CreateMini programTo split external flash for MultiBoot
Small size utility is great for you to split the external flash
On a Windows system split with a Linux system extension
This program is named CreateMini
The first step that is done on the computer is to open the program on the computer should be responsible
After you open the program, click Settings
We will show you the picture now. It is your turn to choose between the available alternatives, but as part of the program
The first part is to spread the swab by extension fat32
7 parts to install the copies by extension ext2
selected as picture according to the size of the flash and the number of copies required to be installed, but the maximum 8 parts
The second choice for you is the size of each installation depends on the size of the Albertine on the size of your flash is better to be between 500 to 2 megabytes depending on the size of your Flash Why choose 500 MB to be a suitable capacity for copying as long as we worked on the external flash to increase the space and why we made the maximum 2 gigabytes More than that will be wasted unnecessarily since the copy of Angaima by all additions, no matter how great to increase in any way
If you choose to select different areas, you must know the correct box in the upper box and click OK.
You will see this picture Click Format If you choose equal copies, you will receive a warning message telling you that this will want to scan what is on the dashboard, OK and complete the program will leave it until it ends
If you choose to split the flash to different parts of the space will show you this image
The program will divide the parts Equal and you will have the adjustment of your choice
after the previous image to determine the area of each Prtchen stand with the mouse on the first Albert mouse to determine the area of each of the first on the first and then the second and so as the picture and remember that every 50 cylinder equal 392 MB as picture You can add and subtract in volume, for example, 55, 75 or 125 cylinders until you reach the size of the required space for each original version. Each cylinder is equal to 7 MB. Here you can set the required area by dividing the required area by seven and write it to the first size. With a space of 1 gigabyte 1024 megapixels Wen the number to be written
According to the following 1024/7 = about 147 cylinder
After the program is finished, remove the flash from the computer
Put them in the receiver in preparation for work on them
If you intend to partition to a larger number of 8 parts, you should use another program
MiniToolPartitionWizard
This needs another topic
good luck