NCam 1.9-r1 (official)
Changelog v1.9-r1:
- Support for CCcam 2.3.2.
- Fix Card Tivusat.
Copyright (C) 2012 - 2018 developed by Javier Sayago (Javilonas).
NCam 1.9-r1 (official)
Changelog v1.9-r1:
- Support for CCcam 2.3.2.
- Fix Card Tivusat.
Copyright (C) 2012 - 2018 developed by Javier Sayago (Javilonas).
NCam 5.1-r1
Changelog v5.1-r1:
- Patch rewrite doublecheck logic (By Mic). - Added cw hash mode 30, 31, 32, 33, 34 for powervu. - Increased MAX ECM length. - Latest changes Oscam. |
Compiled:
ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...). ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus 'firmware no enigma2', and similar). ncam.x86 Linux PC (32 bit - i686). ncam.x86_64 Linux PC (64 bit). ncam.x86_64-syn_atom Linux x86_64 (For Synology ATOM 64 bit). ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...). ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...). ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...). ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar). ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube, TInkerboard and other similars). ncam.arm-android ARM (For Android ARM (API 24+)). ncam.arm-marvell ARM (Synology Armada 375 and similar). ncam.arm-armada37xx ARM (Synology Armada 37xx). ncam.arm-mca ARM (For Matrix CAM Air). ncam.arm-samsungtv ARM (For Samsung TV). ncam-router.mips Routers (Routers MIPSEL DD-WRT). ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx). ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx). ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx). ncam-x86_64-pc.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32). ncam-i686-pc.exe Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32). |
************************************************************ ***********************************
Ncam settings web::
Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org) user: root password: ldteam Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters. Change serverip (CCcam) 192.168.xx.xx for the ip of the receiver. Config: /var/tuxbox/config SoftCam.Key: /var/tuxbox/config SoftCam.Key Not included!! The emulator is inactive for default. |
thx Javilonas
************************************************************ ***********************************
NCam 5.2-r1 (official) 14.09.2020
Changelog v5.2-r1:
- Rework code ref gbox_maxecmsend.
- Fix sharing instability side effect.
- [powervu] Fixed emm algo.
- Fixed warning messages with high GCC 9.x.x
- Fixed warning integer constant is too large for long type.
- Add Newcamd NCam and MGcamd (Stealth mode)
- Fixed gbox module ecm debug string error.
- Add repeat to ask all gbox readers again during fallback time.
- Fixed for CAK7 Cards HD03/04/05.
Compiled: ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...). ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus 'firmware no enigma2', and similar). ncam.x86 Linux PC (32 bit - i686). ncam.x86_64 Linux PC (64 bit). ncam.x86_64-syn_atom Linux x86_64 (For Synology ATOM 64 bit). ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...). ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...). ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...). ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar). ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube, TInkerboard and other similars). ncam.arm-android ARM (For Android ARM (API 24+)). ncam.arm-marvell ARM (Synology Armada 375 and similar). ncam.arm-armada37xx ARM (Synology Armada 37xx). ncam.arm-mca ARM (For Matrix CAM Air). ncam.arm-samsungtv ARM (For Samsung TV). ncam-router.mips Routers (Routers MIPSEL DD-WRT). ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx). ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx). ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx). ncam-x86_64-pc.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32). ncam-i686-pc.exe Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32). ************************************************************ *********************************** Ncam settings web:: Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org) user: root password: ldteam Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters. Change serverip (CCcam) 192.168.xx.xx for the ip of the receiver. Config: /var/tuxbox/config SoftCam.Key: /var/tuxbox/config SoftCam.Key Not included!! The emulator is inactive for default. |
NCam 5.5-r1 (oficial).
Changes:
- Increased the limit of allowed clients.
- Fixes and optimizations in doublecheck.
- Fixes for DGcrypt and add Caid 4AB0.
- Add force ipv4 (Only viewable using IPV6).
- Increased MAX_ECM_SIZE for SECA/NAGRA/NAGRA_MERLIN.
Full Changelog:
#########################################################################
OFFICIAL version
NCam cardserver v5.5-r1, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
Copyright (C) 2012 - 2022 developed by Javier Sayago (Javilonas).
Visit https://www.lonasdigital.com/ for more details.
