DM520HD : OpenBlackHole 6++ IPTV (Original)

Is it Barry-Allen recommended or works image in flash?

Quote from emosim

This image is built to work in Flash,

Emo

Does not work in flash......

[*] Removing volume 0 from /dev/ubi0
[*] Creating volume 0 on /dev/ubi0 (dreambox-rootfs)
Set volume size to 502951936
Volume ID 0, size 3961 LEBs (502951936 bytes, 479.7 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "dreambox-rootfs", alignment 1
[*] Creating ubifs filesystem on /dev/ubi0_0
[*] Mounting '/dev/ubi0_0' to '/mnt'
[*] Extracting '/tmp/ok9iWa' to '/mnt'
[*] Mounting '/dev' to '/mnt/dev'
[*] Mounting '/proc' to '/mnt/proc'
[*] Mounting '/run' to '/mnt/run'
[*] Mounting '/sys' to '/mnt/sys'
[*] Mounting '/tmp' to '/mnt/tmp'
/usr/sbin/flash-ssbl: line 23: stat: not found
sh: bad number
Fatal: Boot image is too big
Fatal: Failed to run dreambox-secondstage.postinst
[*] Unmounting '/mnt/tmp'
[*] Unmounting '/mnt/sys'
[*] Unmounting '/mnt/run'
[*] Unmounting '/mnt/proc'
[*] Unmounting '/mnt/dev'
[*] Unmounting '/mnt'

Works as a beta with barry-allen.

Receiving only sd channels using iptv, I also have the problem with openbh on vu + solo2, therefore, using blachole 3.05 there.

Also gets a crash, using media player.

Mounting other boxes in lan also does not work but this does not work on other dream boxes that can run blackhhole and openblackhole.

good image BA with open works but this bug...

thanks

Quote from emosim

Works in Flash no problem (with some bugs that the Team is working on as Atlas35 indicated).

I installed on my DM520UHD (Flashing log doesn't mean anything, there is parts not necessary, try to flash an OpenPLi or OpenATV image on DM520HD you will have the same errors).

Emo

thank you very much to the friends who prepared the image

eliminating my favorite image mistakes that I like

I have added support information for.

Thank you..

Quote from emosim

Works in Flash no problem (with some bugs that the Team is working on as Atlas35 indicated).

I installed on my DM520UHD (Flashing log doesn't mean anything, there is parts not necessary, try to flash an OpenPLi or OpenATV image on DM520HD you will have the same errors).

Emo

With messages in flash log I did not take the chance to reboote.

But if you say it works then it's okay.

Does network mounting work to other boxes on the network? (CIFS)