My friend / Master G
Sorry, the replies were done at the same time so I did not see your response
Good luck
There are 775 replies in this Thread which was already clicked 482,878 times. The last Post () by ahmed gazye.
My friend / Master G
Sorry, the replies were done at the same time so I did not see your response
Good luck
Hello
I have a amiko alien 2
with openatv 6.2
can some tell me what oscam file I need
and how do I install it
Display MoreHow to install an ipk on any enigma2 receiver
FTP the IPK file over to your temp folder. var/volatile/tmp.
OpenATV install instructions
- Menu... setup... software management... install local extension
- memory/tmp
- Press ok on the package
- press green to install.
Thank You
how do you get the soft panel to work with oscam on pc
and when I run softcam
it says no active cam
OSCam svn11520 Emu-r796
Thanks audi06_19
Changeset [11520]
-Added support for a higher number of demux devices in CA PMT
-Modern enigma2 boxes with FCB tuners can have many demux devices,
-so a new CA PMT descriptor that allows up to 128 demuxes (descriptor tag 0x86) is now supported.
-Also, the get_demux_options() function is completely re-written,
-so it doesn't care for the order of descriptors inside the CA PMT message.
+ disablecrccws_hardcoded_for_Sky_and_Dorcel.patch by Pehedima
- 098C , 09C4 , 098D , 0500:050F00
-Added new tandberg keys *
oscam-svn11520-sh_4-webif-dvbapi-stapi5-emu796-upx.tar.gz
oscam-svn11520-sh4-webif-dvbapi-emu796-upx.tar.gz
Good luck
OSCam Svn Update 11.521 [ EMU ] r796
Thanks audi06_19
Repository history
fix webif save issue with high var count
+ disablecrccws_hardcoded_for_Sky_and_Dorcel.patch by Pehedima
- 098C , 09C4 , 098D , 0500:050F00
Added new tandberg keys *
Büncel binar dosyalar eklendi.
DreamOSat Script üzerinden güncelleme yapabilirsiniz.
oscam-svn11521-sh_4-webif-dvbapi-stapi5-emu796-upx.tar.gz
oscam-svn11521-sh4-webif-dvbapi-emu796-upx.tar.gz
Good luck
OSCam Svn Update 11.522 [ EMU ] r796
Thanks audi06_19
Repository history
Tryfix possible regression introduced in rev 11520
+ disablecrccws_hardcoded_for_Sky_and_Dorcel.patch by Pehedima
- 098C , 09C4 , 098D , 0500:050F00
Added new tandberg keys * #42.0E
oscam-svn11522-sh_4-webif-dvbapi-stapi5-emu796-upx.tar.gz
oscam-svn11522-sh4-webif-dvbapi-emu796-upx.tar.gz
Good luck
hello dear i need oscam reader dishtv is not working my reader please send me emulator i am waiting
My friend / ahmed majeed
What type of device and version is used and what will be used oscam reader dishtv
Good luck
OSCam Svn Update 11.522 [ EMU ] r796
my friends
Who did not work with the version oscam-svn11522-sh4-webif-dvbapi-emu796-upx ( audi06_19)
With extension file on some versions such as open atv ........etc because it needs to be versions with an extension ipk
download the same version of professor / /MOHAMED_OS topic
And it work in the extension file very good
Download from this link
Latest OscamEmu For STAPI & STAPI5 And SH4
Thanks professor /MOHAMED_OS
Good luck
hello, after installing the .ipk file in the temp folder with dcc, I install it on the decoder I switch off and restart, then I don't remember the next steps(amiko alien 2 with open atv 6.2
you most add your server in server emu ( oscam.server)
etc / tuxbox / config ( oscam.server)
&
usr / keys or var / keys( oscam.server)
Then go to any encrypted channel and run emu oscam
Good luck
OSCam Svn Update 11.523 [ EMU ] r796
my friends
download the version of professor / /MOHAMED_OS topic
Download from this link
Latest OscamEmu For STAPI & STAPI5 And SH4
Thanks professor /MOHAMED_OS
Good luck
OSCam Svn Update 11.523 [ EMU ] r796
Thanks audi06_19
Repository history
+ disablecrccws_hardcoded_for_Sky_and_Dorcel.patch by Pehedima
oscam-svn11523-sh_4-webif-dvbapi-stapi5-emu796-upx.tar.gz
oscam-svn11523-sh4-webif-dvbapi-emu796-upx.tar.gz
Good luck
hi, I put the line in etc / tuxbox / config / oscam-trunk, but when I go to the decoder and start oscam-trunk the screen remains black
Display More
you most add your server in server emu ( oscam.server)
etc / tuxbox / config ( oscam.server)
&
usr / keys or var / keys( oscam.server)
Then go to any encrypted channel and run emu oscam
Good luck
hi,i put the c-line in etc/tuxbox/config/oscam-trunk,but when i go to the box and start oscam-trunk the screen remains black
hi, I put the line in etc / tuxbox / config / oscam-trunk, but when I go to the decoder and start oscam-trunk the screen remains black
my friend / nikkola
OSCam Svn Update 11.523 [ EMU ] r796
download the version of professor / /MOHAMED_OS topic
Download from this link
Latest OscamEmu For STAPI & STAPI5 And SH4
Thanks professor /MOHAMED_OS
Good luck
my friend / nikkola
After unpacking the version, move it to the program dcc
To the extension var / emu or user / emu & gave emu Authorization 755
it work in the extension file very good
Good luck
i did,but i always have the black screen
jozzzz
OSCam Svn Update 11.523 [ EMU ] r796
EMU 796
Code
my friends
download the version of professor / /MOHAMED_OS topic
Download from this link
Latest OscamEmu For STAPI & STAPI5 And SH4
Thanks professor /MOHAMED_OS
Good luck
Don’t have an account yet? Register yourself now and be a part of our community!