MultiCS r82 by hellboy - All Versions
-
- MultiCS
- gerant
- Closed
- Thread is marked as Resolved.
-
-
yes sir i do this and working fine now
but big issue is we cant updait any profile in cfg when we updait the server is crash
how can fix these profiles
[[Airtel Digital tv -108east]]
PORT : 8001
CAID : 09AA
PROVIDERS : 000000
[CONAX ALL]
CAID: 0B00
PROVIDERS: 000000
PORT: +
ECM CHECK LENGTH: NO
##############################
=====================
[Sun Direct (93E)]
PORT: +
CAID: 0649
PROVIDERS: 000000,000001,000002,000003,000004
ONID: 0012
==========================
[Sun Direct (93E)]
PORT: +
CAID: 0100
PROVIDERS: 005E14
ONID: 0001
-
your in asia
im in europe
your profiles mean nothing to me
## *** INTERFACE
################################################## ########
HTTP PORT: 8844
HTTP USER: admin
HTTP PASS: admin
HTTP EDITOR: ON
HTTP RESTART: ON
HTTP AUTOREFRESH: 1
# FILE IP2COUNTRY: "/var/etc/multics/ip2country.csv"
# FILE CHANNELINFO: "/var/etc/multics/CCcam.channelinfo"
# FILE PROVIDERINFO: "/var/etc/multics/CCcam.providers"
## FILE STYLESHEET: "/var/etc/multics/New/Achille.css"
HTTP TITLE: "My Server"
INCLUDE "/var/etc/multics/CCcam.channelinfo"
[Sun Direct (93E)]
PORT: +
CAID: 0649
PROVIDERS: 000000,000001,000002,000003,000004
ONID: 0012
==========================
change to this
[Sun Direct (93E)]
PORT: +
CAID: 0649
PROVIDERS: 000000
ONID: 0012
==========================
read post 30
MultiCS r82 by hellboy - All Versions
the thread is a continuous thread of info
sometimes what you need is allready there
-
let see sir
-
sir pleas fix this for me
[[Airtel Digital tv -108east]]
PORT : 8001
CAID : 09AA
PROVIDERS : 000000
[CONAX ALL]
CAID: 0B00
PROVIDERS: 000000
PORT: +
ECM CHECK LENGTH: NO
-
if you READ post 30 it tells you
dont expect others to do what you can do
and thats just read it
[Sun Direct (93E)]
PORT: +
CAID: 0649
PROVIDERS: 000000
ONID: 0012
[Airtel Digital tv -108east]
PORT : +
CAID : 09AA
PROVIDERS : 000000
[CONAX ALL]
PORT: +
CAID: 0B00
PROVIDERS: 000000
ECM CHECK LENGTH: NO
==========================
-
You Are Great .....now working owsome
i think before on multics we must update that all profile which one we need?
-
Mansoor Hassan and all others kindly share your working configs cfg here. my config not run. i just try it first time need a well managed cfg for HB r47
-
dear bro i use defult satting of v47 ...no any changing just download this version and install working fine
-
working fine now
-
r82-hellboy-V48
## Changelog
## r82-hellboy-V48
- [REV] reverted fix on race condition and made thread safe the DCW check, up now CPU load and DCW time like before
- [FIX] ECM HEADERWLST will now allow only with the right syntax and also fixed on show current config page
- [FIX] CS378X connection fix after reboot
-
hellboy multics for testing only !
-
r82-hellboy-V49
- [FIX] CS378X/CCcam connection working again with OSCAM Trunk version- [ENH] new config parameter
HTTP ALERTS: OFF ## Show Alerts page (default: ON)
- [ENH] Cacheex become a new config parameter for Cacheex AIO Oscam
CS378X USER EXT: ## Give cacheex AIO user
CS378X SERVER EXT: ## Connect to AIO cacheex server
- [ENH] Added search on failban Page
- [ENH] On new HB version if Telegram bot is set (TELEGRAM SYSTEM: 1), you will receive a message
- [FIX] On Debug Page when new Hellboy version popup window showed, The close button was not working, now fixed.
- [CLN] mgcamd cachedcw was not fully implemented and removed from webinterface.
-
Hello to all, i'm kind of new on the multics.... so probably my question is dumb.
i'm having this issue when i try to add C line
[2020/10/03 19:48:10.523] INFO - CCcam: server (name of the line) Disconnected ! HB version smaler than previous !
