Latest OscamEmu For Dreambox & VU+ - DOWNLOAD ONLY NO CHAT

**MOHAMED_OS** · Apr 5th 2019

mipsel

Code

DM 500HD/800(SE)/820/7020HD/7025(+)/7080/8000/VU+

solo4k

Code

Vu+ Solo4k, Uno4k, Ultimo4k

vuduo4k

Code

DM 900UHD/920UHD
 Vu+ Solo4k, Uno4k, Ultimo4k/ DS114/DS115j/DS213j/DS214

dream_one

Code

Edision OS  dream-one UHD 4K  dream-Tow UHD 4K

GxApi

Code

List of STB's:

Octagon SX88

Octagon SX88+

Octagon SX88+ Optima

Octagon SX88+ Combo

Octagon SX888 IP

Octagon ASAT HDR No.1

###

Denys H.265

Denys H.265_EU

Denys_H.265_PRO

Denys_H.265_PRO_Combo

Denys H. 265_PRO_Combo_EU

##

Golden Interstar ALPHA X

Display More

.:. Image :: OE2.0 .:.

Code

 opkg update
 opkg install libusb-1.0-0
 opkg install libssl1.0.0 or libssl1.0.2 
 opkg install libcrypto1.0.0 or libcrypto1.0.2 
 opkg install libpcsclite1

.:. Image :: OE2.5/2.6 .:.

Code

 apt-get update
 apt-get install libusb-1.0-0
 apt-get install libssl1.0.0
 apt-get install libcrypto1.0.0
 apt-get install libpcsclite1

:whistle:

Any problem found in Oscam, please submit the problem here

The LATEST OSCAM-EMU FOR VARIOUS PLATFORMS Discussion and Request Thread

**MOHAMED_OS** · Apr 5th 2019

Error fixed :zip it::zip it::zip it::bulb:

Add smargo smartreader :angear::star::whatthefuck:

**MOHAMED_OS** · Apr 7th 2019

oscam11508-emu794 :snort:

Add :plannedsomethingevil:

Modern Webif :angear:

Code

Message:

    first part of the rework on dvbapi
    to incrase the amount of descramblers

    Get available descramblers in box and BISS2 related changes

        Instead of using a predefined number of descramblers (16 until now), oscam now gets the exact number of available descramblers in box.
        Skip cw checks for BISS2, similar to what is done for BISS1. BISS2 uses 16 byte cw, so some checks need to be skipped.
        Cosmetic changes including code refactoring, variable renaming and comment addition to several places.

**MOHAMED_OS** · Apr 8th 2019

oscam11509-emu794 :snort:

Code

Message:

    part 2.

    Support for DVB-CISSA scrambling algorithm and 16 byte CWs

    DVB-CISSA is defined in
    https://www.etsi.org/deliver/etsi_ts/103100_103199/103127/01.01.01_60/ts_103127v010101p.pdf
    enigma2 box manufacturers should support the new ioctl(CA_SET_DESCR_DATA) as defined in the module-dvbapi.h

**MOHAMED_OS** · Apr 8th 2019

oscam11509-emu795 :snort:

Code

    Added support for BISS2 mode 1 and mode CA *
    Added support for DVB-CISSA algorithm
    Increased descramblers to the actual number available on each box **
    Other small optimizations and improvements

*BISS2 mode 1 works similar to BISS1 mode 1. See Note 10 in https://github.com/oscam-emu/oscam-patched/wiki/BISS1-and-BISS2-mode-1-config for details. BISS2 mode CA is competely different though. See https://github.com/oscam-emu/oscam-patched/wiki/BISS2-mode-CA-config for details.

From this version and on, building OSCam-Emu will require linking with libcrypto due to the extedned use of cryptographic functions in BISS2 code. This means that you must enable the USE_SSL=1 or USE_LIBCRYPTO=1 switches when compiling.

**Previously, OSCam-Emu only used 16 descramblers in enigma2 boxes. Now, all descramblers available in a box (modern boxes have 64 or even 96 descramblers) are used, which means many more channels can be descrambled simultaneously. Fox example, with 16 descramblers only 3 or 4 PowerVu channels could be descrambled at the same time, while with 64 we can descramble ~4 times more.

**MOHAMED_OS** · Apr 9th 2019

Changeset 11510

Code

Message:

    small text typo fixes

**MOHAMED_OS** · Apr 10th 2019

Changeset 11512

Code

Message:

    fixed the problem and oscam-emu can now be built with static libcrypto

**MOHAMED_OS** · Apr 11th 2019

Changeset 11513

Code

Message:

    fix building
    incrase MAX_ECM_PIDS, MAX_EMM_PIDS and CA_MAX

**MOHAMED_OS** · Apr 16th 2019

EmU 795

sync to 11514

Code

[osemu] Dropped videoguard module …

- No channel uses it anymore


[osemu] Dropped drecrypt module …

- No channel uses it anymore


[dvbapi] Increased MAX_STREAM_INDICES back to 32 …

- It should be equal to MAX_STREAM_PIDS or else it creates problems with specific powervu channels. A better solution (with will also result in even lower number of descramblers needed for powervu channels) will be added in the future.

