Enigma2 for KI, KII & KIII
- mtahirghauri
- Thread is marked as Resolved.
There are 796 replies in this Thread which was already clicked 195,487 times. The last Post () by @hamid1387.
-
-
-
hi this r4 is compiled by tester
install r4 K1 PLUS boot ok
tuner not detected
wlan scan detect but fail to connect if encrypted -
new r5 compiled for k1 plus
-
new r5 compiled for k1 plus
my k1 plus is older , CPU is S905 ,
It's different between mecool's s905D.
I can't load this system .....
could you help me ?
thank you .
-
new r5 compiled for k1 plus
yes,r5 make my older k1plus boot right.
cpu is s905.
but wifi fail,dvb-s also fail.
video have to choose rac cable, no hdmi connect.
So far way to go with e2 of k1plus.
however, I must thank the bliuder so much and wish perfect to k1plus in futrue...
-
Is there anyone who started the enigma 2 on the k3 pro device?
thank you -
-
Post: # 658Unread post Persian Prince
Thu Jan 31, 2019 7:30 am
Please wait for r6 as you could read announcement banner
-
Now you can download Open Vision Enigma2 images for all supported receivers from their official server:
No image
-
-
do the right think to boot from sdcard and let it + then 5 minute after shut down the box remove the sdcard power on it android systere after shut down replace sdcard and let it boot from it
-
do the right think to boot from sdcard and let it + then 5 minute after shut down the box remove the sdcard power on it android systere after shut down replace sdcard and let it boot from it
i did all that but it does not boot
-
It's freezing on MECOOL logo when I try to boot on KIII pro so I try several times with different way but I failed. I'm on stock stock ora rom Android 7.1.2 sometimes I boot on SD corelec last build
Thank you for you project I appreciated, that's will be great success when will be operated
-
Hello and how to upload openvision to K1Plus
-
Hello and how to upload openvision to K1Plus
https://openvision.tech/stb-images/k1plus/
burn it with rufus
-
Witam, nie pytam gdzie pobierać tylko jak wgrać do skrzynki.
-
Boot it with sdcard like libreelec
-
k3pro, it does not boot, stays with logo, did it work for you?
k3pro, it does not boot, stays with logo, did it work for you?
k3pro,
k3pro, it does not boot, stays with logo, did it work for you? it does not boot, stays with logo, did it work for you?
k3pro, it does not boot, stays with logo, did it work for you? -
Not yet, see please last post of POLOV
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!