master G ciao,
I ask because that and the exact path but in usr/bin there the folder Camff1a22403bb7.jpg
There are 837 replies in this Thread which was already clicked 75,102 times. The last Post () by electron112.
master G ciao,
I ask because that and the exact path but in usr/bin there the folder Camff1a22403bb7.jpg
If there is no Cam directory create one.
With FileZilla go to /usr/bin > right click > create directory - Cam > right click on Cam directory > File permissions > Change file attributes to 755
Or install it from PurE2 Plugins and it will be created... ;)
I don't use Ncam, m8. OSCam Emu is all one needs... :)
OKI, new drivers for H9 series and - YEAY, now it is working much better (if not perfectly)!!! :) Tested in H9S tonight...
Fresh image, still hot, under the hammer... :) Set it up in Flash only, nothing downloaded except sat TV channel list and Kodi!
KODI TEST - streaming and playback
Streaming worked! Live TV Serbia finally worked well! It is all behaving pretty well, fast and solid with Live TV and films!
I played a film from my NAS (NFS) (Sherlock H. 2011)... going well! (Btw, from my laptop (CIFS) - nothing worked... Dunno why yet)...
However, anyone having issues with subtitles? If one changes A-V settings during the film and saves those as default - it is not saved. When you come back again for another film - you must do it again.
One chooses a subtitle from a folder and it is not playing. Download them - it is not playing. I tried many, many!
When one downloads subtitles the film is in pause mode, not moving. Must press play/pause button once or twice to start the film again. Then, EXIT button to "lose" the graphics.
DVDs
Collins in Paris DVD is going but probs with menu (no video). Press NEXT CHAPTER and it starts, both video and audio. Choppy sound, sync issues here and there but it is going! Better! I press STOP button and exit but the DVD is going on, until I choose something else to play... All DVDs I tested are like that. Menu must be fixed and commands are "not respected". But it is going! We are getting somewhere!
Paco de Lucia's DVDs were playing!!! Very cool!
Bebe Mais DVD: both A & V worked and chapter seeking worked in it, like WTE said!
It's a bit haphazard, some work, some don't but there is a considerable improvement now!
Other videos are generally OK, all sorts of formats, going pretty well! Some do not give me video but I suppose any kind of crazy codecs are out there...
Strangely, the whole Babylon 5 series and films are without video, only audio...Luckily, I have 2 different copies of it, so mkv's worked... Sorry, it is too late to start checking codecs one by one...
A film and a concert recorded from satellite a few years back, in .ts format also did not work... But the newer recordings in the same format - did work well!
In conclusion of this part...
It seems new drivers and whatever else they did - is working! Much better now!
Exit from Kodi > black screen, must restart E2... No go! Full Restart > then it works... Another bug?
Now, I turned to "Script to move it all to mSD card"...
I shall continue tomorrow, with playback using the internal player... :)
(Finally, a breakthrough!!! YES!!! :rasta2bigsmoke0gf1::thumbup:
Hi, FrancHR
can PurE2 team add Delete option next to Load/Save in EPG menu like the other open-E2 images
While we wait for Franc, maybe this will work to delete your EPG file: first install Dream-Explorer plugin from Plugins > Extensions.
The: MENU > Plugins > Dream-Explorer > (I direct/put EPG to USB stick) navigate to epg.dat file > red button (delete)... ;)
While we wait for Franc, maybe this will work to delete your EPG file: first install Dream-Explorer plugin from Plugins > Extensions.
The: MENU > Plugins > Dream-Explorer > (I direct/put EPG to USB stick) navigate to epg.dat file > red button (delete)... ;)
I try it does not work but there other way but also hard work by using Telnet entering command
init 4
deleting epg.dat from /media/hdd/
entering commands
init 3
and Save epg.dat to /media/hdd/
but like I said before it really hard work for just deleting one file
Luminx, what happens when you are in Dream-explorer plugin and you navigate to epg.dat, then you go to it/chose it and press the red button?
Why is it not working? This is how I delete files I no longer need and it does work, generally speaking...
Unless one must stop E2 first, to delete epg.dat, as it may be in use...
In that case, switch off STB, enter it via FTP (FileZIlla) and delete it...