Source Code: https://github.com/javilonas/NCam
Mirror Source Code: https://github.com/ncam-project/NCam
Compiled:
ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus 'firmware no enigma2', and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.x86_64-syn_atom Linux x86_64 (For Synology ATOM 64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube, TInkerboard and other similars).
ncam.arm-android ARM (For Android ARM (API 24+)).
ncam.arm-marvell ARM (Synology Armada 375 and similar).
ncam.arm-armada37xx ARM (Synology Armada 37xx).
ncam.arm-mca ARM (For Matrix CAM Air).
ncam.arm-samsungtv ARM (For Samsung TV).
ncam-router.mips Routers (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam-x86_64-pc.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686-pc.exe Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
***********************************************************************************************
Ncam settings web:
Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam
Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID (Important to respect all 16 characters).
Change serverip (CCcam) 192.168.xx.xx to the ip of the receiver.
Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config
SoftCam.Key Not included!!
The emulator is inactive by default.
If you have any doubts, you can formulate it at https://www.lonasdigital.com/forumdisplay.php?f=1225
***********************************************************************************************
Changelog v5.5-r1:
- Increased the limit of allowed clients.
- Fixes and optimizations in doublecheck.
- Fixes for DGcrypt and add Caid 4AB0.
- Add force ipv4 (Only viewable using IPV6).
- Increased MAX_ECM_SIZE for SECA/NAGRA/NAGRA_MERLIN.
--------------------------------------------------------------------
--------------------------------------------------------------------
-------------
Legal warning
-------------
NCam does not emulate by default any payment signal/platform without its corresponding suscription.
You, as an end user, will be responsible for the use that you will make and neither I (Javier Sayago),
nor http://www.lonasdigital.com are responsible for what third parties can do with NCam.
--------------------------------------------------------------------
--------------------------------------------------------------------
DOWNLOAD
######################################################################### OFFICIAL version NCam cardserver v5.6-r2, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE ) Copyright (C) 2012 - 2022 developed by Javier Sayago (Javilonas). Visit https://www.lonasdigital.com/ for more details. Source Code: https://github.com/javilonas/NCam Mirror Source Code: https://github.com/ncam-project/NCam
Compiled:
ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-openpli_40 Enigma2 - Mipsel (Openpli 4.0 'Gigablue, Dream, Vu+, Xtrend, Formuler'...).
ncam.mips-uclibc Enigma2/Others - Mipsel (Tiviar Plus 'firmware no enigma2', and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.x86_64-syn_atom Linux x86_64 (For Synology ATOM 64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2/Others - ARM (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.vuplus4k_arm Enigma2 - ARM (Vu+ Zero|Uno|Duo|Solo|Ultimo 4K and similar).
ncam.james_donkey_arm Enigma2 - ARM (James Donkey DUO and similar).
ncam.arm-aarch64-dreambox Enigma2 - ARM (Dreambox ONE|TWO).
ncam.arm-dreambox Enigma2 - ARM (Dreambox DM9x0 UHD).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube, TInkerboard and other similar).
ncam.arm-android ARM (For Android ARM (API 24+)).
ncam.arm-marvell ARM (Synology Armada 375 and similar).
ncam.arm-armada37xx ARM (Synology Synology Armada 37xx and aarch64 similar).
ncam.arm-mca ARM (For Matrix CAM Air).
ncam.arm-samsungtv ARM (For Samsung TV).
ncam-router.mips Mips (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam.router-openwrt-huawei-hg556a.mips Mips (Routers openwrt Huawei HQ556a).
ncam-x86_64-pc.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686-pc.exe Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
***********************************************************************************************
Ncam settings web:
Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam
Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID (Important to respect all 16 characters).
Change serverip (CCcam) 192.168.xx.xx to the ip of the receiver.
Change extended_cw_api in ncam.conf (Use 1 for ARM (OE2.2), use 2 MPISEL (OE2.0)).
Change in ncam.conf max_time, cw_cache_size and cw_cache_memory:
max_time = 18 // The time that the ECMs are going to be ?Keep in the cache?.
cw_cache_size = 8000 // CW cache count Max storage size (Affects the CPU (don't set a value too high)).
cw_cache_memory = 16 // MBs max. memory used for CW cache size (Affects the RAM, don't set a value too high).
Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config
SoftCam.Key Not included!!
The emulator is inactive by default.
