hello every one
i have dm800 and don't knew about it ,which type of my box firmware support
bord number = dm800 rev:j
sim type =2.01
tuner =ALPS BSBe2
hello every one
i have dm800 and don't knew about it ,which type of my box firmware support
bord number = dm800 rev:j
sim type =2.01
tuner =ALPS BSBe2
You have a SIM 2 DM800 clone.
Before flashing a new image, it would be safe to also update the bootloader.
Latest Secondstage Bootloader For DM800 Clone Sim 2.01
How to flash a Dreambox DM800 HD via a Browser
Flash the bootloader first, don`t reboot yet.. Open another browser and flash the image of choice, now reboot.
I suggest you for your receiver BlackHole image in attach. I have also this image,
but on DM800SE original. Mount USB and expand flash with flashexpander or PluginSkinMover
I suggest you for your receiver BlackHole image in attach. I have also this image,
but on DM800SE original. Mount USB and expand flash with flashexpander or PluginSkinMover
Display MoreYou have a SIM 2 DM800 clone.
Before flashing a new image, it would be safe to also update the bootloader.
Latest Secondstage Bootloader For DM800 Clone Sim 2.01
How to flash a Dreambox DM800 HD via a Browser
Flash the bootloader first, don`t reboot yet.. Open another browser and flash the image of choice, now reboot.
i used this method but no success.
Flash the boot-loader first, open another browser and flash the image ,now reboot.
wen i reboot my box no image loded my box restart agine and agine
Did you flash image using Firmware Update, when you type IP address in browser
which is showing on LCD display?
Did you flash image using Firmware Update, when you type IP address in browser
which is showing on LCD display?
yas
Did you flash image using Firmware Update, when you type IP address in browser
which is showing on LCD display?
lcd showing . sim 201 team http://www.dm800sim2.com 192.168.20.162 ***stop***
Can you flash image again, I think maybe it should once again flash SSL after image, and make reboot.
Can you flash image again, I think maybe it should once again flash SSL after image, and make reboot.
i am try but no success
Display MoreYou have a SIM 2 DM800 clone.
Before flashing a new image, it would be safe to also update the bootloader.
Latest Secondstage Bootloader For DM800 Clone Sim 2.01
How to flash a Dreambox DM800 HD via a Browser
Flash the bootloader first, don`t reboot yet.. Open another browser and flash the image of choice, now reboot.
master G i am flash opents and open vision image is run but wen i going to tuner configuration it say no tuner A (empty)
Can you flash image again, I think maybe it should once again flash SSL after image, and make reboot.
This due to missing or corrupt drivers, typical for Clones when people make clone images they forget to add patched tuner drivers.
You have to try another sim 2.01 image where the drivers are patched.
This due to missing or corrupt drivers, typical for Clones when people make clone images they forget to add patched tuner drivers.
You have to try another sim 2.01 image where the drivers are patched.
can we add patched tuner drivers?
This due to missing or corrupt drivers, typical for Clones when people make clone images they forget to add patched tuner drivers.
You have to try another sim 2.01 image where the drivers are patched.
can we add patched tuner drivers?
ALPS BSBE2-401A my tuner number
I am guessing you have download and flashed this image published by wika
OpenTS Image 3.7 DM800 Sim2 SSl84D
You have to ask him to publish the patched drivers or to update his build with patched drivers.
DM800HD clones are so old i dubt that there have been any updates for many years so
should not be a problem. And you can test with some other images also. Most of them are correct builds.
images is here: DM800 HD Clone Images
You can go for older images since there has been no new driver updates since 2015 ;)
Display MoreI am guessing you have download and flashed this image published by wika
OpenTS Image 3.7 DM800 Sim2 SSl84D
You have to ask him to publish the patched drivers or to update his build with patched drivers.
DM800HD clones are so old i dubt that there have been any updates for many years so
should not be a problem. And you can test with some other images also. Most of them are correct builds.
images is here: DM800 HD Clone Images
You can go for older images since there has been no new driver updates since 2015 ;)
i am install openpli 4 same problem
And you are sure your tuner is working?
This old clones are famous for burning the tuner (Overheating)
So i know people hade to use extra cooling fans otherwise the tuner got burned.
Did you try to change tuner settings in Setup - System - Customize - Preffered tuner to auto?
Did you try to change tuner settings in Setup - System - Customize - Preffered tuner to auto?
If you look at his screenshots there is no installed tuner to find.
I suggest he open upd the STB and check that tuner has not slipped out of the slot
since they are plug and play. and turm on his DM if tuner stays ice cold its dead/burned
This situation also happens with the driver has a problem with the sim card (not authentified).
Emo
Did you try to change tuner settings in Setup - System - Customize - Preffered tuner to auto?
If you look at his screenshots there is no installed tuner to find.
I suggest he open upd the STB and check that tuner has not slipped out of the slot
since they are plug and play. and turm on his DM if tuner stays ice cold its dead/burned
Don’t have an account yet? Register yourself now and be a part of our community!