Hi folks , I'm having an issue on pure2 where all my plugins are storing to flash and on my plugins page it's showing 87mb , I have a 1tb hdd mounted , I've tried turning automount on and off and tried mounting a second storage device but plugins are still saving to flash. Any help is appreciated
Open a new thread, m8 - and give us lots of relevant info, much, much more than now... ;)
yeah maybe switch off from remote the easy way but still I wish PurE2 team could add Delete function in EPG menu
I mean even BlackHole add it to their close source image
New PurE2 update (via SW update) brings updated oscam-emu and latest OSCam Emu: another hash mode is now supported!
Display MoreWhile we wait for Franc, maybe this will work to delete your EPG file: first install Dream-Explorer plugin from Plugins > Extensions.
The: MENU > Plugins > Dream-Explorer > (I direct/put EPG to USB stick) navigate to epg.dat file > red button (delete)... ;)
I try it does not work but there other way but also hard work by using Telnet entering command
init 4
deleting epg.dat from /media/hdd/
entering commands
init 3
and Save epg.dat to /media/hdd/
but like I said before it really hard work for just deleting one file
I asked about adding and didn't get a reply even showed them the commits other images use, sadly with it being closed source with githup not updated I couldnt make a pull request.
After online SW update, please go to MENU > Plugins > Estuary config and press GREEN button to confirm/reactivate your settings for the default PurE2 skin, Estuary.
After restart your old skin settings should be back... :) I just asked Franc about the behaviour and he said it is normal, so one must do that after the SW update...
For AVCHD (Sony/Panasonic *.mts) from telnet or whatever favorite way:
opkg install gstreamer1.0-libav
In H9S:
root@zgemmah9s:~# opkg install gstreamer1.0-libav
Package gstreamer1.0-libav (1.14.4+git2193+5031141-r0) installed in root is up to date.
Crash again:
13:50:39.3186 [ ] dvb/cahandler.cpp:333 unregisterService [eDVBCAService] free slot 0 demux 0 for service 1:0:1:387:4E84:16E:A00000:0:0:0:
13:50:39.3186 [ ] dvb/cahandler.cpp:497 ~eDVBCAService [eDVBCAService] free service 1:0:1:387:4E84:16E:A00000:0:0:0:
13:50:39.3265 [ ] service/servicedvb.cpp:1743 timeshift [eDVBServicePlay] timeshift
13:50:39.3268 [ ] service/servicedvb.cpp:1743 timeshift [eDVBServicePlay] timeshift
13:50:39.3275 [ ] dvb/decoder.cpp:870 setState [eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
13:50:39.3275 < > dvb/decoder.cpp:762 stop [eDVBPCR0] DEMUX_STOP ok
13:50:39.3276 [ ] dvb/decoder.cpp:773 ~eDVBPCR [eDVBPCR0] destroy
13:50:39.3276 < > dvb/decoder.cpp:431 stop [eDVBVideo0] DEMUX_STOP ok
13:50:39.3276 < > dvb/decoder.cpp:440 stop [eDVBVideo0] VIDEO_STOP ok
13:50:39.3278 [ ] dvb/decoder.cpp:532 ~eDVBVideo [eDVBVideo0] destroy
13:50:39.3278 < > dvb/decoder.cpp:163 stop [eDVBAudio0] AUDIO_STOP ok
13:50:39.3279 < > dvb/decoder.cpp:171 stop [eDVBAudio0] DEMUX_STOP ok
13:50:39.3279 < > dvb/decoder.cpp:207 unfreeze [eDVBAudio0] AUDIO_CONTINUE ok
13:50:39.3279 [ ] dvb/decoder.cpp:251 ~eDVBAudio [eDVBAudio0] destroy
13:50:39.3279 < > dvb/decoder.cpp:840 stop [eDVBText0] DEMUX_STOP ok
13:50:39.3285 [ ] dvb/decoder.cpp:851 ~eDVBTText [eDVBText0] destroy
13:50:39.3320 [ ] dvb/dvb.cpp:1499 DVBChannelStateChanged [eDVBResourceManager] start release channel timer
13:50:39.3331 [!W!] dvb/pmt.cpp:1088 tuneExt [eDVBServicePMTHandler] no .meta file found, trying to find PMT pid
13:50:39.3333 [ ] dvb/pmt.cpp:1097 tuneExt [eDVBServicePMTHandler] PMT pid 0100, service id 1
13:50:39.3333 [ ] dvb/pmt.cpp:1104 tuneExt [eDVBServicePMTHandler] alloc PVR
13:50:39.3334 [ ] dvb/dvbtime.cpp:700 DVBChannelStateChanged [eDVBLocalTimerHandler] remove channel 0x1edbf30
13:50:39.3334 [ ] dvb/epgcache.cpp:690 DVBChannelStateChanged [eEPGCache] remove channel 0x1edbf30
13:50:39.3349 [ ] dvb_ci/dvbci.cpp:904 addPMTHandler [eDVBCIInterfaces] addPMTHandler 3:0:0:1:0:0:0:0:0:0:/media/net/xxxxx/xxxxxxx/00005.MTS
13:50:39.3350 [ ] dvb/dvb.cpp:2423 getDemux [eDVBChannel] getDemux cap=01
13:50:39.3350 [ ] dvb/dvb.cpp:1107 allocateDemux [eDVBResourceManager] allocate demux cap=01
13:50:39.3350 [ ] dvb/dvb.cpp:1283 allocateDemux [eDVBResourceManager] allocating demux adapter=0, demux=4, source=-1
13:50:39.3351 [ ] dvb/tstools.cpp:98 setSource [eDVBTSTools] setSource loading streaminfo for /media/net/xxxxxx/xxxxxxxxxxxxx/00005.MTS
13:50:39.3365 [ E ] service/servicedvb.cpp:3107 loadCuesheet [eDVBServicePlay] cutfile not found!
