and i am still asking, what is the reason, to use an external cam manager???
More effortless than built-in apps.
I install as a package including the softcam.keys required. Oscam runs both local keys and ccam lines.
and i am still asking, what is the reason, to use an external cam manager???
More effortless than built-in apps.
I install as a package including the softcam.keys required. Oscam runs both local keys and ccam lines.
Use an image with the date 20200408 or later. A new core and drivers have been added to the software, where receivers flash. divided into 4 sections, so you don't need an SD card to use multi-loading.
Due to changes that exist but will also be made to your device, you need to install the software from scratch using a USB flash drive (not via an internal installer).
For those who don't remember, download the software (full version, not multi-download), unpack it, and transfer the contents to a fat32-formatted USB memory card. (you should have 4 .bin files inside).
Turn off the power to the receiver and plug the USB flash drive into the USB 3.0 port, press the standby button on the receiver and turn on the power switch (hold until "update"appears).
On the display that appears, select "flash Programming", once the process is complete, you can restore the channel settings, re-add extensions, and so on.
Now you have 3 more slots to install the image of your choice ...
The multi-loading mode is the same for most receivers on the market (for example, edision, zgemma, etc.) But it is new / changed for the sf8008. In practice, this means that the software of other teams is not currently compatible, but this will happen soon when other teams update to a new type of multiload.
Display MoreSatDreamGr 8 image for octagon sf8008 with multiboot support
Use an image with the date 20200408 or later. A new core and drivers have been added to the software, where receivers flash. divided into 4 sections, so you don't need an SD card to use multi-loading.
Due to changes that exist but will also be made to your device, you need to install the software from scratch using a USB flash drive (not via an internal installer).
For those who don't remember, download the software (full version, not multi-download), unpack it, and transfer the contents to a fat32-formatted USB memory card. (you should have 4 .bin files inside).
Turn off the power to the receiver and plug the USB flash drive into the USB 3.0 port, press the standby button on the receiver and turn on the power switch (hold until "update"appears).
On the display that appears, select "flash Programming", once the process is complete, you can restore the channel settings, re-add extensions, and so on.
Now you have 3 more slots to install the image of your choice ...
The multi-loading mode is the same for most receivers on the market (for example, edision, zgemma, etc.) But it is new / changed for the sf8008. In practice, this means that the software of other teams is not currently compatible, but this will happen soon when other teams update to a new type of multiload.
Hello. I installed the new image on multiboot from scratch. By doing a green button with the remote, we delete the plugins that are installed by pressing the Red button. However, here we see that more installed plugins are not among the installed plugins. How can I activate these plugins.
Display MoreDisplay MoreSatDreamGr 8 image for octagon sf8008 with multiboot support
Use an image with the date 20200408 or later. A new core and drivers have been added to the software, where receivers flash. divided into 4 sections, so you don't need an SD card to use multi-loading.
Due to changes that exist but will also be made to your device, you need to install the software from scratch using a USB flash drive (not via an internal installer).
For those who don't remember, download the software (full version, not multi-download), unpack it, and transfer the contents to a fat32-formatted USB memory card. (you should have 4 .bin files inside).
Turn off the power to the receiver and plug the USB flash drive into the USB 3.0 port, press the standby button on the receiver and turn on the power switch (hold until "update"appears).
On the display that appears, select "flash Programming", once the process is complete, you can restore the channel settings, re-add extensions, and so on.
Now you have 3 more slots to install the image of your choice ...
The multi-loading mode is the same for most receivers on the market (for example, edision, zgemma, etc.) But it is new / changed for the sf8008. In practice, this means that the software of other teams is not currently compatible, but this will happen soon when other teams update to a new type of multiload.
Hello. I installed the new image on multiboot from scratch. By doing a green button with the remote, we delete the plugins that are installed by pressing the Red button. However, here we see that more installed plugins are not among the installed plugins. How can I activate these plugins.
hi
install plugin MountManager Download it from the attachments
After installation, reboot E2
Now Démonter all partition SD card ( sda1;sda2;sda3;sda4) as in the picture
I downloaded this version Satdreamgr-6-sf8008-20200405, I can install it in multibootis version Satdreamgr-6-sf8008-20200405, I can install it in multiboot,
It only has the Octagon folder and usb_update.bin
Display MoreDisplay MoreSatDreamGr 8 image for octagon sf8008 with multiboot support
Use an image with the date 20200408 or later. A new core and drivers have been added to the software, where receivers flash. divided into 4 sections, so you don't need an SD card to use multi-loading.
Due to changes that exist but will also be made to your device, you need to install the software from scratch using a USB flash drive (not via an internal installer).
