Latest OSCam 11784 EMU 801 & icam & gx & sh4 - 15/05/2024
-
- Various
- ahmed gazye
- Thread is marked as Resolved.
There are 751 replies in this Thread which was already clicked 456,757 times. The last Post () by ahmed gazye.
-
-
>>>>>> this is bin file>>>>>>" oscam-svn11748-solo4k-webif-dvbapi-libdvbcsa-icam-neon-upx"
i believe I am not a novice, decided to do a fresh reinstall, it worked, reinstalled my backup it failed again. So the only option I have is fresh reinstall and not reinstall backup
-
ahmed gazye
Changed the title of the thread from “Latest OSCam 11747 EMU 798 all.ipk & sh4 - 13/03/2024” to “Latest OSCam 11748 EMU 799 all.ipk & sh4 - 14/03/2024”. -
-
I updated today to this 11748 version (Mohamed_OS), but unfortunately no one Sky DE Icam channel works for me!
I have used until now 11734 (also Mohamed_OS), without any problems! Also all icam Sky DE have worked! How come?
Do I have to reset something?
My Receiver is Vu+Uno4K SE (OATV 7.3)
THX for any HELP -
I updated today to this 11748 version (Mohamed_OS), but unfortunately no one Sky DE Icam channel works for me!
I have used until now 11734 (also Mohamed_OS), without any problems! Also all icam Sky DE have worked! How come?
Do I have to reset something?
My Receiver is Vu+Uno4K SE (OATV 7.3)
THX for any HELPreturn to 11734
-
I updated today to this 11748 version (Mohamed_OS), but unfortunately no one Sky DE Icam channel works for me!
I have used until now 11734 (also Mohamed_OS), without any problems! Also all icam Sky DE have worked! How come?
Do I have to reset something?
My Receiver is Vu+Uno4K SE (OATV 7.3)
THX for any HELPI had the same issue, only 11734 worked for me but decided to do a fresh install of the firmware and fresh install of all my plugins and everything works fine now for me on Vu+ Ultimo 4K with OBH firmware v5.3.016
-
I updated today to this 11748 version (Mohamed_OS), but unfortunately no one Sky DE Icam channel works for me!
I have used until now 11734 (also Mohamed_OS), without any problems! Also all icam Sky DE have worked! How come?
Do I have to reset something?
My Receiver is Vu+Uno4K SE (OATV 7.3)
THX for any HELPDon't forget to always backup the Oscam configuration
11748 works fine for me. Enter this command in Telnet:
/usr/bin/OSCam_11748-r799 -b
Don't forget the following rule in Oscam: Do not update the working Oscam.
If you really want to update the old Oscam, for example Oscam_11734, the new Oscam is Oscam_11748, you just need to overwrite the name of the current Oscam bin to the old one if it is the same as the old one.
-
Thanks for all the tips, I'm not a complete beginner, I know how to use the binary! I have always used all Oscam from Mohamed_OS and have always had very good experiences! But this 11748 version doesn't work for the first time! Today I installed the 11748 version compiled by Kitte888 and everything works GREAT! Thanks for your help
-
Thanks for all the tips, I'm not a complete beginner, I know how to use the binary! I have always used all Oscam from Mohamed_OS and have always had very good experiences! But this 11748 version doesn't work for the first time! Today I installed the 11748 version compiled by Kitte888 and everything works GREAT! Thanks for your help
I use Vu+4K. Mohamed_OS 11748 works fine for me. I haven't had any problems so far. Problems sometimes occurred with other OScam compilers. I'm glad you clarified the question...
-
-
BigManTom i had the same problem. I've found out that Stream Relay was set to disabled. After i have set it manually to enabled, it works.
Setting can be found via web interface - config - stream relay - mode.
This is a bit weird because i have this settings in my .conf file
[streamrelay]
stream_relay_enabled = 1
stream_ecm_delay = 5
stream_relay_ctab = 098D,0960,0961,0963
Hope it helps
-
BigManTom i had the same problem. I've found out that Stream Relay was set to disabled. After i have set it manually to enabled, it works.
