Can somebody help me?
i run oscamemu on three stbs, afn working fine with au and picture.
all other providers like sis, animal etc. Etc. Make au as well and decode acc. To oscam webinterface the same way as afn does, but....no picture.
same on dmm920 newnigma oscamemu 1147x, zgemma h9s with pure2 and 11491, openatv with 11491.
Also on ultimo4k with 11491.
why do i only have picture on afn but all other pv channels remain dark although oscam decodes them properly???
What does "although oscam decodes them properly" mean? How do you know that oscam-emu decodes them properly? Only a livelog with appropriate debug levels (4+128) can tell that, and of course posting your config settings.
the livelog first shows the au of the provider after a few minutes, then it decodes regularly, cw0 and cw1 are here, but the screen remains dark...
Ecm times 2-5 ms
I cannot believe this is a oscam error, right?
My cfg data comes later. Maybe one small parameter causes this...
Enter this for the reader:
disablecrccws = 1
I treid, but not working
Here is my oscam.server
[reader]
label = constant.cw
protocol = constcw
device = /etc/tuxbox/config/constant.cw
caid = 2600,0B00,0B02,0500,0963,06AD,0940
group = 6
[reader]
label = emulator
protocol = emu
device = emulator
services = !afn
#disablecrccws_only_for = 0E00:000000 #This parameter was used originally, the next line brought no change unfortunately
disablecrccws = 1
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 7
emmcache = 1,5,31,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
auprovid = 000E00
[reader]
label = AFN
description = AFN-EMU
protocol = emu
device = emulator
services = afn
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
disablecrccws = 1 # new here, did not use before, but no change
caid = 0E00
detect = cd
group = 7
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00
and my oscam.conf
[global]
disablelog = 1
logfile = /tmp/oscam.log
pidfile = /tmp/oscam.pid
unlockparental = 1
nice = -10
maxlogsize = 100
waitforcards = 0
preferlocalcards = 2
usrfile = /tmp/user.log
cwlogdir = /var/log/
emmlogdir = /var/log/
[cache]
[cs357x]
port = 4002
[cccam]
port = 4001
nodeid =
version = 2.3.0
reshare = 3
[streamrelay]
stream_relay_enabled = 0 # I tried 1 but no change
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dvbapi_local
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox
[webif]
httpport = 83
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.0.255,255.255.255.255
httposcamlabel = Oscam WebInterface
and oscam.user
[account]
user = dvbapi_local
au = 1
emmreassembly = 1
#group = 1,3,11,44
preferlocalcards = 0
cccignorereshare = 1
description = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20
As I wrote, AFN working fine, the other PVU provider also work fine in OSCAM, make AU, have valid CWs and so on. But no picture at all...
you dont need 2 powervu readers
[reader]
label = emulator
protocol = emu
device = emulator
# services = !afn
disablecrccws_only_for = 0E00:000000 #This parameter was used originally, the next line brought no change unfortunately
disablecrccws = 1
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 7
emmcache = 1,5,31,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
auprovid = 000E00
[streamrelay]
stream_relay_enabled = 0 # you dont want to use stream relay
[streamrelay]
stream_relay_enabled = 1 # you want to use stream relay
Hi,
the only thing that i changed was
| API for extended CWs | 1 - OE2.2 |
I have zgemma h52s plus with openpli
both does not help
And me is also the same problem. I read in another forum that is a wrong
update EMM keys, and lately they are changing keys almost every day.
This refer to 4.8 E 12322V 27500 AU not working , or it takes a
lot of time for make AU on properly way.
went back to oscam emu 11,994
and this config
[reader]
label = emulator
protocol = emu
device = emulator
/etc/tuxbox/config/SoftCam.Key
disablecrccws_only_for = 0E00:000000
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4 AE1:000011,000014,0000FE;1010:000000
group = 10
emmcache = 2,5,31,2
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
dont know if problem with oscam emu 11.501
but for me couldnt get it to work with it
but
oscam emu 11,994
sorted
oscam-svn11501-Powervu config
i will try that during the weekend. Anyway thx to everybody for your efforts
try to change the "extended cw api " value to 0, or 1...
I can do whatever I want, but only afn works. All other pvu providers have black screen, on dm920, zgemma, ultimo4k and Octagon sf8008. I give up. Can somebody, who has all pvu working, maybe send his cfg to me?
i think that it explained above, that there are two types of powervu decryption. des and csa. the one is working everywhere (afn) the other needs a few conditions to work.
also here is a section which contains configs
PowerVU config files for oscam-emu
but in any case, a few things could be different from a receiver to another...
extended cw api
think there is a problem on that setting
what used to work for me with extended_cw_api = 2
now works with setting extended_cw_api = 1
tell you the truth setting extended_cw_api = 2 dont work at least for me
not only oscam
its ncam too
best thing to do is go back to a version the worked for you
then go forward to the new one
you will find its not your fault its the new version
As far Powervu on Discovery on 4.8E problem is with EMM keys. Here it is seen that it has
retracted the same keys for both frequencies ( 12322 V and 12360 V )
P 5E0064 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E00C8 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E012C 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E012D 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E0190 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E0384 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E03E9 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E044C 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E0514 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E05DC 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E0320 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E06A4 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E0708 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E0C1C 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E0064 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E00C8 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E012C 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E012D 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E0190 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E0384 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E03E9 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E044C 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E0514 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E05DC 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E0320 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E06A4 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E0708 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
P 5E0C1C 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56
Now you can watch programs from 12360 V after AU keys, but not with 12322 V
because they are the wrong keys after AU.
5E0064 - 5E0514 - 12322 V - wrong keys
5E05DC - 5E0CIC - 12360 - OK
The same and vice versa.
I think that is not a problem in oscam config than is EMM keys.
Regards
it is working now, most of the packages even au. The problem was that some of my peers obviously used old invalid keys, which my local oscam recognized as valid keys somehow.
Strange, but ok now if using r789 oscamemu.
Anyway thx to everybody who tried to help.
No problem with ncam ?
Don’t have an account yet? Register yourself now and be a part of our community!