If you have any doubts, you can formulate it at https://www.lonasdigital.com/forumdisplay.php?f=1225
***********************************************************************************************
Changelog v5.6-r2: - Remove Gbox protocol. - Support CCcam 2.3.8 and 2.3.9 (Server/Client). - Fixes for Newcamd Stealth. - Add select menu Stealth mode for readers (Default NCam). - Fixes for Skip CWs cheksum for Nagra/Seca. - Some changes in dvbapi_set_section_filter for dvn. - Small change with ECM table for dvn (DVBAPI). - Update init and do ECM for reader-jet. - Update decrypt_cw_ex for StreamGuard. - Fix small BUG for readers internal/external. - Fixes for WEBIF selectd MGcamd reader (newcamd server emulate). - Added new builds for: Huawei HQ556a, Dreambox DM9x0 UHD and ONE|TWO, James Donkey DUO, Vu+ Zero|Uno|Duo|Solo|Ultimo 4K, Openpli 4.0 'Gigablue, Dream, Vu+, Xtrend, Formuler'. - Minor fixes for lower CPU/RAM consumption. - Internal adjustments for better Cache/CW CYCLE performance. - Small fix for smoother zapping with NCam protocol. - Updated sample and configuration files with a bit more detail. --------------------------------------------------------------------
-------------------------------------------------------------------- ------------- Legal warning ------------- NCam does not emulate by default any payment signal/platform without its corresponding suscription. You, as an end user, will be responsible for the use that you will make and neither I (Javier Sayago), nor www.lonasdigital.com are responsible for what third parties can do with NCam.
--------------------------------------------------------------------
--------------------------------------------------------------------
######################################################################### DONATIONS: If you want to invite me for a beer or coffee ---------------------------------------------- PayPal: https://www.paypal.me/OpenLD BTC Address: bc1qxm3w8gt7hqvw58pcq85v9mwucyqxh24lky3un2 ETH Address: 0xBF29d68b975681B7Cce484cb71aC3Ded03A71889
#########################################################################
Display More
NCam-6.0-r0 (Official)
( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
Changelog v6.0-r0:
- Fixed a small BUG with the timeout logic (ecmtimeoutlimit and ecmnotfoundlimit).
- Fix socket leaking.
- Update CW Cycle and others.
- Fix protocol webif, add others.
- Try Timeout and NOK solution.
- Clean global all emms from all readers after 30 days emm is last seen or 4 hours.
- Try kill free job data to timeout.
- Fix for protocol EMU.
- Update and more fixes.
- Fix restart.
- Fix for CW Cycle Max.
- Add new options to webif, resets readers (noks and timeouts).
- Increased Max Cycle List Entrys to 8000 Entrys.
- Increased Max Keep Cycletime to 480 min. (8 hours).
NCam-6.2-r0 (Official)
( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
Changelog v6.2-r0:
- Fix restart, logs and warnings.
- Add latest changes Oscam.
Thanks javilonas
Does it work in OpenWrt? ncam-router.mips Routers
Where is Ncam 6.3 -r.0, won't you put it here?
NCam-6.3-r0 (Official)
NCam-6.4-r4 (Official)
OFFICIAL version
NCam cardserver v6.4-r4, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
Copyright (C) 2012 - 2022 developed by Javier Sayago (Javilonas).
Visit https://www.lonasdigital.com/ for more details.
Source Code: https://github.com/javilonas/NCam
Mirror Source Code: https://github.com/ncam-project/NCam
Compiled:
ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-openpli_40 Enigma2 - Mipsel (Openpli 4.0 'Gigablue, Dream, Vu+, Xtrend, Formuler'...).
ncam.mips-uclibc Enigma2/Others - Mipsel (Tiviar Plus 'firmware no enigma2', and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.x86_64-syn_atom Linux x86_64 (For Synology ATOM 64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2/Others - ARM (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.cortexa15hf-vfp-neon Enigma2/Others - ARM (Cortex-A15 - Gigablue UHD, Vu+4K, Octagon 4k and similar).
ncam.vuplus4k_arm Enigma2 - ARM (Vu+ Zero|Uno|Duo|Solo|Ultimo 4K and similar).
ncam.james_donkey_arm Enigma2 - ARM (James Donkey DUO and similar).
ncam.arm-aarch64-dreambox Enigma2 - ARM (Dreambox ONE|TWO).
ncam.arm-dreambox Enigma2 - ARM (Dreambox DM9x0 UHD).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube, TInkerboard and other similar).
ncam.arm-android ARM (For Android ARM (API 24+)).
