DiSEqC Switches for E2 receivers

I recommend German SPAUN. justified price and quality.

watching the pictures seem complicated to agree, but set them properly and activate, working the clock.

although there are other cheaper disecq switches, but SPAUN is SPAUN

Are you sure it's 2.1?

1.0 - purpose for DiSEqC 4/1 clutch

1.1 - purpose for DiSEqC 1/10 switches or more (multifeed systems)

1.2 - purpose for DiSEqC 1.2 engine (as well as usalas)

I did not use protocol 2.1 for now (it probably has a function for antenna system engine).

The question is: what exactly do you use the equipment? fixed system or mobile (motorized system)

use diseqc protocol 1.1. it is intended for more than 4 satellites

T 90 multifeed 7 satellites. used spaun diseqc switches.

diseqc protocol is 1.1, but has small differences in setting the settings in the enigma2 receiver when using spa equipment or dissection switch 1/10. now it depends on what equipment you will use. spaun or disecq 1/10.

Proszę o pomoc bo nie mogę sobie z tym poradzić

mam DiseqC 8/1 Satmatrix EMS 81, i mam problem z ustawieniem żeby zadziałały wszystkie wyjścia, pierwsze A, B, C, D działają bez problemu w rożnych konfiguracjach ale następne E, F, G, G nie mogę ustawić próbowałem przestawić na różne konfiguracje, ale nie chce to wszystko ruszyć
Soft OpenATV, na dreamboxie 7020dh, ustawiam na razie na 5 satelit, bo nie wiem czy to ruszy na tym DiseqC-u

moje ustawienia na fotkach ale próbowałem już na wszystkie możliwe ustawienia

b0dfeea70ae2.jpgcbd58eab9c7e2.jpg4079b3e9c7f.jpgc335f3c27953b.jpga4f234649f74abd98e3.jpg49e91cc2557f65fb334f49.jpg

I have tried the spaun 411 wsg two times and they stopped working after some time. Now I need to buy a new switch again.

Whats the big difference between spaun sar 411 wsg and spaun sar 411f ?

Quote from gartner2000

I have tried the spaun 411 wsg two times and they stopped working after some time. Now I need to buy a new switch again.

Whats the big difference between spaun sar 411 wsg and spaun sar 411f ?

I don't think there is any difference. the only thing in the case. The 411WSG is for outdoor use (it has a protective box, while the 411F does not).
maybe you should look for the cause of the fault on the F connectors, coax. cable or lnb.
i use spaun switches 411 wsg (3 spaun switches + FTE UMS141 disecq 4/1) combined with spaun sur 420 F. they do a great job. except that I had to replace the LNB Inverto ultra black the other day (he started joking "there is a signal - no signal". I replaced it with a new lnb and everything works ok)
i don't believe the spaun would just break down just like that.

When I put cable from the switch and straight into the lnb it is fine. got signal on all lnb's.

The connectors on the cable, and the cable to the lnb itself looks fine.

So I feel it is strange.Don't beleve the switch would fail like that too...... The cable is not very old too..

I have a vu+ solo se. using Openatv. also tried OpenBlackHole.

I will need to test another switch / borrow another tuner for test / making new cables from the switch to the lnb's.