NeoBoot Enigma2 Plugin by gutosi

There are 516 replies in this Thread which was already clicked 169,690 times. The last Post () by hitreek.

    I don't think it's a mounting problem because with the same installation procedure on the Octagon sf8008 everything works fine (see pic.3).


    1.jpg   2.jpg   3.jpg



    I'm using the non-VIP new version 9.78 to see if it actually works on osmio4kplus, but I get the same result as I had on older versions.

    In version 9.65 I didn't get anything even if I mounted the HDD as UUID.


    4.jpg   5.jpg

    I used a new empty USB-Drive, formatted as ext4, mounted as UUID, but the result was the same.

    NeoBoot does not work on Edision osmio4kplus.


    FYI, Edision osmio4kplus does not accept any other multiboot plugins (OpenMultiBoot, EgamiBoot, OPDBoot, NFR4XBoot) while Octagon sf8008 accepts all of them.

    I have Edision Os Mio 4K openpli 9 NeoBoot works everything OK. After reboot the pendrive is mounted and there is a choice of image


    initialize the pendrive on the PC or use the console command:

    #mkfs.ext3 /dev/sdx1


    convert from ext3 to ext4

    #tune2fs -O extents,uninit_bg,dir_index /dev/sdx1


    correctly sdx1 - sdx1 is an example


    send ssh or telnet command : blkid

    to see the disk uuid


    Give a label and uuid for the pendrive. Add to the fstab file in /etc manually UUID, example:


    Code
    rootfs               /                    auto       defaults              1  1
proc                 /proc                proc       defaults              0  0
devpts               /dev/pts             devpts     mode=0620,gid=5       0  0
tmpfs                /run                 tmpfs      mode=0755,nodev,nosuid,strictatime 0  0
tmpfs                /var/volatile        tmpfs      defaults              0  0
UUID=7xxxxx-f15e-8a47-xxxx-xxx81xxx /media/hdd auto defaults 0 0



    -

    instead of the number 7xxxxx-f15e-8a47-xxxx-xxx81xxx from the blkid command use the uuid number


    reboot system


    try it, maybe it will work

    Strange, why doesn't it work on me? I have the osmio4kplus which should be like osmio4k.

    I'll try again tomorrow when I have enough time to experiment.


    This is the content of the fstab file with USB-drive connected.

    Code
    /dev/mmcblk1p1          /boot            auto            defaults                              1  1
rootfs                  /                auto            defaults                              1  1
proc                    /proc            proc            defaults                              0  0
devpts                  /dev/pts         devpts          mode=0620,gid=5                       0  0
tmpfs                   /run             tmpfs           mode=0755,nodev,nosuid,strictatime    0  0
tmpfs                   /var/volatile    tmpfs           defaults                              0  0
/dev/mmcblk1p10         none             swap            defaults                              0  0
UUID=b79c2408-10ad-45e1-9425-44b5bf55146e        /media/hdd      auto    defaults        0 0

    Should I remove the first row?

    I removed the first row from fstab, but the result is the same.


    Here is the result of "blkid" command:


    Anyway, I'll try again tomorrow.

    Edited once, last by giorbak ().

    Quote from giorbak

    I used a new empty USB-Drive, formatted as ext4, mounted as UUID, but the result was the same.

    NeoBoot does not work on Edision osmio4kplus.


    FYI, Edision osmio4kplus does not accept any other multiboot plugins (OpenMultiBoot, EgamiBoot, OPDBoot, NFR4XBoot) while Octagon sf8008 accepts all of them.

    Hi Gio, which sf8008 image accept openmultiboot??... openatv does not have it

    I had read in the past that someone had installed OpenMultiBoot on the sf8008.

    Personally, I have never tried this plugin on this box.


    I tried it now on OpenEight which is py2, but although the plugin was installed, it failed because it can't install kernel-module-nandsim.


    1.jpg   2.jpg   3.jpg



    When I have time, I will try it on an older OpenATV version.

    Here we are talking about Neoboot and not openmultiboot... you are using the wrong plugin

    Vu Duo 4K SE

    Uclan Ustym 4k Pro


    :GMlinuxsat1:

    Edited 2 times, last by Saraceno84 ().

Your hub for Enigma2 MultiBoot plugins

Find downloads, guides, and support for the latest tools to manage, boot, and organize multiple system images. Discover essential Enigma2 MultiBoot plugins. Access downloads and support for dual-boot and multi-image management tools.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login