[2020/10/03 19:48:10.523] INFO - CCcam: server (name of the line), info: version 2.3.2 build 4000
i'm i missing some config... i cant really find where is the problem. using the r82 Hellboy v49
-
r82-hellboy-V50
## r82-hellboy-V50
- [FIX] Higher CPU usage when AIO fixed
- [ENH] added 1883:003311 on hardcoded skip check
- [FIX] when inside config no cache port defined or wrong cache config, then was segfault
- [FIX] Fixed on new HB version message via Telegram
- [ENH] Added aarch64 architecture
-
r82-hellboy-V51
## r82-hellboy-V51
- [ENH] Show more info on Home Page
- [ENH] On Servers Page when you click to see the server usage and information was fix to be fit in one single Page like by Profiles info
- [ENH] non supported versions will be filtered with (firewall) failban iptables from Hellboy if enabled (only by cache peers)
- [FIX] when no profiles defined segfault, replaced with error message
- [FIX] default config folder was sometimes misconfigured
- [CLN] removed autoadd/audoenable from cache to prevent not wanted connections
- [CLN] removed 1841 from skip, this caid no more exists
- [ENH] added on alert page, link(s) to whois on IP Adresses
Info: for other CPU architecture, please contact us on forum!
-
r82-hellboy-V52
## r82-hellboy-V52
- [ENH] added some missing link(s) to whois on IP Adresses on alerts Page
- [ENH] Save and restore IPTABLES Firewall rules
If you start multics.x64 -b -> then default config folder is /var/etc/multics.cfg and it will be saved the iptables rules in /var/etc/hb-rules.v4
if you start like this multics.x64 -b -C /home/test/multics.cfg then it will be saved the rules in /home/test/hb-rules.v4
And by start of Hellboy you can see in log while restoring the rules
[2020/10/15 20:45:33.490] INFO - Restoring IPTABLE rules /var/etc/hb-rules.v4
- [ENH] Enhanced homepage Server Info
Added HB CPU Usage -> this is the Current usage not like the other what is Average ! So here sometimes will be bigger than Average !
Added to show number of core(s) of your CPU
Colored and separated the ON OFF ACT fields
- [FIX] Threshold(s) was broken, now fixed
- [ENH] Added DEFAULT CACHE THRESHOLD: 1 option (default 1) and for profiles you can set separate like this CACHE THRESHOLD: x
NOTE! The old option at cache server CACHE THRESHOLD no more valid use the DEFAULT option and for profiles like mentioned
-
Hey Guys,
On version 52 each time I change the editor the cccam ports are not being listen again and need to reboot the multics... this is anoying.
anyone with this beahvior
-
r82-hellboy-V53
- [FIX] segfault caused by CACHE THRESHOLD fixed and replaced with error on log
- [FIX] buffer overflow on mgcamd and newcamd server module
- [ENH] Enhanced the Failban option like this
FAILBAN CCCAM: 1 40 (1-255)
FAILBAN MGCAMD: 1 15
FAILBAN NEWCAMD: 0
FAILBAN CACHE: 1 3
so after enable the option for failban and you want to give a limit for occurrence for Client 'xxxx' just connected, new connection closed,
simple write like upper mentioned FAILBAN NEWCAMD: 1 25 -> if 25 times occurred it will be banned.
This option available for CCCAM, MGCAMD, NEWCAMD and CACHE -> here the limit is applied for "cache: Alert! unknown peer"
- [FIX] show the correct value on page show current config by FAILBAN configuration, NOTE: here if you set FAILBAN ENABLE: 1 then all other protocols will be enabled doesn't matte if in config they are not enabled. For separate protocol(s) to enable FAIBLAN ENABLE: 0 and set 1 to witch protocol you want to enable
- [ENH] added cache and server threshold on profile configuration page overview
- [ENH] added date-time to failban in the saved rules, with string format like this (d.m.Y 24h:min) at the end of comments -
why no for enigma 2
Other Not Listed Softcam Support Forum
Configs, discussion, downloads and guides for Other Not Listed Softcams - CSP, DreamOS, GBox, NEWCamd, MultiCS, OSCam Smod, OSCam Ymod, SUpcam & Wicardd.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!