Setting can be found via web interface - config - stream relay - mode.
This is a bit weird because i have this settings in my .conf file
[streamrelay]
stream_relay_enabled = 1
stream_ecm_delay = 5
stream_relay_ctab = 098D,0960,0961,0963
Hope it helps
THX i will try...
BigManTom i had the same problem. I've found out that Stream Relay was set to disabled. After i have set it manually to enabled, it works.
Setting can be found via web interface - config - stream relay - mode.
This is a bit weird because i have this settings in my .conf file
[streamrelay]
stream_relay_enabled = 1
stream_ecm_delay = 5
stream_relay_ctab = 098D,0960,0961,0963
Hope it helps
YES!!! This was the Problem!!! THX for your TIP!!! ;)
-
soft : NEWNIGMA2
DM 920
messages from telnet , any idea?
>>> Installing >>> enigma2-plugin-softcams-oscam ...
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package /tmp
Written by MOHAMED_OS (͡๏̯͡๏)
root DM920:~$
test this command
Code
Display Morewget -qO- --no-check-certificate "https://github.com/MOHAMED19OS/Enigma2_Store/blob/main/Cam_Emulator/online-setup?raw=true" | bash -s <ARGUMENT> OR: curl -LJso- "https://github.com/MOHAMED19OS/Enigma2_Store/blob/main/Cam_Emulator/online-setup?raw=true" | bash -s <ARGUMENT> oscam ncam powercam ultracam gosatplus-oscam gosatplus-ncam powercam-oscam powercam-ncam ultracam-oscam ultracam-ncam
-
Hi
I have a question.
DM 920
Newnigma2
I tried several times to test different versions of oscam from Mohamed_Os. Regardless of the version, everything from Mohamed_Os does not work on the DM 920. The other versions, or rather the same versions from other people here on the forum, work. Can someone tell me what I have to do to be able to test from Mohamed_Os?
Thank you -
Hi,
OSCAM installs fine. I run a new oscam with blue button and when I want to enter via 8888 - I can't. I checked the configuration files via FTP and everything is ok. I cannot enter through a browser with port 8888.
TV doesn't work as well
When i switch to previous oscam all works fine
MOHAMED_OS could you help pls ???
Thanks
-
Hi,
OSCAM installs fine. I run a new oscam with blue button and when I want to enter via 8888 - I can't. I checked the configuration files via FTP and everything is ok. I cannot enter through a browser with port 8888.
TV doesn't work as well
When i switch to previous oscam all works fine
MOHAMED_OS could you help pls ???
Thanks
run oscam use telnet and Upload log or image
-
-
ahmed gazye
Changed the title of the thread from “Latest OSCam 11748 EMU 799 all.ipk & sh4 - 14/03/2024” to “Latest OSCam 11751 EMU 800 all.ipk & sh4 - 22/03/2024”. -
-
OSCam 11751 EMU 800 - 22/03/2024
Compiled by MOHAMED_OS thanks for him
Codepython -c "$(wget https://raw.githubusercontent.com/MOHAMED19OS/Enigma2_Store/main/Cam_Emulator/installer.py -qO -)"
well.. question
Trojan:Script/Wacatac.B!ml
Why does my antivirus detect a Trojan in your IPK?
i have W11
Regards
-
Hi,
First of all, thanks for your great work.
I'm using Oscam 11740 and all OK.
When i try Oscam 11748 or 11751, they starts ok, i have all readers and users, but when i try to see any channel from SkyDE Icam, nothing appears.
Do you have any idea why?
Regards.
I see in another post in forum and change the config for stream relay for this
stream_relay_enabled = 1
stream_relay_buffer_opt = 0
stream_relay_buffer_time = 600
stream_relay_ctab = 09C4,098C,098D
stream_ecm_delay = 0and now it works great again with all oscam.
OSCam-EMU Support Forum
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!