Discussion of article How to flash Gigablue HD 800 SE PLUS Linux Enigma2 Receiver:
QuoteFlashing the Receiver.Display More
1) Power off the receiver
2) Ensure no other USB devices are plugged into the receiver while flashing.
3) Insert the USB stick containing the image files into one of the usb ports on the receiver, rear usb port is advised if possible.
4) Power the receiver on.
5) When the receiver powers up you will see USB then CONF on the receivers display.
6) As soon as you see CONF press the OK button behind the front flap of the receiver to start the flashing process.
7) If…
