pls help
PurE2 Team Enigma2 Image for Amiko A5
-
- Amiko A5 PurE2
- nozorrog
- Thread is marked as Resolved.
-
-
Not "direct" but via modem/router or switch?
Make sure FTP and Telnet functions are running in Menu > System > Network!
Restart!
Check your address in pManager > Network > General info
Login details for FTP and Telnet:
username = root
password = pure2
I use:
FileZilla Client for FTP
PuTTy for Telnet.
If you are using v. 6.3 and it simply doesn't work, go back to PurE2 v. 6.2 and try.
Don't worry, it will work!
-
i have a problem with openwebif, when i turn on m3u playlist from openwebif oscam decrypt channel just for 19 seconds then it has a block and stop to decrypt ... why ? please help me
i use pur e2
-
Hi, unfortunately Pure2 quitted upgrading E2 images for Amiko A5 as they don't have this receiver at hand :) . They also deleted all the previous images.
This is the ultimate:
-
I am using Amiko A5 combo 4k with Android (linkdroid) and PureE2 6.2 quite well.
There are some minor throubles but it work.
Why they didn't stop support? It is a fantastic combo receiver. Does someone could tell us in details what's happens?
-
Hi, read the original source here:
http://www.hd-digital-satcrew.…a5-with-pure2/#post126409
And I agree completely, that Amiko A5 with it's functionality is among the best actual receivers.
It's MFG launched it in the world and forgot, hurrying to produce A6.
-
-
Hi, here is today's Pure2 updated version:
http://pur-e2.club/OU/images/index.php?dir=6.2/linkdroid/
Hi, here is аn ultimate Pure2 updated version:
alien5-PurE2-6.2-20200101_sdcard.zip (←click to download).
-
A simple SW update should be ok. WiFi AP/hotspot, Iwaatch-fnc. OLM-fnc, ch settings, etc.
-
Hi, here is today's Pure2 updated version:
http://pur-e2.club/OU/images/index.php?dir=6.2/linkdroid/
Hi, here is аn ultimate Pure2 updated version:
alien5-PurE2-6.2-20200101_sdcard.zip (←click to download).
-
Actually, there is even newer one, but no need to reflash, a simple SW update should be ok.
-
i have a problem with openwebif, when i turn on m3u playlist from openwebif oscam decrypt channel just for 19 seconds then it has a block and stop to decrypt ... why ? please help me
i use pur e2
problem solved ... I installed CCCAM and not OSCAM then problem solved :)))
-
i need an advice, how to install oscam-11691-arm_dream-EMU.zip published by sergio60 /Apr 17th 21/ in
section Oscam-Emu for Amiko A5. It is now installed oscam.emu-latest (patch) 11689-r798.
i use the program winscp and the scp protocol because A5 refuses to connect to the ftp protocol (in E2).
in android A5 the last oscam-svn11691-Amiko_A5-emu-r798 was successfully installed.
how to do the same for E2 (pure2 6.2). I tried software manager - install locall extensions
- memory / tmp without success. if i make a mistake in the procedure or pure2 6.2 it is no longer supported.
-
If you got the following error on FTP protocol "ECONNREFUSED - connection refused by the server" do the following:
1. connect via a browser in a PC in the same local network
2. put the IP address of the Amiko A5 decoder in the url on the browser (for example http://192.168.1.67/, your address may be different)
3. you will have the OpenWebIf interface for Amiko Alien 5 page
4. on the left down side go in the Extra section and click on "Terminal".
5. put username "root" and the password for pure2
Do the following command
Now you can connect to your decoder via FTP protocol.
After some days you will have to repeat once again the commands.
-
thank you for your help and instructions - motelodico72. the procedure was carried out and everything went well. the problem is solved. :hello
-
i need an advice, how to install oscam-11691-arm_dream-EMU.zip published by sergio60 /Apr 17th 21/ in
section Oscam-Emu for Amiko A5. It is now installed oscam.emu-latest (patch) 11689-r798.
i use the program WinSCP and the scp protocol because A5 refuses to connect to the ftp protocol (in E2).
in android A5 the last oscam-svn11691-Amiko_A5-emu-r798 was successfully installed.
how to do the same for E2 (pure2 6.2). I tried software manager - install locall extensions
- memory / tmp without success. if i make a mistake in the procedure or pure2 6.2 it is no longer supported.
Hi, I use Total Commander to enter Enigma2 (OpenATV 6.2). And WinSCP for Android. AMIKO A5.
E2: Press "Connect to FTP server"-"New connection".
1. Give a name to connection
2. Put IP of receiver : 192.168.1. ...
3. login: root
4. pass: root (OpenATV 6.2), pure2 (for Pure2)
5. Press OK
-
Hi sergio60, in android I successfully installed the last oscam-11691, I would like to do the same in E2 / pure2 6.2 /,
so I ask which path - specifically in which folder should be installed - to insert the last oscam-11691.
Now, I have oscam 11689 installed in E2 / pure2 6.2 / which I would like to update to oscam-11691.
I want to have oscam 11691 on android and on E2. now it's only on android.
- so I don't have a problem with WinSCP or Total Commander when connecting to the A5,
but I'm asking where (in which folder) to copy the last oscam 11691 for E2 /pure2 6,2/.
-
It’s simple use our cam feed and install oscam - latest and oscam config top
than replace your confs in /etc/tuxbox/config -
Hi sergio60, in android I successfully installed the last oscam-11691, I would like to do the same in E2 / pure2 6.2 /,
so I ask which path - specifically in which folder should be installed - to insert the last oscam-11691.
Now, I have oscam 11689 installed in E2 / pure2 6.2 / which I would like to update to oscam-11691.
I want to have oscam 11691 on android and on E2. now it's only on android.
- so I don't have a problem with WinSCP or Total Commander when connecting to the A5,
but I'm asking where (in which folder) to copy the last oscam 11691 for E2 /pure2 6,2/.
Hi, my Oscam ways:
config files-/etc/tuxbox/config(folder);
oscam-/usr/bin/cam(folder)
These folders are easily found by AlternativeSoftCamManager.
WinSCP is used in android;
Total Commander - in Enigma2.
-
sergio60 everything is resolved, thanks again for your help. :hello
Amiko Android, Enigma2 and Spark Receivers
Amiko Android, Enigma2 and Spark Receivers. Discuss everything related to Amiko here. Includes Kodi, MCAS, Oscam, Amiko A3 firmware, Amiko 3 Combo firmware, Amiko A4 firmware and OpenATV, OpenSPA and PurE2 images for Amiko A5 and A6 models.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!