm request for unknown emm
[gbx]
- dont send via issuer as peer card
r11551
- Tryfix regression due to furious refactoring without unittests
r11550
- Final refactoring step of dvbapi_get_packet_size()
r11549
- More furious refactoring since I still wasnt happy with the resulting code!
r11548
- Just refactoring due to investigating an issue with CAPMT parsing
r11547
[gbx remm]
- fix card not updated if entitlements are expired
- new gbox reader parameter 'force_remm'
- dont send same successive remm twice
Thanks the Edision and OScam developers
build : @enigma1969 & @medousa89
Latest Oscam-emu for gx chip
Unzip and upload in folder /home/gx/local/oscam/ with executable rights.(755)
-For all gx boxes
Thanks the Edision and OScam developers
build : @enigma1969 & @medousa89
Latest Oscam-emu for gx chip
Unzip and upload in folder /home/gx/local/oscam/ with executable rights.(755)
-For all gx boxes
Thanks the Edision and OScam developers
build : @enigma1969 & @medousa89
Don’t have an account yet? Register yourself now and be a part of our community!