stalker portal on enigma2

There are 473 replies in this Thread which was already clicked 175,124 times. The last Post () by biko.

    Quote from kashmir

    Hello, I can't get this plugin to work, on my Octagon sf8008, I followed Kiddac's info from the post "274,

    but the mac address at the top does not change and I put 3 lines in stalkerconfig that appear, but nothing works although I have tested it before .... understand nothing .....

    I had no luck either with my sf8008. I used the amended plugin.py file, and it changed the Mac in etc/enigma2/hwmac, but not in the stalker setup itself. I know someone with a zgemma h7, and it worked, but not with the sf8008.

    I just installed teamblue 6.4 on my sf8008. It has a modded version of stalker in the image, authored by ziko. I think it is the gigablue version. It allows you to change the mac on the portals. The portals load fine, as do the channel lists, epg, etc.. but no video. It must be a driver issue. I am busy with work, but I will test more when I have time.

    You enter your portals into home/stalker.conf like so:

    portal 0 http:xxxx.com:port/c/?mac=00:1a:79:xx:xx:xx

    When i lanced stalker, i have this one on screen....lol...

    Your stb is blocked call the provider

    I installed teamblue 6.5 on slot 4, and got Ziko's Stalker working on my sf8008. It changes Macs and everything plays. It seems like this version of stalker is only 720p though. Add your portals to home/stalker.conf and then load them using the blue button on your remote.

    Unfortunately, this image does not exist for the sf8008mini, I will try to find the Ziko version stalker plugin, thank you friend .....

    Edited once, last by kashmir ().

    Like 1

    It works almost perfect on pure2 6.5. it changes the Macs in openpli 8.0, but won't load any portals. It works on vix 5.4, but everytime you change the mac, the GUI reboots. I replaced the plugin.py and stalker py in those images with the py's from the Ziko's teamblue 6.5 stalker, and it worked. I deleted the portal.stalkerconfig from the HDD and renamed it stalker.conf. I imputed in home/stalker.conf. it works super on openatv 6.4 and Pure2 6.5.

    Quote from johnnylarue167

    I installed teamblue 6.5 on slot 4, and got Ziko's Stalker working on my sf8008. It changes Macs and everything plays. It seems like this version of stalker is only 720p though. Add your portals to home/stalker.conf and then load them using the blue button on your remote.

    Hi friend, by renaming the files, I managed to install Teamblue sf8008 on my sf8008mini and indeed Stalker works fine, thank you very much for your help ....

    I will now test your installation on Openatv, but thank you very much, it works great ....

    Test with Openatv 6.4, same installation as Teamblue, but stalker does not start ..... I will test Openeight ....

    Quote from kashmir

    Test with Openatv 6.4, same installation as Teamblue, but stalker does not start ..... I will test Openeight ....

    I have tried in it on 5 images.

    For me, it works almost perfectly on pure2 6.5 & Openatv 6.4. It works well on the teamblue image. On openvix 5.4, the only problem is the GUI rebooting when you change a mac. The portals play well. On openpli 8.0, the portals won't load, but the Macs change with no problem.

    On Openatv 6.4 when I launch / usr / bin / stalker in telnet, a lot of libraries are missing and on openeight, it does not work either, I wonder how you did with Openatv ....

    Edited once, last by kashmir ().

    The first thing I would do is delete stalker from openatv, reboot, then install a fresh version from the feeds.

    Next, download then unpack the stalker.rar that Thundere uploaded above to your desktop.

    Open up the ftp program you use. I use winscp. Move the stalker folder from your desktop and put it in usr/lib/enigma2/python/plugins/extensions folder. The py files in the original stalker folder will be overwritten.

    Drop your portals file(stalker.conf)

    Into /home/ .

    Reboot your receiver.

    Open up the stalker config on your unit.

    Click the blue button to load the portals from stalker.conf.

    Click on the portal you want.

    Wait for the mac to change.

    Exit the stalker config.

    Enter stalker config again. Your mac should have changed.

    Click on that portal again, then hit save.

    Click on stalker.

    It should work perfect on openatv.

    No bugs that I have seen.

    Good luck Sir.

    Thank's a lot my dear, i see tomorrow with your tuto.....see you....

    Vu Duo 4K SE

    Uclan Ustym 4k Pro


    :GMlinuxsat1:

    Like 2

    Hello everyone, finally I can only get Teamblue to work with stalker, all the other images tested impossible, the installation goes well, but when launching Stalker, it is nowhere, not found ... ..and yet I observed the installation in the Teamblue image, I do the same thing again, I follow your tutorial, the friend in case and nothing, no stalker .....

    Quote from johnnylarue167

    It works almost perfect on pure2 6.5. it changes the Macs in openpli 8.0, but won't load any portals. It works on vix 5.4, but everytime you change the mac, the GUI reboots. I replaced the plugin.py and stalker py in those images with the py's from the Ziko's teamblue 6.5 stalker, and it worked. I deleted the portal.stalkerconfig from the HDD and renamed it stalker.conf. I imputed in home/stalker.conf. it works super on openatv 6.4 and Pure2 6.5.

    dear johnnylarue167

    can you please give the stalker plug in complete rar for pure 2 6.5


    thx.

    Tested with the latest Openspa image and it works flawlessly ....

    Quote from hadock
    Quote from johnnylarue167

    It works almost perfect on pure2 6.5. it changes the Macs in openpli 8.0, but won't load any portals. It works on vix 5.4, but everytime you change the mac, the GUI reboots. I replaced the plugin.py and stalker py in those images with the py's from the Ziko's teamblue 6.5 stalker, and it worked. I deleted the portal.stalkerconfig from the HDD and renamed it stalker.conf. I imputed in home/stalker.conf. it works super on openatv 6.4 and Pure2 6.5.

    dear johnnylarue167

    can you please give the stalker plug in complete rar for pure 2 6.5


    thx.

    Here is the version that I extracted from Teamblue 6.5 and which works ....stalker zigo.rar

Your hub for IPTV & streaming support.

Get help with Android apps, Smart TV setup, m3u playlists, channel lists, and finding reliable live streaming websites. Master IPTV streaming on all devices. Find downloads, setup tutorials, and community support for apps, Smart TVs, and m3u channel lists.