In my tests, H9s, all images don't have blindscan plugin C band working (3400 ~4200, for example) and (only Ku).. then, I'm using my vuzero4k to do this...
According support SF8008, changing own drivers, symbol rate working fine blindscan starting 100 until 80000. H9s, same cpu and demod, only 1000 to 45000... and now, for me, all images available don't have good choice.
I hope someone can correct the Blind scan plug in for C-BAND, my box is on the shelve, not using it.
Why don't you edit the satellites file, add the TPs you want and scan in peace?
We have many wild feeds here in America and the only way to pick them is by blind scan, here in America blind scan is a must.
Thanks for your suggestions.
Regards.
Chewie
There are feed hunters around the world, sharing the info, so usually these are not ad hoc TPs but they have been used before and will likely be used again, so if you put those reported frequencies in the list... ;)
Chewie I too use zgemma h9 blind scan. I have used your user defined settings only increasing the threshold to 17000. And your same settings in the blind scan page
One sat with normal scan would miss many transponders Noticing only horizontal transponders locked.
I then scanned vertical separately and picked missing transponders so now I scan hori and vert separately.
Also with many scan trials a setting of 5 missed some transponders lower settings picked more transponders more channels. Even a setting of 1 picked more transponders than 5. Scans on Mea3 91.5
The ku frequency prob still exists but the above has helped in missing transponders.
We have many wild feeds here in America and the only way to pick them is by blind scan, here in America blind scan is a must.
Thanks for your suggestions.
Regards.
Chewie
Yes... Here too in Brazil. We have a lot of feeds everyday... Then, I don't want receiver only to watch channels, but much more...
Today, I did tests using OpenATV... then same problems. No blindscan plugin, no symbol rate 60.000. A lot of problems with T2-MI, missing drivers for siano (mygica s270) - smssdio, for example.
AirDigital don't have good support do fix a lot of reports around the all foruns.
Honestly, I'm really sorry to have bought this device.
Welcome to openATV for zgemmah9s
openatv 6.4 zgemmah9s
zgemmah9s login: root
Password:
root@zgemmah9s:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 14.5G 527.9M 13.3G 4% /
devtmpfs 470.6M 4.0K 470.6M 0% /dev
tmpfs 64.0K 4.0K 60.0K 6% /media
tmpfs 470.8M 168.0K 470.7M 0% /var/volatile
/dev/sda 14.6G 556.2M 14.0G 4% /media/sda
/dev/mmcblk0p1 14.5G 527.9M 13.3G 4% /media/mmcroot@zgemmah9s:~# dvbsnoop -s feinfo
dvbsnoop V1.4.55 -- https://github.com/OpenVisionE2/dvbsnoop
---------------------------------------------------------
FrontEnd Info...
---------------------------------------------------------
Device: /dev/dvb/adapter0/frontend0
Basic capabilities:
Name: "DVB-S2"
Frontend-type: QPSK (DVB-S)
Frequency (min): 950.000 MHz
Frequency (max): 2150.000 MHz
Frequency stepsiz: 1.000 MHz
Frequency tolerance: 29.500 MHz
Symbol rate (min): 0.000000 MSym/s
Symbol rate (max): 45.000000 MSym/s
Symbol rate tolerance: 0 ppm
Notifier delay: 0 ms
Frontend capabilities:
auto inversion
FEC 1/2
FEC 2/3
FEC 3/4
FEC 5/6
FEC 6/7
FEC 7/8
FEC 8/9
FEC AUTO
QPSK
auto transmission mode
FE_HAS_EXTENDED_CAPS
FE_CAN_2G_MODULATION
Current parameters:
Frequency: 1382.000 MHz
Inversion: AUTO
Symbol rate: 30.000000 MSym/s
FEC: FEC AUTO
root@zgemmah9s:~#0 ~ 45
I think is possible change this options, by driver, like Sf8008 (100 ~80.000)
Symbol rate (min): 0.000000 MSym/s
Symbol rate (max): 45.000000 MSym/sManual scan (60000)
Blindscan (C band)
Loop and wrong format
Drivers need to be improved.
Where have you bought the device?
Have you written to your dealer and Air Digital?
Have you tried manually putting all the parameters and scanning?
Not sure if I understood... This is a quick reply from my mobile... Try network parameter as well...
Display MoreDrivers need to be improved.
Where have you bought the device?
Have you written to your dealer and Air Digital?
Have you tried manually putting all the parameters and scanning?
Not sure if I understood... This is a quick reply from my mobile... Try network parameter as well...
I bought here, in Brazil from my friend. He send me after test a lot of problems, including installation Kodi (not enought flash).
I don't have Air Digital contact... I don't know if solve too, because I don't understand about drivers/code source to report. I think the best way is "images" owners to change own bsp/drivers.
Manually don't work for C band... don't change (only 10700 / 12750) parameters
You can't change drivers... Professionals have to do that, I fear...
You can enlarge your flash easily, using mSD card or fast USB stick (we in PurE2 did that): Expanding Zgemmas H9x and H9.2x flash to a Micro SD card or USB stick 2.0/3.0...
I contacted Air Digital on your behalf... waiting for an answer... ;)
I just saw that Edision OS mio 4K+ has T2-MI scanning in Menu > Setup > Service searching > Manual scan > DVB-S2 > T2MI PLP...
I think now only Edision and OCTAGON dvbs2X tuners...
All the rest, only astra-sm or another way... My zero 4k I make manually all steps here for 40.5w working fine.
I think the best one is Egami but since I have a problem with a blank skin list in the egami panel I will give my vote for open pli
Jesus Marx wept....
PURE2 6.5 2020/7/6
Don’t have an account yet? Register yourself now and be a part of our community!
