Hello everyone,
i buy a new viaccess card and the card is not recognized in my dreambox dm800 hd with doscam V0.25.
Cardsystem Valid To IRD ID (nagra) Provider
n/a FF FF FF FF
Serial Rom ATR
00 00 00 00 00 00 00 00 3F 77 18 00 00 D3 8A 42 01 64 90 00
from the seller i got this information:
---------------------------------------------------
You need actual Secure-Viaccess CI module: "Smit Viaccess Secure Cam CI Modul ACS 5.0"
The provider changed to Viaccess V6 – card sharing should be stopped with this.
A sharing protection is implemented.
A module is needed.
---------------------------------------------------
in my dm800hd there is no place for a CI-module.
Normally i put the Redlight Viaccess card in the dreambox receiver and after that it take some time and activation is granted. Every year i use Redlight Viaccess Card for about 8 years, and always activate with the dreambox without any problem.
So, the module will not help me, cause it will not fit in the dreambox.
is it true that there is no sharing more possible with Reldight cards? or is the problem solved by updating to the newest oscam version to make it work.
Before i always use Redlight HD 13+ with the following working oscam config:
[reader]
label = Redlight
protocol = internal
device = /dev/sci0
pincode = 1234
caid = 0500
detect = cd
mhz = 500
ident = 0500:043800
group = 2
emmcache = 1,3,2
lb_weight = 101
do i have to change the oscam reader settings for the new card: Redlight Elite Superchic 12
maybe someone has this card working with oscam?
most important question: what can i do to make it work for cardsharing
Thx a lot for all feedback in advanced!!!