Display More

**MOHAMED_OS** · Apr 19th 2019

Changeset 11515

Code

Message:

    small fix to the open() call when we get the descrambler count from the box

**MOHAMED_OS** · Apr 21st 2019

Changeset 11517

Code

Message:

        fix bug in disablecrccws_only_for also in cacheex
        general disable checksum correction code optimization 

    thanks to kabeltod

**MOHAMED_OS** · Apr 30th 2019

Code

The patch allows NDS stations (currently only Sky SATs) to potentially overwrite the new 64bit CWs and optionally also throw them.


Please note the following:

- The function is enabled only with "disablecrccws_only_for" and only in oscam.server in the config config.

- you can be sure that with the dropbadcws = 1 in the reader configuration, a potentially incorrect CW is discarded, otherwise there is only one log message and no action is taken

- Bad CW detection basically works with "only" 99.998% accuracy and so can theoretically provide a scam

- Otherwise, the behavior continues to use a 48bit CW to a deception, as in the case of existing baggage, except for the arrival of transmitters

- An incorrect message associated with ır dropbadcws = 1 veya causes the freeze to freeze or the station remains dark at all times when it comes to 48bit CWs.


Channel groups that can make reservations on the NDS map and still use 48bit CW will be HD +, ORF, HD Austria and PYUR.

Display More

**MOHAMED_OS** · May 1st 2019

[dvbapi] Fix for stapi, coolapi, etc

**MOHAMED_OS** · May 5th 2019

Code

 [streamserver + powervu] Use the new key method here as well

We can get the tsid, onid and ens values from the service reference, so this is possible after all. Thanks a friend for reminding.


 [powervu] Added new method for matching ECM and EMM keys

Read the wiki for instructions on how to use it: https://github.com/oscam-emu/oscam-patched/wiki/PowerVU-config#matching-ecm-and-emm-keys-based-on-transponder-new-method---may-2019
This method is based on enigma2 namespace and it is only available for enigma2 and Tvheadend/VDR software for PC. Also, it does not work with stream relay.

**MOHAMED_OS** · May 5th 2019

Changeset 11518

Code

Message:

    DVBAPI:
    Fixed bug in dvbapi not releasing used descramblers in stapi, coolapi and gxapi boxes
    Increased MAX_STREAM_INDICES back to 32 (it must be equal to MAX_STREAM_PIDS)
    Modified the get_emm_filter_adv() function to accept more arguments

    OTHER:
    Cosmetics to module-cccam.c and module-cccam-cacheex.x
    Removed some emu specific code not needed anymore

Emu 796

Code

    Added a new method for matching powervu keys *
    Dropped unused videoguard and drecrypt modules
    Other small optimizations and improvements

*The new powervu key method is available for both dvbapi and stream relay, but it works only on devices that support the enigma namespace. Read the wiki for more details: https://github.com/oscam-emu/oscam-patched/wiki/PowerVU-config#matching-ecm-and-emm-keys-based-on-transponder-new-method---may-2019

Note: Starting from this version, we will provide binaries for some of the most common cpu architectures. They are compiled with default settings and are dynamically linked against libcrypto 1.0.2r.

**MOHAMED_OS** · May 15th 2019

oscam11518-emu796

Code

[biss] Increased variable size to avoid potential overflow

[viaccess] Fixed CW checksum bytes for viaccess 2

**MOHAMED_OS** · Jun 7th 2019

Changeset 11522

Code

Message:
    Tryfix possible regression introduced in rev 11520

**MOHAMED_OS** · Jun 12th 2019

Changeset 11523

Code

Message:

        Revert 11522 and applied correct fix made by nautilus7

**MOHAMED_OS** · Jun 24th 2019

_{EMU 796}

Code

[biss] Bug fixes and improvements to BISS2 mode CA

[osemu] Cleaned up error codes and did some cosmetics

**MOHAMED_OS** · Jun 29th 2019

Code

Changeset 11524
[dvbapi] Changed variable name (cosmetic)
dvbapi_parse_capmt() returns the demux_id, not the pmt_pid, so use a proper variable name.

Changeset 11525
[dvbapi] Changes to a couple of log messages

Changeset 11526
[dvbapi] When parsing PAT, save found PMT pid in the demuxer
This way we can later start the PMT filter without explicitly passing the PMT pid.

Changeset 11527
[dvbapi] Moved reading of priority entries in separate functions

Changeset 11528
 [dvbapi] Moved parsing of CA descriptor to a separate function
 This is necessary for the upcoming changes.

Changeset 11529
 [dvbapi] Moved #define's to header file and made a few cosmetic changes
 The CA PMT list management defined values are updated with proper info from the corresponding standard, instead of using OpenPLi's  poor explanatory text.

Display More

Latest OscamEmu For Dreambox & VU+ - DOWNLOAD ONLY NO CHAT

The LATEST OSCAM-EMU FOR VARIOUS PLATFORMS Discussion and Request Thread

MOHAMED_OS Apr 8th 2019

Changeset 11510

Changeset 11512

Changeset 11513

MOHAMED_OS Apr 19th 2019

Changeset 11515

Changeset 11517

MOHAMED_OS May 5th 2019

Changeset 11518

Changeset 11522

Changeset 11523

OSCam-EMU Support Forum

Participate now!

Share

Tags