Discovery 1° West Powervu not working

karlnapf · Oct 17th 2018

I'm trying different channels in powervu, biss etc (keys from softcam.keys) on different satellites.

Im using actual oscamemu 11434 and with biss channels it's working.

But I don't get any powervu-channel clear.

receiver: Octagon SF 4008, Opennfr-image.

Satellit: 1 ° West, 12303 V , many discovery-channels in powervu.

oscam-log sys: key found, and Controlwords cw0 and cw1 are calculated. That should mean, that the key is correct, or ?

But there is no picture. I read somewhere, that cacheex is necessary. but i don't know ho to use.

at 4.8° East i've tried f.i. Coral TV at 12149H, but log sys "key P0014 00" not found ( though there is a key in softcam.keys)

should this channel work, with korrekt key?

or Discovery at 12322 V ?

my Problem is: in keyfiles there are many channels, but i don't know, if they are really openable or if i have simply an error in my config.

Can anybody tell me some powervu-channels (sat is not important, i habe a motorized dish 60° O - 45° W)) which is working at the moment with korrekt keys ?

eventually with the configs (oscam.conf, oscam.server..) ?

thanks Karl

**t72andrey** · Oct 17th 2018

use last softcam from here

SoftCam by Serjoga

Try any discovery or animal from 4.9E - all are working now. If not opening, check up configs.

karlnapf · Oct 17th 2018

thank you, I`ll try.

at the moment i had a little succcess with afn at 9° East, working now. I had to put cachex=1 in config

Discovery 1° West still not working, though keys are korrect. Oscam log shows cw 00 and cw01, but no picture

karlnapf · Oct 21st 2018

I got afn at 9° East working. But no luck at discovery at 1° West and 4.8 ° East, though log says: descrambled (keys are ok). are there special settings in oscam.server ?

my oscam.server:

[reader]

label = emulator_disc

protocol = emu

device = emulator

group = 1

#

cacheex = 1

cacheex_maxhop = 1

cacheex_allow_request = 1

#

emmcache = 2,1,2,0

saveemm-unknown = 1

saveemm-u = 1

saveemm-s = 1

saveemm-g = 1

emu_auproviders = 0E00:000000

psk31 · Oct 21st 2018

Quote from karlnapf

I got afn at 9° East working. But no luck at discovery at 1° West and 4.8 ° East, though log says: descrambled (keys are ok). are there special settings in oscam.server ?

my oscam.server:

[reader]

label = emulator_disc

protocol = emu

device = emulator

group = 1

#

cacheex = 1

cacheex_maxhop = 1

cacheex_allow_request = 1

#

emmcache = 2,1,2,0

saveemm-unknown = 1

saveemm-u = 1

saveemm-s = 1

saveemm-g = 1

emu_auproviders = 0E00:000000

Display More

[reader]

label = ocam_emu

protocol = emu

device = Emulator

caid = 0D00&0F00,090F,0500,1801,0604,0648,0D98,0650,0D95,0E00,1FFF,1010,2600,4AE1,FFFF

detect = cd

ident = 0E00:000000,000002;0D00:000000,000004,000010,000014,000020,0000C0,000000,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000004,000010;090F:000000;0500:030B00,023800,007400,007800;1801:000000;0604:000000;0D98:000000;0650:000000;0D95:000000;4AE1:000011;FFFF:000000;1010:000000

group = 1

emmcache = 1,5,31,1

emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

auprovid = 000E00

services = !afn

[reader]

label = AFN

description = AFN-EMU

protocol = emu

device = Emulator

caid = 0E00

detect = cd

group = 1

emmcache = 1,5,31,1

emu_auproviders = 0E00:000000

auprovid = 000E00

cacheex = 1

cacheex_maxhop = 1

cacheex_allow_request = 1

services = afn

paste that into the oscam.server and copy it done

linuxyoung · Oct 27th 2018

I know that even this should be:

oscam.services:

[afn]

caid = 0E00

provid = 000000

srvid = 0066,0067,0068,0069,006A,006B,006C,006D

maximus66 · Oct 28th 2018

Quote from psk31

caid = 0D00&0F00,090F,0500,1801,0604,0648,0D98,0650,0D95,0E00,1FFF,1010,2600,4AE1,FFFF

0D00=old DT caid,not work.

0F00=fake caid

090F=old Viasat caid,

1801=old,

0604=100% Im sure that this not work,

0648=new non working on emu caid Orf,

0D95=same like above,

0650=same like 0648 and 0D95,not work on emu.

4ae1=is Tricolor not have signal on 36°E,probably not work.

all of this above just simlpe delete,

so, you need only this:

ident = 2600:000000;FFFF:000000;0E00:000000;1010:000000;0500:021110

Caid 0500:021110 is only one channel on HB 13°E Mezzo.

Btw. for youre question,all Discovery channels on Thor 0,8°W and Astra 4,8°E works fine with correct SoftCam.Key

Regards

karlnapf · Oct 29th 2018

i see in OSCAM-Log, that descrambling works, even AU is ok (keys are written). but i get no picture, no sound.

**georgeflu** · Oct 29th 2018

your receiver (Octagon SF 4008 ) can't descramble direct powervu channels in 1W and 5E, but only afn in 9E ...

for the other channels you need the stream relay function...

karlnapf · Oct 31st 2018

georgeflu: ok, i understand. I' ve changed everything like described in tutorial for "powervu with streamrelay" here How to watch powervu with stream relay enabled |detail tutorial|, but i can't get a picture, though i see in Log, that key is found and descrambled. somethings going wrong, maybe stream_ecm_delay value ?

**Antepenultim8** · Oct 31st 2018

2653dea15fd930.jpglook at the pid of the service

and make sure you have the key to that service

i just looked at mine

P 0008044D 00 ************** ;Discovery Central Europe HD, 1W, 12303

P 0008044D 01 ************** ;Discovery Central Europe HD, 1W, 12303

was missing

if you ask and it cant find it wont work

maximus66 · Nov 1st 2018

Quote from karlnapf

i see in OSCAM-Log, that descrambling works, even AU is ok (keys are written). but i get no picture, no sound.

Change oscam version, try them more.

Also, tell me what you have in oscam.dvbapi and API for extended CWs?

I dont have Octagon, but on my zero 4k this channels works just fine...of course without stream relay.

Discovery 1° West Powervu not working

OSCam-EMU Support Forum

Participate now!

Share