Vu+ remote

things have changed with new box's

i assume its a new box

come to think of it only YOU know's what box it is

new Vuzero4K

http://www.vuplus.com/manual/V…0User%20Manual_180116.pdf

for your Vu+ SOLO4K which you should have quoted

http://vuplus.com/manual/Vu+_SOLO4K_User_Manual_english.pdf

VuPlus-Uno OLDER

http://lalaga.dyndns.tv/enigma2/VU+_RCU_set_up_guide.pdf

Instructions below bud...

2-7. Remote Control Unit (RCU) Set-up

Vu+ RCU is a universal RCU that can be used for TV and STB at the same time.

A. User Guide of Vu+ Universal RCU

Pre-note

<< >> means long press

< > means normal press

4 digit code can be found in the TV brand code list of the user manual.

The new RCU of Vu+ is a universal type and you can control your Vu+ STB and TV at the same time. This

universal RCU is a modeless design. While offering the basic control functions of your TV (TV Power,

Volume +/-, Mute, AV), you can control STB without having to select mode between TV and STB every

time. Compared to those universal RCU of mode selection types, the modeless universal RCU of Vu+ is

clearly a smarter choice by eliminating unneeded control functions.

1. TV setting

Set-up Sequence: <<1 + 3>>, <4digit brand-code>, <<Mute or Power>>

1.Press number 1and 3 for three seconds until LED is on.

2.Find your TV brand-code from the TV code list and insert 4 digit code.

- If you press ¡°0000¡±, Full Automatic Scan will start. This will take a while.

3.Keep Mute button (or Power) pressed until your TV is muted (or turned off).

4.If your TV is muted (or turned off), stop pressing Mute button.

5.Now, your RCU is in test mode and press Volume + /- to check if your TV responds.

6.If the volume buttons are operational, Press <OK + STOP ( )> to escape from the set-up mode.

2. AV setting

AV button is for the selection of TV video source. AV button may be automatically set up depending on TV

models. In case it is not automatically configured, please follow the instructions below.

Set-up Sequence <<1 + 9>>, <<AV>>

1.Press 1 and 9 for three seconds until LED is turned on.

2.Keep AV button pressed until your TV responds and displays the video input source.

3.If AV button is working, check if AV button is properly working several times.

4.Press <OK + STOP ( )> to escape from the set-up mode.

3. RCU Buttons for TV •Buttons for TV only: TV Power. AV

•Buttons switchable between TV and STB: Volume +/ - and Mute

- These buttons are for STB only before the RCU set-up is done.

- It is switchable only after the configuration is done.

•All the other buttons are for STB only

4. Mode Switch of Volume + / - and Mute

For the sake of easy volume control, please set the STB volume at 50% of the maximum level and set

this level as the default volume level from STB. Then, you just have to control your TV volume only without

having to adjust STB volume at the same time.

Set-up Sequence: <<1 + 6>>, <9>, <9>, <3>, <TV Power or STB Power> 1.Press 1and 6 for three seconds until LED is on.

2.Press <9>, <9>, <3>.

3.If you want to control of TV volume, press TV Power button. If you want to control STB volume, press

STB Power button.

5. Reset of TV Set-up

In case you want to reset the configured TV set-up of your RCU, Press Sequence: <<1 + 6>>, <9>, <9>, <6>

1.Press 1and 6 for three seconds until LED is on.

2.Press <9>, <9>, <6>.

3.This will reverse the RCU into no configuration state.

6. System Code Change.

You can change the system code of your Vu+ universal RCU according to the Vu+ model that you want to

control. The default system code is Mode 2.

Mode 1 : SOLO / DUO

Mode 2 : UNO / Ultimo / SOLO2 / DUO2

Mode 3 & 4 : reserved for future models.

Press <<2 + 7>>, <HELP>, <0001 or 0002 or 0003 or 0004> 1. Press 2 and 7 for three seconds until LED is on.

2. Press HELP

3. Press <0001 or 0002 or 0003 or 0004>

DISCLAIMER

--------------------------------------------------------------------------------

Vu+ universal remote controller (RCU) is developed with Philips Electronics. The database used in the Vu+

RCU supports more than 90% of the TV brands available on market. This means that your TV may not be

compatible with this universal RCU in some rare cases. In this case, Vu+ RCU can be used only for Vu+

set top box.