ncam.arm-marvell ARM (Synology Armada 375 and similar).
ncam.arm-armada37xx ARM (Synology Synology Armada 37xx and aarch64 similar).
ncam.arm-mca ARM (For Matrix CAM Air).
ncam.arm-samsungtv ARM (For Samsung TV).
ncam-router.mips Mips (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam.router-openwrt-huawei-hg556a.mips Mips (Routers openwrt Huawei HQ556a).
ncam-x86_64-pc.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686-pc.exe Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
***********************************************************************************************
Ncam settings web:
Ncam Admin Control: http://ip:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam
Important: [CCcam] Change (0-9 and A-F) NodeID (Important to respect all 16 characters).
Change extended_cw_api in ncam.conf (Use 1 for ARM/PC (OE2.2), use 2 MPISEL/PPC (OE2.0)).
Start ncam with: ncam -b
Don't include -s (it's already set internally) or other unnecessary parameters or ncam will stop.
Change in ncam.conf max_time, cw_cache_size and cw_cache_memory:
max_time = 17 // The time that the ECMs are going to be Keep in the cache.
cw_cache_size = 2700 // CW cache count Max storage size (Affects the CPU (don't set a value too high)).
cw_cache_memory = 5 // MBs max. memory used for CW cache size (Affects the RAM, don't set a value too high).
ecm_cache_size = 2700// ECM cache count Max storage size (Affects the CPU (don't set a value too high)).
ecm_cache_memory = 5// MBs max. memory used for ECM cache size (Affects the RAM, don't set a value too high).
Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config
In order for the ICAM system to work without problems, modify the settings of your enigma2 image like this.
in the Enigma settings/extras (ATV/OPENLD/OTHERS: MENU/SETTINGS/OPERATION & INTERFACE/ system settings):
Set Integrate ECM in HTTP streams to YES
Decrypt HTTP Streams YES
Decrypt received HTTP streams NO
SoftCam.Key Not included!!
The emulator is inactive by default.
One very important thing to note, official NCam does not work the same as unofficial versions and the settings are not the same.
If you have any doubts, you can formulate it at https://www.lonasdigital.com/forums/ncam.1225/
***********************************************************************************************
Changelog v6.4-r4:
- Add support iCam (Thanks to the creator @icb of the ICAM v8 patch).
- Add new KScamd protocol (still in development).
- Fixes for Stream Relay.
- Fixes for Radegast protocol and icam.
- Fixes for Viaccess and VideoGuard.
- Optimized for lower RAM and CPU consumption.
- Fixed issue preventing ICAM from starting
- Fixed issue that forced KScamd to have newcamd line active.
- Fixed the problem that modified the protocols used by users when accessing them via webif.
--------------------------------------------------------------------
--------------------------------------------------------------------
Anyone tested this new KScamd protocol (still in development) and what are the differences with other known cams ?
I am interested in how the line is entered in the server or does it go automatically
please help where i put this ncam and how whit filezilla
please help where i put this ncam and how whit filezilla
Its not an ipk, so you`ll need to have previously installed an older version that provides the necessary start script for the image softcam manager.
Take the correct file that is compatible for your receiver and replace the existing version that can be found in /usr/bin.
Permissions on the new version must be 755 and be named exactly the same as the old version or it won`t start.
NCam-6.6-r1 (Official)
- Fix bug that prevented ICam from working normally on some architectures. - Prevent ffdecsa from going through global optimization at compile time (Makes the system more stable). - Added new build for Armada 38x.
######################################################################### OFFICIAL version NCam cardserver v6.6-r1, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE ) Copyright (C) 2012 - 2022 developed by Javier Sayago (Javilonas). Visit https://www.lonasdigital.com/ for more details. Source Code: https://github.com/javilonas/NCam Mirror Source Code: https://github.com/ncam-project/NCam
Compiled:
ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-openpli_40 Enigma2 - Mipsel (Openpli 4.0 'Gigablue, Dream, Vu+, Xtrend, Formuler'...).
ncam.mips-uclibc Enigma2/Others - Mipsel (Tiviar Plus 'firmware no enigma2', and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.x86_64-syn_atom Linux x86_64 (For Synology ATOM 64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2/Others - ARM (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.cortexa15hf-vfp-neon Enigma2/Others - ARM (Cortex-A15 - Gigablue UHD, Vu+4K, Octagon 4k and similar).