For those who don't remember, download the software (full version, not multi-download), unpack it, and transfer the contents to a fat32-formatted USB memory card. (you should have 4 .bin files inside).
Turn off the power to the receiver and plug the USB flash drive into the USB 3.0 port, press the standby button on the receiver and turn on the power switch (hold until "update"appears).
On the display that appears, select "flash Programming", once the process is complete, you can restore the channel settings, re-add extensions, and so on.
Now you have 3 more slots to install the image of your choice ...
The multi-loading mode is the same for most receivers on the market (for example, edision, zgemma, etc.) But it is new / changed for the sf8008. In practice, this means that the software of other teams is not currently compatible, but this will happen soon when other teams update to a new type of multiload.
Hello. I installed the new image on multiboot from scratch. By doing a green button with the remote, we delete the plugins that are installed by pressing the Red button. However, here we see that more installed plugins are not among the installed plugins. How can I activate these plugins.
looks that you restored settings (and maybe from another image?) , and it tried to download more plugins?
because in your screens, i can see plugins that they are not installed from default (cutlist editor 6.4 , dvd player, dreamexplorer etc...)
also,there are a few other of them, which they are installed , but it does not shows them in "plugins" (green button) ,as "autobackup" , which you can find in menu/setup...
try once to do a total clear installation, and you will see that the most of them will not appear by default (you can download manual most of them if you need them).
I downloaded this version Satdreamgr-6-sf8008-20200405, I can install it in multibootis version Satdreamgr-6-sf8008-20200405, I can install it in multiboot,
It only has the Octagon folder and usb_update.bin
which way are you trying to install it?
which image are you using in the flash?
and it is known , that even if it says "multiboot" version, it is equal to the old system, and not common finaly to other base images...
by the other side... you can use the above refered SDG8 "20200408 or later" , which uses the new (for sf8008) multiboot. but even for that,for the moment, you can use only this image ( in 4 different partitions). soon all the other teams will upgrade to this multiboot, and will be compatibility between all ...
The guys need to put the image of the flash drive as the main one, because these innovations are currently used only by 2 teams (SatDreamGr 8 and PKT-7.1) and one developer Fox Bob in their builds..
Display MoreI downloaded this version Satdreamgr-6-sf8008-20200405, I can install it in multibootis version Satdreamgr-6-sf8008-20200405, I can install it in multiboot,
It only has the Octagon folder and usb_update.bin
which way are you trying to install it?
which image are you using in the flash?
and it is known , that even if it says "multiboot" version, it is equal to the old system, and not common finaly to other base images...
by the other side... you can use the above refered SDG8 "20200408 or later" , which uses the new (for sf8008) multiboot. but even for that,for the moment, you can use only this image ( in 4 different partitions). soon all the other teams will upgrade to this multiboot, and will be compatibility between in flash I installed Openatv 6.3all ...
Display MoreI downloaded this version Satdreamgr-6-sf8008-20200405, I can install it in multibootis version Satdreamgr-6-sf8008-20200405, I can install it in multiboot,
It only has the Octagon folder and usb_update.bin
which way are you trying to install it?
which image are you using in the flash?
and it is known , that even if it says "multiboot" version, it is equal to the old system, and not common finaly to other base images...
by the other side... you can use the above refered SDG8 "20200408 or later" , which uses the new (for sf8008) multiboot. but even for that,for the moment, you can use only this image ( in 4 different partitions). soon all the other teams will upgrade to this multiboot, and will be compatibility between all …
in flash I installed Openatv 6.3
hi georgeflu
The problem is caused by images installed on the sd card where PlugIns from other images (sections on MicroSD) appear in a list PlugIns installed
I am installed SDG8 20200408 in flash When rebooting the device
When entering the list of deleted PlugIns note the image
After Démonter all partition SD card as in the picture
Now there is no overlap
The guys need to put the image of the flash drive as the main one, because these innovations are currently used only by 2 teams (SatDreamGr 8 and PKT-7.1) and one developer Fox Bob in their builds..
ATV 6.4 also released an image with a New multiboot and recovery
you can set it as the main image
I wish you all good luck !!!
Display Morehi georgeflu
The problem is caused by images installed on the sd card where PlugIns from other images (sections on MicroSD) appear in a list PlugIns installed
I am installed SDG8 20200408 in flash When rebooting the device
When entering the list of deleted PlugIns note the image
After Démonter all partition SD card as in the picture
Now there is no overlap
When using new images the sd card is not used
When using new images the sd card is not used
new multiboot support for develp branch, 4 slot for emmc flash and 2 slot for SD card
Don’t have an account yet? Register yourself now and be a part of our community!