13:50:39.3369 [ ] dvb/tstools.cpp:310 getPTS [eDVBTSTools] getPTS PTS 9fc4 found at 752 pid 1011 stream: e0
13:50:39.3375 [ ] dvb/tstools.cpp:310 getPTS [eDVBTSTools] getPTS PTS 1f3b64 found at 35303204 pid 1100 stream: fd
13:50:39.3450 [ ] base/ioprio.cpp:91 setIoPrio [setIoPrio] best-effort level 0 ok
. now we start!!
13:50:39.3452 [ ] dvb/filepush.cpp:61 thread [eFilePushThread] START thread
13:50:39.3476 [ ] bsod.cpp:402 print_backtrace Backtrace:
13:50:39.3488 [ ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x8544C]
13:50:39.3492 [ ] bsod.cpp:410 print_backtrace /lib/libc.so.6(__default_rt_sa_restorer) [0xB610CAD0]
13:50:39.3499 [ ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN15eDVBServicePlay12serviceEventEi) [0x1AEB24]
13:50:39.3502 [ ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(n/a) [0xC63F4]
13:50:39.3512 [ ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN21eDVBServicePMTHandler19channelStateChangedEP11iDVBChannel) [0xF0D38]
13:50:39.3529 [ ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(n/a) [0xC283C]
13:50:39.3535 [ ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN11eDVBChannel10playSourceER4ePtrI9iTsSourceEPKc) [0xBF584]
13:50:39.3540 [ ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN21eDVBServicePMTHandler7tuneExtER20eServiceReferenceDVBR4ePtrI9iTsSourceEPKcP9eCueSheetbP11eDVBServiceNS_11serviceTypeEb) [0xF2EE8]
13:50:39.3544 [ ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN15eDVBServicePlay5startEv) [0x1B00E4]
13:50:39.3550 [ ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN11eNavigation11playServiceERK17eServiceReference) [0x19DAE0]
13:50:39.3554 [ ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(n/a) [0x1822E8]
13:50:39.3555 [ ] bsod.cpp:422 handleFatalSignal -------FATAL SIGNAL
dmesg
<6>CPU2: update max cpu_capacity 256
<5>EXT4-fs (sda1): error count since last fsck: 1
<5>EXT4-fs (sda1): initial error at time 1512571461: ext4_find_entry:932: inode 46727169
<5>EXT4-fs (sda1): last error at time 1512571461: ext4_find_entry:932: inode 46727169
<6>hieth f9c30000.hieth eth0: Link is Down
<6>hieth f9c30000.hieth eth0: Link is Up - 100Mbps/Full - flow control rx/tx
<6>CPU0: update max cpu_capacity 1024
Display More
Capacity of LAN card or processor or both or something completely different?
New drivers implemented into VU duo 4k image to fix the "timer" button, thank you
However there is an issue on pure2 with timer button, while it now works it also pauses the channel:chuckle:
I replaced keymap.xml @ usr/share/enigma2 with the atv version and problem solved
would imagine a small typo somewhere, anyways file attached
Also the problem with launching kodi is still present on the duo 4k.... if/when the team has a chance
Still my favourite image, thanks all
Don’t have an account yet? Register yourself now and be a part of our community!