ncam.vuplus4k_arm Enigma2 - ARM (Vu+ Zero|Uno|Duo|Solo|Ultimo 4K and similar).
ncam.james_donkey_arm Enigma2 - ARM (James Donkey DUO and similar).
ncam.arm-aarch64-dreambox Enigma2 - ARM (Dreambox ONE|TWO).
ncam.arm-dreambox Enigma2 - ARM (Dreambox DM9x0 UHD).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube, TInkerboard and other similar).
ncam.arm-android ARM (For Android ARM (API 24+)).
ncam.arm-marvell ARM (Synology Armada 375 and similar).
ncam.arm-armada37xx ARM (Synology Armada 37xx and aarch64 similar).
ncam.arm-armada38x ARM (Armada 38x and similar).
ncam.arm-mca ARM (For Matrix CAM Air).
ncam.arm-samsungtv ARM (For Samsung TV).
ncam-router.mips Mips (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam.router-openwrt-huawei-hg556a.mips Mips (Routers openwrt Huawei HQ556a).
ncam-x86_64-pc.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686-pc.exe Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
***********************************************************************************************
Ncam settings web:
Ncam Admin Control: http://ip:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam
Important: [CCcam] Change (0-9 and A-F) NodeID (Important to respect all 16 characters).
Change extended_cw_api in ncam.conf (Use 1 for ARM/PC (OE2.2), use 2 MPISEL/PPC (OE2.0)).
Start ncam with: ncam -b
Don't include -s (it's already set internally) or other unnecessary parameters or ncam will stop.
Change in ncam.conf max_time, cw_cache_size and cw_cache_memory:
max_time = 17 // The time that the ECMs are going to be Keep in the cache.
cw_cache_size = 2700 // CW cache count Max storage size (Affects the CPU (don't set a value too high)).
cw_cache_memory = 5 // MBs max. memory used for CW cache size (Affects the RAM, don't set a value too high).
ecm_cache_size = 2700// ECM cache count Max storage size (Affects the CPU (don't set a value too high)).
ecm_cache_memory = 5// MBs max. memory used for ECM cache size (Affects the RAM, don't set a value too high).
Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config
In order for the ICAM system to work without problems, modify the settings of your enigma2 image like this.
in the Enigma settings/extras (ATV/OPENLD/OTHERS: MENU/SETTINGS/OPERATION & INTERFACE/ system settings):
Set Integrate ECM in HTTP streams to YES
Decrypt HTTP Streams YES
Decrypt received HTTP streams NO
SoftCam.Key Not included!!
The emulator is inactive by default.
One very important thing to note, official NCam does not work the same as unofficial versions and the settings are not the same.
If you have any doubts, you can formulate it at https://www.lonasdigital.com/forums/ncam.1225/
***********************************************************************************************
Changelog v6.6-r1: - Fix bug that prevented ICam from working normally on some architectures. - Prevent ffdecsa from going through global optimization at compile time (Makes the system more stable). - Added new build for Armada 38x. --------------------------------------------------------------------
--------------------------------------------------------------------
Display More
works super
Thank you ; lonas
The original NCam works great.
Unix starttime: 1670541792
Starttime: 09.12.2022 02:23:12
Version: ncam-6.6
Revision: r1
Build: 07-12-2022
Compiler: x86_64-pc-cygwin-libusb-pcsc
Box type: generic (generic)
PID: 1779
TempDir: /cygdrive/c/Users/SSK_3/AppData/Local/Temp/_ncam
ConfigDir: \NCam\etc\tuxbox\config/
WebifPort: 8181
Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: no
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API with GXAPI support: no
DVB API with NEUTRINO support: no
DVB API read-sdt charsets: yes
DVB API with ICAM streamrelay support: yes
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: no
Monitor: no
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Emulator support: yes
Clockfix with realtime clock: yes
IPv6 support: no
Cardlist support: yes
Emulator support: yes
Built-in SoftCam.Key: yes
camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
kscamd: yes
CCcam: yes
CCcam share: yes
gbox: no
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: no
ghttp: no
Reader support: yes
Nagra: yes
Nagra Merlin: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
StreamGuard: yes
Jet: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes
cardreader_phoenix: yes
cardreader_drecas: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: yes
cardreader_smartreader: yes
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stapi5: no
cardreader_gxapi: no
cardreader_stinger: yes
Display More
Don’t have an account yet? Register yourself now and be a part of our community!