Hi,
I really just want OScam to read and decode my activated Czech Skylink card. No sharing required.
I have an octagon sf8 running openvix and the standard version of Oscam that comes with that.
Can somebody suggest some suitable config files to achieve this?
I have tried CCcam2.3, but it keeps crashing on startup with Bus Error.
Many thanks.
Matt
Thanks. I'll take a look.
I have had some success (the card now shows 5 entitlements on the web UI) - before it was showing NO ENTITLEMENTS
However, it still isn't decoding anything. I am getting the error:
2018/09/07 15:00:16 253027A5 r (reader) horna [cryptoworks] ready for requests2018/09/07 15:00:17 00000000 s (main) init for all local cards done2018/09/07 15:00:17 00000000 s (emmcache) loaded 311 emmcache records from /tmp/.oscam/oscam.emmcache in 41 ms2018/09/07 15:00:17 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms2018/09/07 15:00:17 00000000 s (anticasc) anti cascading disabled2018/09/07 15:00:17 00B21E2C c (client) plain dvbapi-client granted (user, au=off)2018/09/07 15:00:17 00B21E2C c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache2018/09/07 15:00:17 00B21E2C c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)2018/09/07 15:00:19 00B21E2C c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0624 ECM_PID: 0474 PROVID: 000000 2018/09/07 15:00:19 00B21E2C c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0D96 ECM_PID: 0475 PROVID: 000000 2018/09/07 15:00:19 00B21E2C c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0500 ECM_PID: 0476 PROVID: 051910 2018/09/07 15:00:19 00B21E2C c (dvbapi) Demuxer 0 found 3 ECMpids and 9 STREAMpids in caPMT2018/09/07 15:00:19 00B21E2C c (dvbapi) Demuxer 0 impossible to descramble PID 0 CAID 0624 PROVID 000000 ECMPID 0474 PMTPID 044C (NO MATCHING READER)2018/09/07 15:00:19 00B21E2C c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
Sorted it. Just needed to add CAID 0624 to [reader] in oscam.server along with the other CAID.
*oscam.conf
[global]
logfile = stdout
nice = -1
[cache]
[dvbapi]
enabled = 1
au = 1
user = user
boxtype = dreambox
[monitor]
port = 988
aulow = 120
monlevel = 1
[webif]
httpport = 8888
httprefresh = 8
httpallowed = 10.0.0.0-255.255.255.255
aulow = 120
**oscam.server
[reader]
label = upper
protocol = internal
device = /dev/sci0
caid = 0624,0D96
detect = cd
mhz = 600
cardmhz = 600
force_irdeto = 1
group = 1
emmcache = 1,3,2
[reader]
label = lower
protocol = internal
device = /dev/sci1
caid = 0624,0D96
detect = cd
mhz = 600
cardmhz = 600
force_irdeto = 1
group = 1
emmcache = 1,3,2
**oscam.user
[account]
user = user
pwd = pass
uniq = 1
group = 1
au = SkyLink
caid = 0D96
monlevel = 0
**oscam.dvbapi
P: 0D96 1
I: 0D03
I: 0D0F
I: 0624
I: 0666
I can not get my card to work.
**oscam.server
[reader]
label = karta
enable = 0
protocol = internal
device = /dev/sci0
pincode = 0000
boxkey = 4FD3B1C6E406AA69
rsakey = 2598FE21A1CEF05BBC459F495FCE8F1E811B126FA8933D8DDB6480A93D43CFA7255F009E875814BECF53DA7610D675D20EEBA8A212F9079CBD1D2FAD65362B42
force_irdeto = 1
needsemmfirst = 1
detect = cd
mhz = 500
group = 1
**oscam.user
[account]
user = local
au = karta
group = 1
numusers = 1
**oscam.dvbapi
P: 0624
I: 0D96
Is that not for the ICE card?
I Check and see.
Thanks
Try with this settings
reader
label = SkylinkICE
protocol = internal
device = /dev/sci0
caid = 0D96
detect = cd
mhz = 450
cardmhz = 2700
group = 1
Hi ya ¡¡¡
[reader]
label = Skylink
protocol = mouse
device = /dev/ttyUSB1
pincode = 0000
caid = 0D96
detect = cd
mhz = 600
group = 2
emmcache = 1,3,2,0
blockemm-unknown = 1
cccreshare = 2
audisabled = 1
I run this ice card on CW not Irdeto.
Change Protocol and device if you are not using an easymouse.
Regards
ICE = Irdeto + Cryptoworks
Here is the simplest configuration files for Skylink in IRDETO mode:
oscam.conf :
[global]
[dvbapi]
enabled = 1
au = 1
user = internal_user
[webif]
httpport = 8888
httprefresh = 8
httppollrefresh = 10
httpallowed = 127.0.0.1,10.0.0.0-10.255.255.255,192.168.0.0-192.168.255.255oscam.user :
oscam.server :
[reader]
label = reader_sci0
protocol = internal
device = /dev/sci0
detect = cd
caid = 0624
boxkey = A1C6F3D8B5E1F2C1
rsakey = 79EA25A763DA2C3E02B456A13962E60BCE63E628A2C177BE951CED96A9C6131A146F98D5867B7AE6682324FD6481913C0241F065C8D3457E54BB59B7B5DE0362
force_irdeto = 1
needsemmfirst = 1
needsglobalfirst = 1
autospeed = 0
mhz = 600
cardmhz = 600
group = 1oscam.dvbapi :
Delete all unnecessary config-files from the Oscam configuration directory.
Unfortunately, the Cryptoworks mode in the case of the Skylink provider is gradually being discontinued:
box id rsa id error
not reader in oscam
norbi20 :
Which set-top box (brand, model) ?
Which version of Oscam ?
How does Webif's Live-LOG look after Oscam restart ?
You probably have a badly copied rsakey (not a whole text from code above). Boxkey and rsakey must consolidate together. It's nothing else. Try it again please.
You can to try also the following pair:
Hi
Does the Irdeto m7 (Not the ICE) card work in Oscam?
I think yes. However, sharing a satellite card with Viaccess (so-called "M7") will probably not work. Also, I don't know if the new Viaccess cards work also in UNI reader or if it is necessary to use CAM module (module inserted in CI+ interface and there is also satellite card in the module). However, Oscam supports Viaccess mode.
Oh, sorry. You thought the new commercial name cards with the crypto mode Irdeto - "Skylink Standard HD M7 IRDETO". This is probably only IRDETO.
This should theoretically work in Oscam. However, the problem may be UNI readers because there may be UNI block firmware on the card.
Unfortunately I will not advise you. I do not know. I don't use it.
The original Skylink cards were written in 2013 that they will not work in UNI readers and will only be usable in CAM modules embedded in the CI+ interface. However, later, the reflections were already working in UNI readers. So your question is hard.
Thanks loads s3n0 ¡
Its hard coz the card is paired?
Please let me know if there is a work around?
I would love to get my irdeto skylink card working but the card hasn't started correctly
Hi. What does it mean: "hasn't started correctly" ? Oscam LOG ? Can you also attach some Oscam Webif -> Live LOG ?
Don’t have an account yet? Register yourself now and be a part of our community!
